Home Data converters Analog-to-digital converters (ADCs) High-speed ADCs (≥10 MSPS)
Home
Data converters
Analog-to-digital converters (ADCs)
High-speed ADCs (≥10 MSPS)

ADS5204-Q1

OBSOLETE

Dual-Channel, 10-Bit, 40-MSPS Analog-to-Digital Converter - Qualified for Automotive Applications

Order now
Data sheet
ADS5204-Q1 is no longer in production
This product is no longer in production. New designs should consider an alternate product.
open-in-new Compare alternates
Same functionality with different pin-out to the compared device
ADC10040-Q1 ACTIVE 10-Bit, 40-MSPS Analog-to-Digital Converter (ADC) - Qualified for Automotive Applications This product is an enhanced stereo codec with enhanced digital effects
ADC10DL065 ACTIVE Dual-Channel, 10-Bit, 65-MSPS Analog-to-Digital Converter (ADC) This product is an enhanced stereo codec with enhanced digital effects

ADS5204-Q1

OBSOLETE
Data sheet Order now

Product details

Sample rate (max) (Msps) 40 Resolution (bps) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 300 Features Low Power Rating Automotive Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 275 Architecture Pipeline SNR (dB) 60.5 ENOB (bit) 9.7 SFDR (dB) 75 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 40 Resolution (bps) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 300 Features Low Power Rating Automotive Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 275 Architecture Pipeline SNR (dB) 60.5 ENOB (bit) 9.7 SFDR (dB) 75 Operating temperature range (°C) -40 to 85 Input buffer Yes
TQFP (PFB) 48 81 mm² 9 x 9
  • Qualified for Automotive Applications
  • 3.3-V Single-Supply Operation
  • Dual Simultaneous Sample-and-Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • Programmable Gain Amplifier: 0 dB to 18 dB
  • Separate Serial Control Interface
  • Single or Dual Parallel Bus Output
  • 60-dB SNR at fIN = 10.5 MHz
  • 73-dB SFDR at fIN = 10.5 MHz
  • Low Power: 275 mW
  • 300-MHz Analog Input Bandwidth
  • 3.3-V TTL/CMOS-Compatible Digital I/O
  • Internal or External Reference
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • TQFP-48 Package
  • APPLICATIONS
    • Digital Communications (Baseband Sampling)
    • Portable Instrumentation
    • Video Processing
  • Qualified for Automotive Applications
  • 3.3-V Single-Supply Operation
  • Dual Simultaneous Sample-and-Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • Programmable Gain Amplifier: 0 dB to 18 dB
  • Separate Serial Control Interface
  • Single or Dual Parallel Bus Output
  • 60-dB SNR at fIN = 10.5 MHz
  • 73-dB SFDR at fIN = 10.5 MHz
  • Low Power: 275 mW
  • 300-MHz Analog Input Bandwidth
  • 3.3-V TTL/CMOS-Compatible Digital I/O
  • Internal or External Reference
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • TQFP-48 Package
  • APPLICATIONS
    • Digital Communications (Baseband Sampling)
    • Portable Instrumentation
    • Video Processing

The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.

The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.
filter Find other High-speed ADCs (≥10 MSPS)
Download

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet Dual 10-Bit 40-MSPS Low-Power ADC With PGA datasheet (Rev. A) 23 Jun 2008

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location