Calculation tool
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
Calculator tool to adjust the power supply's output voltage with an analog input voltage
Data sheet
TPS82130
- 3-mm × 2.8-mm × 1.5-mm MicroSiP package
- 3-V to 17-V input range
- 3-A continuous output current
- DCS-Control topology
- Power save mode for light-load efficiency
- 20-µA operating quiescent current
- 0.9-V to 6-V adjustable output voltage
- 100% duty cycle for lowest dropout
- Power-good output
- Programmable soft start-up with tracking
- Thermal shutdown protection
- –40°C to 125°C operating temperature range
- Mandarin data sheet available
- Create a custom design using the TPS82130 with the WEBENCH Power Designer
The TPS82130 is a 17-V input 3-A step-down converter MicroSiP power module optimized for small solution size and high efficiency. The module integrates a synchronous step-down converter and an inductor to simplify design, reduce external components, and save PCB area. The low profile and compact solution is suitable for automated assembly by standard surface mount equipment.
To maximize efficiency, the converter operates in PWM mode with a nominal switching frequency of 2 MHz and automatically enters power save mode operation at light load currents. In power save mode, the device operates with 20-µA (typical) quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.
Similar products you might be interested in
Pin-for-pin with same functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 35 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
TPS82130EVM-720 — TPS82130 evaluation module 17-V input 3-A step-down converter with integrated inductor
The TPS82130EVM-720 is designed to help the user easily evaluate and test the operation and functionality of the TPS82130 power module. The EVM converts a 3-V to 17-V input voltage to a 1.8-V regulated output voltage at up to 3A of output current. The TPS82130 includes the IC and inductor to (...)
Simulation model
TPS82130 PSpice Unencrypted Transient Model (Rev. D)
SLVMBG8D.ZIP (180 KB) - PSpice Model
Simulation model
TPS82130 TINA-TI Inverting Buck-Boost Startup Transient Model
SLVMDE6.TSC (501 KB) - TINA-TI Spice Model
Simulation model
TPS82130 TINA-TI Inverting Buck-Boost Steady State Transient Model
SLVMDE7.TSC (486 KB) - TINA-TI Spice Model
Simulation model
TPS82130 TINA-TI Startup Transient Model
SLVMDE4.TSC (502 KB) - TINA-TI Spice Model
Simulation model
TPS82130 TINA-TI Steady State Transient Model
SLVMDE5.TSC (521 KB) - TINA-TI Spice Model
Reference designs
TIDA-010054 — Bi-directional, dual active bridge reference design for level 3 electric vehicle charging stations
This reference design provides an overview on the implementation of a single-phase dual active bridge (DAB) DC/DC converter. DAB topology offers advantages like soft-switching commutations, a decreased number of devices and high efficiency. The design is beneficial where power density, cost, (...)
Reference designs
TIDA-01405 — 3V to 15.2V Input, 2A, –1.8V Inverting Power Module Reference Design for up to 125°C
The TIDA-01405 design demonstrates an inverting power module (voltage inverter) to generate a –1.8V rail at up to 2A of current from a 3V to 15.2V input voltage. Such a negative voltage is required for many communications equipment systems as well as industrial equipment, such as test and (...)
Reference designs
TIDA-01457 — 3- to 11.5-VIN, –5-VOUT, 1.5-A Inverting Power Module Reference Design for Small, Low-Noise Systems
This small and simple, low-noise inverting power module design (voltage inverter) cleanly supports a –5-V output voltage at up to 1.5 A of current from a 3- to 11.5-V input. Featuring TI’s TPS82130 MicroSiP™ power module step-down converter in an inverting buck-boost topology, (...)
Reference designs
TIDA-01022 — Flexible 3.2-GSPS multi-channel AFE reference design for DSOs, radar and 5G wireless test systems
This high speed multi-channel data capture reference design enables optimum system performance. System designers needs to consider critical design parameters like clock jitter and skew for high speed multi-channel clock generation, which affects overall system SNR, SFDR, channel to channel skew (...)
Reference designs
TIDA-01028 — 12.8-GSPS analog front end reference design for high-speed oscilloscope and wide-band digitizer
This reference design provides a practical example of interleaved RF-sampling analog-to-digital converters (ADCs) to achieve a 12.8-GSPS sampling rate. This is done by time interleaving two RF-sampling ADCs. Interleaving requires a phase shift between the ADCs, which this reference design achieves (...)
Reference designs
TIDA-010128 — Scalable 20.8 GSPS reference design for 12 bit digitizers
This reference design describes a 20.8 GSPS sampling system using RF sampling analog-to-digital converters (ADCs) in time interleaved configuration. Time interleaving method is a proven and traditional way of increasing sample rate, however, matching individual ADCs offset, gain and sampling time (...)
Reference designs
PMP21254 — 160-A, four-phase reference design with integrated FET controller
This reference design is for powering high current, low voltage ASICs and FPGAs from a 5-V or 12-V rail. The design is optimized for high-density and supports PMBus with current, voltage and temperature telemetry, if desired. A test report is included.
Reference designs
PMP21814 — 4-Phase, 160-A synchronous buck converter reference design for communications processor power
This reference design uses four TPS546D24A converters with integrated MOSFETs to support a full load of 160A at a 0.9V output. The system operates at a switching frequency of 650 kHz and has a PMBus interface that can be used to configure key converter parameters, including internal compensation. (...)
Reference designs
TIDA-010122 — Reference design synchronizing data converter DDC and NCO features for multi-channel RF systems
This reference design addresses synchronization design challenges associated with emerging 5G adapted applications like massive multiple input multiple output (mMIMO), phase array radar and communication payload. The typical RF front end contains antenna, low-noise amplifier (LNA), mixer, local (...)
Reference designs
TIDA-010011 — High efficiency power supply architecture reference design for protection relay processor module
This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| uSIP (SIL) | 8 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.