Home Motor drivers Brushed DC (BDC) motor drivers
Home
Motor drivers
Brushed DC (BDC) motor drivers

DRV8262

ACTIVE

65-V single or dual H-bridge motor driver with integrated current sense and regulation

Order now
Data sheet

DRV8262

ACTIVE
Data sheet Order now

Product details

Number of full bridges 2 Vs (min) (V) 4.5 Vs ABS (max) (V) 70 Peak output current (A) 10 RDS(ON) (HS + LS) (mΩ) 100 Sleep current (µA) 2 Control mode PH/EN, PWM Control interface Hardware (GPIO) Features Current Regulation, Current sense Amplifier, Integrated Current Sensing, Low-Power Sleep Mode Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 4.5 Vs ABS (max) (V) 70 Peak output current (A) 10 RDS(ON) (HS + LS) (mΩ) 100 Sleep current (µA) 2 Control mode PH/EN, PWM Control interface Hardware (GPIO) Features Current Regulation, Current sense Amplifier, Integrated Current Sensing, Low-Power Sleep Mode Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (DDV) 44 113.4 mm² 14 x 8.1 HTSSOP (DDW) 44 113.4 mm² 14 x 8.1
    • Single or dual H-bridge motor driver
    • Drives One or two brushed-DC motors
    • One stepper motor
    • One or two thermoelectric coolers (TEC)
  • 4.5V to 60V operating supply voltage range
  • Low RDS(ON):
    • 100mΩ HS + LS (Dual H-Bridge)
    • 50mΩ HS + LS (Single H-Bridge)
  • High output current capability:
    • Dual H-Bridge (24V, 25 °C):
      • 8A peak with DDW package
      • 16A peak with DDV package
    • Single H-Bridge (24V, 25 °C):
      • 16A peak with DDW package
      • 32A peak with DDV package
  • Programmable interface of operation -
    • Phase/Enable (PH/EN)
    • PWM (IN/IN)
  • Integrated current sense and regulation
    • Current sensing for high-side MOSFETs
    • Sense output (IPROPI) for each H-bridge
    • ± 4 % sense accuracy at maximum current
  • Separate logic supply voltage (VCC)
  • Configurable off-Time PWM chopping
    • 7, 16, 24 or 32µs

  • Programmable fault recovery method

  • Supports 1.8V, 3.3V, 5.0V logic inputs
  • Low-current sleep mode (3µA)
  • Protection features
    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)
    • Fault condition output (nFAULT)
    • Single or dual H-bridge motor driver
    • Drives One or two brushed-DC motors
    • One stepper motor
    • One or two thermoelectric coolers (TEC)
  • 4.5V to 60V operating supply voltage range
  • Low RDS(ON):
    • 100mΩ HS + LS (Dual H-Bridge)
    • 50mΩ HS + LS (Single H-Bridge)
  • High output current capability:
    • Dual H-Bridge (24V, 25 °C):
      • 8A peak with DDW package
      • 16A peak with DDV package
    • Single H-Bridge (24V, 25 °C):
      • 16A peak with DDW package
      • 32A peak with DDV package
  • Programmable interface of operation -
    • Phase/Enable (PH/EN)
    • PWM (IN/IN)
  • Integrated current sense and regulation
    • Current sensing for high-side MOSFETs
    • Sense output (IPROPI) for each H-bridge
    • ± 4 % sense accuracy at maximum current
  • Separate logic supply voltage (VCC)
  • Configurable off-Time PWM chopping
    • 7, 16, 24 or 32µs

  • Programmable fault recovery method

  • Supports 1.8V, 3.3V, 5.0V logic inputs
  • Low-current sleep mode (3µA)
  • Protection features
    • VM undervoltage lockout (UVLO)
    • Charge pump undervoltage (CPUV)
    • Overcurrent protection (OCP)
    • Thermal shutdown (OTSD)
    • Fault condition output (nFAULT)

The DRV8262 is a wide-voltage, high-power, H-bridge motor driver for a wide variety of industrial applications. The device integrates two H-bridges to drive one or two DC motors or a bipolar stepper motor. The DRV8262 supports up to 16A peak current in the dual H-bridge mode and up to 32A in the single H-bridge mode. The device also integrates current sensing and regulation, current sense output and protection circuitry.

Integrated current sensing across the high-side MOSFETs allows the driver to regulate the motor current during startup and high load events. A current limit can be set with an adjustable external voltage reference. The device also provides output current proportional to the motor current for each H-bridge. Integrated sensing removes the need for shunt resistors, reducing board area and system cost.

