Calculation tool
SBAR013 — Isolated Amplifier Voltage Sensing Excel Calculator
This calculator provides estimates of the errors associated with using isolation amplifier devices in a voltage sensing configuration.
AMC3330-Q1
Automotive, ±1-V input, precision voltage sensing reinforced isolated amplifier with int. DC/DC
Data sheet
AMC3330-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to 125°C, TA
- 3.3V or 5V single supply operation with integrated DC/DC converter
- ±1V input voltage range optimized for voltage measurements with high input impedance
- Fixed gain: 2.0
- Low DC errors:
- Gain error: ±0.2% (max)
- Gain drift: ±45ppm/°C (max)
- Offset error: ±0.3mV (max)
- Offset drift: ±4µV/°C (max)
- Nonlinearity: ±0.02% (max)
- High CMTI: 85kV/µs (min)
- System-level diagnostic features
- Safety-related certifications:
- 6000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 4250VRMS isolation for 1 minute per UL1577
- Meets CISPR-11 and CISPR-25 EMI standards
The AMC3330-Q1 is a precision, isolated amplifier with a fully integrated, isolated DC/DC converter that allows single-supply operation from the low-side of the device. The reinforced capacitive isolation barrier is certified according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 and separates sections of the system that operate on different common-mode voltage levels and protects low-voltage domains from damage.
The input of the AMC3330-Q1 is optimized for direct connection to high-impedance, voltage-signal sources such as a resistor-divider network to sense high-voltage signals. The integrated isolated DC/DC converter allows measurement of non-ground-referenced signals and makes the device a unique solution for noisy, space-constrained applications.
The excellent performance of the device supports accurate voltage monitoring and control. The integrated DC/DC converter fault-detection and diagnostic output pin of the AMC3330-Q1 simplify system-level design and diagnostics.
The AMC3330-Q1 is specified over the temperature range of –40°C to +125°C.
Similar products you might be interested in
Drop-in replacement with upgraded functionality to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 32 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
AMC3330EVM — AMC3330 precision reinforced isolated amplifier with integrated DC/DC converter evaluation module
The AMC3330 evaluation module (EVM) is an evaluation platform for the AMC3330 product, a precision isolated amplifier with an integrated DC/DC converter that powers the high side of the amplifier. AMC3330 is a 7-kV reinforced isolated amplifier designed for use in bipolar voltage-measuring (...)
Simulation model
AMC3330 and AMC3330-Q1 TINA-TI Spice Model (Rev. B)
SBAM446B.TSC (152 KB) - TINA-TI Spice Model
Calculation tool
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
This calculator provides estimates of the errors associated with using isolation amplifier devices in a current sensing configuration.
Supported products & hardware
Products
Isolated amplifiers
Simulation tool
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs
TIDM-02014 — High-power, high-performance automotive SiC traction inverter reference design
TIDM-02014 is a 800-V, 300kW SiC-based traction inverter system reference design developed by Texas Instruments and Wolfspeed provides a foundation for OEMs and design engineers to create high-performance, high-efficiency traction inverter systems and get to market faster. This solution (...)
Design guide: PDF
Reference designs
PMP22650 — GaN-based, 6.6-kW, bidirectional, onboard charger reference design
The PMP22650 reference design is a 6.6-kW, bidirectional, onboard charger. The design employs a two-phase totem pole PFC and a full-bridge CLLLC converter with synchronous rectification. The CLLLC utilizes both frequency and phase modulation to regulate the output across the required regulation (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SO-MOD (DWE) | 16 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.