Home Power management AC/DC & DC/DC converters (integrated FET)
Home
Power management
AC/DC & DC/DC converters (integrated FET)

TPS62770

ACTIVE

Tiny Single-chip Dual Solution with 360nA Iq Buck and up to 15V Boost in WCSP

Order now
Data sheet

TPS62770

ACTIVE
Data sheet Order now

Product details

Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck Type Converter Iout (max) (A) 0.3 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 2000 Features Adaptive/Dynamic Voltage Scaling, Enable, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed Control mode DCS-Control Vout (min) (V) 1 Vout (max) (V) 15 Iq (typ) (µA) 0.37 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck Type Converter Iout (max) (A) 0.3 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 1200 Switching frequency (max) (kHz) 2000 Features Adaptive/Dynamic Voltage Scaling, Enable, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed Control mode DCS-Control Vout (min) (V) 1 Vout (max) (V) 15 Iq (typ) (µA) 0.37 Duty cycle (max) (%) 100
DSBGA (YFP) 16 3.24 mm² 1.8 x 1.8
  • VIN Range 2.5 V to 5.5 V
  • 370 nA Iq Step-Down Converter
    • 8 Selectable Output Voltages (1.0V to 3.0V)
    • 300 mA Output Current
    • Output Discharge Function
  • Slew Rate Controlled Load Switch with Discharge
    Function
  • Dual Mode Step-Up Converter
    • Load Disconnect
    • Constant Output Voltage Adjustable up to 15 V
      (VFB 0.8 V) / 12 V Fixed
    • LED Current Driver with PWM to Current
      Conversion (max VFB Voltage 200 mV @ D =
      100%)
  • Tiny 16pin 1.58 × 1.58mm WCSP Package 0.4mm
    pitch
  • VIN Range 2.5 V to 5.5 V
  • 370 nA Iq Step-Down Converter
    • 8 Selectable Output Voltages (1.0V to 3.0V)
    • 300 mA Output Current
    • Output Discharge Function
  • Slew Rate Controlled Load Switch with Discharge
    Function
  • Dual Mode Step-Up Converter
    • Load Disconnect
    • Constant Output Voltage Adjustable up to 15 V
      (VFB 0.8 V) / 12 V Fixed
    • LED Current Driver with PWM to Current
      Conversion (max VFB Voltage 200 mV @ D =
      100%)
  • Tiny 16pin 1.58 × 1.58mm WCSP Package 0.4mm
    pitch

The TPS62770 is a tiny power solution for wearable applications including a 370nA ultra low Iq step-down converter, a slew rate controlled load switch and a dual mode step-up converter. The output voltage of the step-down converter can be selected with three VSEL pins between 1.0 V, 1.05 V, 1.1 V, 1.2 V, 1.8 V, 1.9 V, 2.0 V and 3.0 V. The output voltage can be changed during operation. In shutdown mode, the output of the step-down converter is pulled to GND. The integrated load switch is internally connected to the output of the step-down converter and features slew rate control during turn on phase. Once turned off, its output is connected to GND.

The dual mode step-up converter can generate a constant output voltage up to 15 V, such as PMOLED supply; or, a constant output current, such as LED back light supply. The output voltage can be adjusted up to 15 V with external resistors, or set to fixed 12 V by connecting the FB pin to VIN. The device features an internal over voltage protection of 17.7 V in case the FB node is left open or tight to GND. It includes an internal rectifier and load disconnect function. When used as constant output current driver, the device offers a PWM to analog converter to scale down the reference voltage according to the duty cycle of the PWM signal.

The device is available in a small 16pin 0.4mm pitch WCSP package.

The TPS62770 is a tiny power solution for wearable applications including a 370nA ultra low Iq step-down converter, a slew rate controlled load switch and a dual mode step-up converter. The output voltage of the step-down converter can be selected with three VSEL pins between 1.0 V, 1.05 V, 1.1 V, 1.2 V, 1.8 V, 1.9 V, 2.0 V and 3.0 V. The output voltage can be changed during operation. In shutdown mode, the output of the step-down converter is pulled to GND. The integrated load switch is internally connected to the output of the step-down converter and features slew rate control during turn on phase. Once turned off, its output is connected to GND.

The dual mode step-up converter can generate a constant output voltage up to 15 V, such as PMOLED supply; or, a constant output current, such as LED back light supply. The output voltage can be adjusted up to 15 V with external resistors, or set to fixed 12 V by connecting the FB pin to VIN. The device features an internal over voltage protection of 17.7 V in case the FB node is left open or tight to GND. It includes an internal rectifier and load disconnect function. When used as constant output current driver, the device offers a PWM to analog converter to scale down the reference voltage according to the duty cycle of the PWM signal.

The device is available in a small 16pin 0.4mm pitch WCSP package.
filter Find other AC/DC & DC/DC converters (integrated FET)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Similar functionality to the compared device
TPS62740 ACTIVE 2.2V-5.5V input, ultra-low-power 300mA step-down buck DCDC converter with 360nA Iq Single-channel low-IQ buck converter

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TPS62770 Multi-Rail DC/DC Converter For Wearable Applications datasheet (Rev. B) PDF | HTML 11 Apr 2016
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 23 May 2022
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 14 Oct 2019
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 14 Jun 2019
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 22 Jun 2018
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 24 Oct 2016
EVM User's guide TPS62770EVM-734 Users Guide 10 Mar 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS62770EVM-734 — TPS62770 Multi-Rail DC/DC Converter Evaluation Module

The TPS62770EVM-734 is designed to help the users easily evalaute and test the operation and functionality of the TPS62770 Multi Rail DC/DC Converter. The EVM provides two independend power stage solutions, optimized for small solution as well as providing full feature set. The power stage provides (...)

User guide: PDF
Not available on TI.com
Simulation model

TPS62770 PSpice Unencrypted Transient Model (Rev. A)

SLVMBI1A.ZIP (280 KB) - PSpice Model
Download
Calculation tool

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
Supported products & hardware

Supported products & hardware

Products
Precision DACs (≤10 MSPS)
DAC43401 — 8-bit 1-channel voltage-output smart DAC with Hi-Z, EEPROM, waveform generator and comparator DAC43608 — 8-bit, 8-channel, I2C, voltage-output DAC in tiny QFN package DAC53401 — 10-bit 1-channel voltage-output smart DAC with Hi-Z, EEPROM, waveform generator and comparator DAC53608 — 10-Bit, 8-channel, I2C, voltage output DAC in tiny QFN package
Power modules (integrated inductor)
TPS82084 — 2-A, High-efficiency step-down converter module with integrated inductor TPS82085 — 3A, High-Efficiency Step-Down Converter Module with Integrated Inductor TPS82130 — 17-V input 3-A step-down converter module with integrated inductor TPS82140 — 17V Input 2A Synchronous Step-Down Converter MicroSiP™ Module With Integrated Inductor TPS82150 — 17V Input 1A Synchronous Step-Down Converter MicroSiP™ Module With Integrated Inductor TPSM82810 — 2.75-V to 6-V, 4-A step-down module with adjustable-frequency & tracking in 3 x 4-mm μSIP package TPSM82813 — 6V 3A step-down module with optional frequency synchronization, adjustable soft-start and tracking TPSM82821 — 5.5-V input, 1-A step-down module with integrated inductor in 2 x 2.5 x 1.1-mm μSIP package TPSM82822 — 5.5-V input, 2-A step-down module with integrated inductor in 2 x 2.5 x 1.1-mm μSIP package
AC/DC & DC/DC converters (integrated FET)
TLV62065 — 3MHz 2A Step Down Converter in 2x2 SON Package TLV62080 — 1.2A High Efficient Step Down Converter in 2x2mm SON Package TLV62084 — 2A High Efficient Step Down Converter in 2x2mm SON Package TLV62084A — 2A High Efficient Step Down Converter in 2x2mm SON Package TLV62085 — 3-A High Efficiency Step-Down Converter in 2x2 QFN TLV62090 — 3A High Efficiency Step Down Converter in 3x3mm QFN Package TLV62095 — 4A Synchronous Step Down Converter with DCS Control TLV62130 — 3-17V 3A Step-Down Converter in 3x3 QFN Package TLV62130A — 3-17V 3A Step-Down Converter with DCS-Control in 3x3 QFN Package TLV62150 — 4-17V 1A Step-Down Converter with DCS-Control™ TLV62150A — 4-17V, 1A STEP-DOWN CONVERTER with DCS-Control in 3x3 QFN Package TLV62565 — 1.5A Buck Converter in SOT23 Package TLV62566 — 1.5A Buck Converter with Power Good, in SOT23 Package TLV62568 — 2.5V-5.5V input, 1A high efficiency step-down buck converter in SOT23 and SOT563 package TLV62568A — 2.5V-5.5V input, 1A high efficiency step-down buck converter with forced PWM in small SOT563 package TLV62569 — 2.5V-5.5V input, 2-A high efficiency step-down buck converter in SOT23 and SOT563 package TLV62569A — 2A High Efficiency Step-down Buck Converter with forced PWM in SOT Package TLV62585 — 2.5V-5.5V input, 3-A high efficiency step-down converter in 2x2 QFN or SOT563 package TPS62000 — Adjustable, 600-mA, 95% Efficient Step-Down Converter TPS62000-HT — High Temperature High-Efficiency Step-Down Low Power DC-DC Converter TPS62020 — Adjustable, 600-mA, 95% Efficient Step-Down Converter, 18uA, MSOP-10 TPS62040 — Adjustable, 1.2-A, 95% efficient step-down converter, 18 uA, MSOP-10 and QFN TPS62050 — Adjustable, 800-mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10 TPS62056 — 3.3-V Output, 800-mA, 10V Vin, 95% Efficient Step-Down Converter in MSOP-10 TPS62060 — 3MHz, 1.6A Step-Down Converter in 2x2 SON Package TPS62065 — 3MHz, 2A Step-Down Converter in 2x2 SON Package TPS62065-Q1 — 3MHz, 2A Automotive Step-Down Converter in 2x2 SON Package TPS62067 — 3MHz, 2A Step-Down Converter in 2x2 SON Package TPS62067-Q1 — Automotive 