A low-power sleep mode is provided to achieve ultra- low quiescent current. Internal protection features are provided for supply undervoltage lockout (UVLO), charge pump undervoltage (CPUV), output over current (OCP), and device overtemperature (OTSD).

The DRV8262 is a wide-voltage, high-power, H-bridge motor driver for a wide variety of industrial applications. The device integrates two H-bridges to drive one or two DC motors or a bipolar stepper motor. The DRV8262 supports up to 16A peak current in the dual H-bridge mode and up to 32A in the single H-bridge mode. The device also integrates current sensing and regulation, current sense output and protection circuitry.

Integrated current sensing across the high-side MOSFETs allows the driver to regulate the motor current during startup and high load events. A current limit can be set with an adjustable external voltage reference. The device also provides output current proportional to the motor current for each H-bridge. Integrated sensing removes the need for shunt resistors, reducing board area and system cost.

A low-power sleep mode is provided to achieve ultra- low quiescent current. Internal protection features are provided for supply undervoltage lockout (UVLO), charge pump undervoltage (CPUV), output over current (OCP), and device overtemperature (OTSD).
filter Find other Brushed DC (BDC) motor drivers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet DRV8262 : 60V, Single or Dual H-Bridge Motor Driver with Current Sense Output datasheet (Rev. B) PDF | HTML 31 Oct 2024
Application note Integrated FETs vs External FETs: Performance Comparison of Motor Drivers PDF | HTML 22 Dec 2022
Certificate DRV8262VEVM EU RoHS Declaration of Conformity (DoC) 16 Dec 2022
Certificate DRV8262EVM EU RoHS Declaration of Conformity (DoC) 01 Sep 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV8262EVM — DRV8262 evaluation module for single or dual H-bridge motor driver in DDW package

The DRV8262EVM showcases the features and performance of the DRV8262DDWR. It integrates two H-bridges to drive two DC motors or a bipolar stepper motor. The two H-bridges can be paralleled together to drive one DC motor with higher current.

The device operates over a 4.5-V to 65-V supply range and (...)

User guide: PDF | HTML
Not available on TI.com
Evaluation board

DRV8262VEVM — DRV8262 evaluation module for single or dual H-bridge motor driver in DDV package

The DRV8262VEVM showcases the features and performance of the DRV8262DDVR. It integrates two H-bridges to drive two DC motors or a bipolar stepper motor. The two H-bridges can be paralleled together to drive one DC motor with higher current.

The device operates over a 4.5-V to 65-V supply range (...)

User guide: PDF | HTML
Not available on TI.com
Support software

DRV84XX-DRV89X2-DRV82X2-EVM-SOFTWARE — EVM GUI and device firmware for DRV84XX_DRV89X2_DRV82X2 family

Zipped folder containing manifests and installers for both the GUI and the firmware of the DRV84XX_DRV89X2_DRV82X2 family of devices. Detailed instructions on how to use the GUI can be found in the User's Guide of the DRV84XX-DRV89X2-DRV82X2-EVM.
Supported products & hardware

Supported products & hardware

Products
Brushed DC (BDC) motor drivers
DRV8952 — 50-V four-channel half-bridge driver with current sense outputs DRV8962 — 65-V four-channel half-bridge driver with current sense outputs DRV8262 — 65-V single or dual H-bridge motor driver with integrated current sense and regulation
Stepper motor drivers
DRV8462 — 65V, 10A dual H-bridge stepper motor driver with smart tune, stall detect and auto torque DRV8452 — 50-V, 5-A, dual H-bridge stepper motor driver with smart tune, stall detect and auto-torque DRV8461 — 65-V, 3-A dual H-bridge stepper motor driver with smart tune, stall detect and auto-torque
Hardware development
Evaluation board
DRV8462EVM — DRV8462 evaluation module for stepper motor driver with automatic microstepping DRV8262EVM — DRV8262 evaluation module for single or dual H-bridge motor driver in DDW package DRV8962EVM — DRV8962 evaluation module for quad half-bridge motor driver with current sense output DRV8461EVM — DRV8461 evaluation module for DDW package DRV8462VEVM — DRV8462 evaluation module for stepper motor driver in DDV package DRV8262VEVM — DRV8262 evaluation module for single or dual H-bridge motor driver in DDV package DRV8962VEVM — DRV8962 evaluation module for quad half-bridge motor driver in DDV package
Launch Download options
Package Pins CAD symbols, footprints & 3D models
HTSSOP (DDV) 44 Ultra Librarian
HTSSOP (DDW) 44 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos