ADS8353-Q1
Automotive 16-bit 600-kSPS 2-channel simultaneous-sampling SAR ADC with single-ended inputs
ADS8353-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Functional Safety-Capable
- 16-bit resolution
- Simultaneous sampling of two channels
- Supports single-ended and pseudo-differential inputs
- Two software-selectable, unipolar input ranges:
- (0 V to VREF) or (0 V to 2x VREF)
- Up to 600-kSPS sampling speed
- Excellent dc performance:
- ±0.6-LSB DNL
- ±1-LSB INL
- ±0.05% gain error
- Excellent ac performance:
- 89-dB SNR
- –100-dB THD
- Dual, low-drift (10 ppm/°C), programmable 2.5-V internal reference
The ADS8353-Q1 is a 16-bit, dual-channel, high-speed, simultaneous-sampling, analog-to-digital converter (ADC) that supports single-ended and pseudo-differential analog inputs.
The ADS8353-Q1 includes two individually programmable reference sources that can be used for system-level gain calibration. Also, a flexible serial interface that can operate over a wide power-supply range enables easy communication with a large variety of host controllers. Power consumption for a given throughput can be optimized by using the two low-power modes supported by the device. The ADS8353-Q1 is fully specified over the temperature range (–40°C to +125°C) and is available in a 16-pin TSSOP package.
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | ADS8353-Q1 Automotive, 16-Bit, 2-Channel, Simultaneous-Sampling, 600-kSPS, Analog-to-Digital Converter datasheet (Rev. B) | PDF | HTML | 21 Jul 2022 |
Functional safety information | ADS8353-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 20 May 2021 | |
Certificate | ADS8353Q1EVM-PDK EU Declaration of Conformity (DoC) | 02 Jul 2020 | ||
EVM User's guide | ADS8353Q1EVM-PDK User's Guide | 14 Jan 2019 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
ADS8353Q1EVM-PDK — ADS8353-Q1 16-bit 600-kSPS 2-ch simultaneous-sampling SAR ADC performance demonstration kit (PDK)
The ADS8353-Q1 evaluation module (EVM) performance demonstration kit (PDK) is a platform for evaluating the performance of the ADS8353-Q1, which is a 16-bit, 2-channel, simultaneous-sampling, successive-approximation register (SAR) analog-to-digital converter (ADC) with SPI interface.
(...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Supported products & hardware
Products
Precision op amps (Vos<1mV)
General-purpose op amps
Audio op amps
Transimpedance amplifiers
High-speed op amps (GBW ≥ 50 MHz)
Power op amps
Video amplifiers
Line drivers
Transconductance amplifiers & laser drivers
Fully differential amplifiers
Precision ADCs
Biosensing AFEs
High-speed ADCs (≥10 MSPS)
Receivers
Touchscreen controllers
Difference amplifiers
Instrumentation amplifiers
Audio line receivers
Analog current-sense amplifiers
Digital power monitors
Analog current-sense amplifiers with integrated shunt resistor
Digital power monitors with integrated shunt resistor
Die & wafer services
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
TINA-TI — SPICE-based analog simulation program
Package | Pins | CAD symbols, footprints & 3D models |
---|---|---|
TSSOP (PW) | 16 | Ultra Librarian |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.