3-MHz 2-A step-down converter in 2×2 SON package TPS62080 — 1.2A High Efficient Step Down Converter in 2x2mm SON Package, with Adjustable Vout TPS62080A — 1.2A High Efficient Step Down Converter in 2x2mm SON Package TPS62085 — 3-A Step-Down Converter with DCS-Control and Hiccup Short Circuit Protection in 2x2 HotRod Package TPS62088 — 2.4-V to 5.5-V input, tiny 6-pin 3-A step-down converter in 1.2-mm x 0.8-mm WCSP TPS62090 — 3A, 6V input, up to 97% efficiency, Synchronous Step Down Converter with DCS™ Control TPS62090-Q1 — Automotive: 3A, 2.5 to 6V input, up to 97% efficiency, 3x3 QFN, Step-Down Converter TPS62095 — 4A Synchronous Step Down Converter with DCS Control TPS62097 — 2-A Step Down Converter with Selectable Switching Frequency in HotRod package TPS62097-Q1 — 2A Automotive Step-Down Converter in 3x3 QFN With Wettable Flanks TPS62100 — Multimode 300kHz Synchronous Buck Converter with Adjustable Output TPS62110 — Adjustable, 1.5-A, 17-V Vin Step-Down Converter in QFN-16 TPS62110-EP — Enhanced Product 17 V, 1.5 A Synchronous Step-Down Converter TPS62110-HT — High Temperature 17-V, 1.5-A, Synchronous Step-Down Converter TPS62110-Q1 — Automotive 3V to 17V, 1.5A Buck Converter in QFN-16 package TPS62113 — 1.5-A, 17-Vin Step-Down Converter with LBI function in QFN-16 TPS62120 — 15V, 75mA, 96% efficiency Step-Down Converter with DCS-Control TPS62122 — 15V, 75mA, 96% efficiency Step-Down Converter TPS62125 — 3V-17V, 300mA Buck Converter With Adjustable Enable Threshold And Hysteresis TPS62130 — 3-17V 3A Step-Down Converter with DCS-Control in 3x3 QFN Package TPS62130A — 3-V to 17-V, 3-A step-down converter with DCS-control in 3x3 QFN package TPS62130A-Q1 — TPS62130A-Q1 3 to 17-V 3-A Automotive Step-Down Converter in 3 × 3 QFN Package TPS62135 — 3-17V 4.0A Step-Down Converter with 1% accuracy and PFM/Forced-PWM in 2x3QFN TPS62136 — 3-17V 4.0A Step-Down Converter with 1% accuracy and PFM/Forced-PWM in 2x3QFN TPS62140 — 3–17V 2A Step-Down Converter with DCS-Control in 3x3 QFN package TPS62140A — 3–17V 2A Step-Down Converter with DCS-Control in 3x3 QFN package TPS62147 — 3-17V 2.0A Step-Down Converter with 1% accuracy and PFM/Forced-PWM in 2x3QFN TPS62148 — 3-17V 2.0A Step-Down Converter with 1% accuracy and PFM/Forced-PWM in 2x3QFN TPS62150 — 3–17V 1A Step-Down Converter with DCS-Control in 3x3 QFN package TPS62150A — 3-17V 1A 3MHz Step-Down Converter with DCS-Control in 3x3 QFN Package TPS62150A-Q1 — TPS62150A-Q1 3 to 17-V 1-A AUTOMOTIVE Step-Down Converter in 3 × 3 QFN Package TPS62160 — 3V-17V 1A Step-Down Converters with DCS-Control™ TPS62160-Q1 — 3V-17V 1A Automotive Step-Down Converters in 2x2SON TPS62170 — 3–17V 0.5A Step-Down Converter with DCS-Control in 2x2 QFN package TPS62170-Q1 — 3-17V 0.5A Automotive Step-Down Converter in 2x2 QFN package TPS62175 — 28V, 0.5A Step-Down Converter with SNOOZE Mode TPS62180 — 4-V to 15-V, 6-A synchronous buck converter with power good, 1% accuracy, and adjustable soft start TPS62184 — 4-V to 17-V, 6-A synchronous buck converter with power good, 1% accuracy, and adjustable soft start TPS62200 — Adjustable, 300-mA, 95% Efficient Step-Down Converter in SOT-23 TPS62220 — Adjustable, 400-mA, 95% Efficient Step-Down Converter, 15uA, ThinSOT-23 TPS62240 — 2.25MHz 300mA Step-Down Converter in 2x2mm SON/TSOT23 Package TPS62250 — 2.25MHz, 1A Peak Current Limited Step-Down Converter TPS62260 — 2.25MHz 600mA Step-Down Converter in 2x2mm SON/TSOT23 Package TPS62260-Q1 — Automotive 2V to 6V, 2.25MHz Fixed Frequency 600mA Buck Converter in 2x2mm SON/TSOT23 Package TPS62290 — 2.25MHz 1A Step-Down Converter in 2x2mm SON Package TPS62290-Q1 — Automotive 2.3V to 6V, 2.25MHz Fixed Frequency 1A Buck Converter in 2x2mm SON/TSOT23 Package TPS62400 — Dual, Adjustable, 400mA and 600mA, 2.25MHz Step-Down Converter with 1-Wire Interface in QFN TPS62400-Q1 — Automotive Catalog Dual, Adjustable, 400mA & 600mA, 2.25MHz Step-Down Converter w/ 1-Wire Interface TPS62410 — 2.25MHZ 2x800mA Dual Step-Down Converter with 1-Wire Interface in QFN TPS62410-Q1 — Automotive 2.5V to 6V, 2.25MHz Fixed Frequency Dual (800mA/800mA) Buck Converter TPS62420 — Dual, Adjustable, 600mA and 1000mA, 2.25MHz Step-Down Converter with 1-Wire Interface in QFN TPS62420-Q1 — Automotive 2.5V to 6V, 2.25MHz Fixed Frequency Dual (1A/600mA) Buck Converter with 1-Wire Interface TPS62480 — 6A, 2.4V-5.5V input, Synchronous step-down converter with PG Output, Adjust. Soft-start and Optional TPS62510 — Adjustable, 96% Efficiency, 1.5A Buck Converter for low input voltages TPS62560 — 2.25MHz 600mA Step-Down Converter in 2x2mm SON Package TPS62561 — 2.25MHz 600mA Step-Down Converter in TSOT23 Package TPS62590 — 2.25MHz, 1A Step-Down Converter in 2 x 2 SON Package TPS62590-Q1 — Automotive 2.5V to 6V, 2.25MHz Fixed Frequency 1A Buck Converter in 2x2mm SON Package TPS62750 — 2.25MHz, Step-Down Converter w/ Programmable Input Current Limits for USB powered Applications TPS62751 — 2.25MHz, Step-Down Converter w/ Programmble Input Current Limits for USB powered Applications TPS62770 — Tiny Single-chip Dual Solution with 360nA Iq Buck and up to 15V Boost in WCSP TPS62810-Q1 — Automotive 2.75-V to 6-V, 4-A step-down converter in a 2mm x 3mm wettable-flanks QFN package TPS62810M — 2.75-V to 6-V, 4-A step-down converter in a 2-mm x 3-mm QFN package with -55C extended temperature TPS62821 — 2.4-V to 5.5-V input, 1-A step-down converter with 1% accuracy in 1.5-mm x 2-mm VSON-HR package TPS62822 — 2.4-V to 5.5-V input, 2-A step-down converter with 1% accuracy in 1.5-mm x 2-mm VSON-HR package TPS62823 — 2.4-V to 5.5-V input, 3-A step-down converter with 1% accuracy in 1.5-mm x 2-mm VSON-HR package TPS62825 — 2.4-V to 5.5-V input, 2-A step-down converter with 1% accuracy in 1.5-mm x 1.5-mm QFN TPS62826 — 2.4-V-5.5-V input, 3-A step-down converter with 1% accuracy in 1.5-mm x 1.5-mm VSON-HR package TPS62827 — 2.5-V to 5.5-V input, 4-A step-down converter with 1% accuracy in 1.5-mm x 1.5-mm QFN
Download
Reference designs

PMP21884 — Tiny, ultra-low IQ DC/DC power supply with battery charging reference design for wearables

This is a highly-integrated power supply reference design for smartwatches and fitness trackers enabling ultra-low IQ that is ultra-small (48 sq mm). Supply includes seven power rails including battery charger, LDO, DC/DC buck converters and integrated boost converter for heart rate monitor, AFE (...)
Test report: PDF
Schematic: PDF
Reference designs

PMP9792 — Multi-Rail, Low Iq Power Reference Design for Wearable Applications

Wearable applications like smart wristbands provide two main power rails to supply the wireless MCU, sensors, and the display. They are very tiny, and therefore require the smallest solution size possible. This reference design shows a full solution based on the TPS62770 multi-rail DC/DC (...)
Test report: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
DSBGA (YFP) 16 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos