Home
Design & development

LMK04828BEVM

LMK04828 evaluation module

Order now

LMK04828BEVM

Order now

Overview

The LMK04828BEVM and LMK04826BEVM evaluation modules (EVMs) support the LMK0482x family of devices. The the LMK0482x devices are the industry's highest performance clock conditioners with JEDEC JESD204B support. The dual-loop architecture of the PLLATINUM™ integrated circuits enables sub-100 fs jitter (12 kHz to 20 MHz) using a low-noise VCXO module. The dual-loop architecture consists of two high-performance phase-locked loops (PLL), a low-noise crystal oscillator circuit, and a high-performance voltage controlled oscillator (VCO).

The first PLL (PLL1) provides a low-noise jitter cleaner function. The second PLL (PLL2) performs the clock and SYSREF generation. PLL1 can be configured to either work with an external VCXO module or the integrated crystal oscillator with an external tunable crystal and varactor diode. When used with a very narrow loop bandwidth, PLL1 uses the superior close-in phase noise (offsets below 50 kHz) of the VCXO module or the tunable crystal to clean the input clock. The output of PLL1 is used as the clean input reference to PLL2 where it locks the integrated VCO.

The loop bandwidth of PLL2 can be optimized to clean the far-out phase noise (offsets above 50 kHz) where the integrated VCO outperforms the VCXO module or tunable crystal used in PLL1.

Features
  • JEDEC JESD204B support
  • Ultra-low rms jitter performance
  • Dual-loop architecture
  • 3 redundant input clocks with LOS
  • Precision digital delay, fixed or dynamically adjustable
Clock jitter cleaners
LMK04828 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 2370 to 2630-MHz VCO0.
Download View video with transcript Video

Get started

  1. Order the LMK04828BEVM
  2. Download and install TICSPRO-SW and PLLATINUMSIM-SW
  3. Read the LMK04828BEVM user's guide
  4. Configure registers on TICSPRO-SW and simulate performance on PLLATINUMSIM-SW

Order & start development

Evaluation board

LMK04828BEVM — LMK04828 evaluation module

Log in to order
lock Log in to view inventory
In stock / Out of stock
Limit:
Not available on TI.com
Support software

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

Supported products & hardware
Download options

TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices

close
Latest version
Version: 1.7.7.6
Release date: 29 Oct 2024
open-in-new View all versions
lock TICSPro_1.7.7.6_29-Oct-2024.exe  — 142030 K

TICS Pro 1.7.7.6 installer binary for Windows operating system

Checksum
lock = Requires export approval (1 minute)
Products
Clock generators
CDCE6214-Q1 — Ultra-low power clock generator supporting PCIe gen 1-5 with 2 inputs, 4 outputs and internal EEPROM CDCI6214 — PCIe Gen4 support ultra-low power clock generator with four programmable outputs & EEPROM LMK02000 — 1 to 800-MHz, precision clock distributor with integrated PLL and 3 LVDS / 5 LVPECL outputs LMK02002 — 1 to 800-MHz, precision clock distributor with integrated PLL and 4 LVPECL outputs LMK03200 — Precision 0-delay clock conditioner with integrated VCO LMK03318 — Ultra-low jitter clock generator family with single PLL LMK03328 — Ultra-low jitter clock generator family with two independent PLLs LMK03806 — Ultra-low jitter clock generator with 14 outputs LMK3H0102 — Bulk acoustic wave (BAW)-based PCIe Gen 1 to Gen 6-compliant referenceless clock generator
RF PLLs & synthesizers
LMX1204 — 12.8-GHz RF buffer, multiplier and divider with JESD204B/C SYSREF support and phase synchronization LMX1214 — 1:5 18GHz RF buffer and divider with auxiliary clock LMX1860-SEP — Rad tolerant 15GHz RF buffer, multiplier, divider with SYSREF (JESD204B/C support) and FPGA clock LMX1906-SP — Radiation-hardness-assured (RHA) 15GHz buffer, multiplier and divider with SYSREF and FPGA clock LMX2485 — 500-MHz to 3-GHz delta-sigma low power dual PLL for RF personal communications LMX2485E — 50-MHz to 3-GHz delta-sigma low power dual PLL for RF personal communications LMX2485Q-Q1 — 500MHz to 3GHz automotive delta-sigma low power dual PLL LMX2486 — 1-GHz to 4.5-GHz delta-sigma low power dual PLL for RF personal communications LMX2487 — 1 to 6-GHz delta-sigma low power dual PLLatinum frequency synthesizer with 3.0-GHz integer PLL LMX2487E — 3-GHz to 7.5-GHz delta-sigma low power dual PLL for RF personal communications LMX2491 — 6.4-GHz low noise fractional-N PLL with ramp/chirp generation LMX2492 — 500MHz to 14GHz wideband, low noise fractional-N PLL with ramp/chirp generation LMX2492-Q1 — Automotive grade 500-MHz to 14-GHz wideband, low noise fractional-N PLL with ramp/chirp generation LMX2531 — High performance frequency synthesizer system with integrated VCO LMX2541 — Ultra-low noise PLLatinum frequency synthesizer with integrated VCO LMX2571 — 1.34-GHz, low-power, extreme-temperature RF synthesizer with frequency-shift keying (FSK) modulation LMX2571-EP — Enhanced-product, 1.34-GHz, low-power, extreme-temperature RF synthesizer with FSK modulation LMX2572 — 6.4-GHz low-power wideband RF synthesizer LMX2572LP — 2-GHz low power wideband RF synthesizer with FSK modulation LMX2581 — 3.76-GHz wideband frequency synthesizer with integrated VCO LMX2581E — 3.8-GHz wideband frequency synthesizer with integrated VCO LMX2582 — 5.5-GHz high performance, wideband PLLatinum RF synthesizer LMX2592 — 9.8-GHz wideband frequency synthesizer with integrated VCO LMX2594 — 15-GHz wideband PLLatinum™ RF synthesizer with phase synchronization and JESD204B support LMX2595 — 20-GHz wideband RF synthesizer with phase synchronization & JESD204B support LMX2820 — 22.6-GHz wideband RF synthesizer with phase synchronization, JESD and <5-µs frequency calibration
Clock buffers
CDCDB2000 — DB2000QL compliant 20-output clock buffer for PCIe® Gen 1 to Gen 5 CDCDB800 — 8-output clock buffer for PCIe® Gen 1 to Gen 6 LMK01000 — 1.6-GHz high performance clock buffer, divider, and distributor with 3 LVDS & 5 LVPECL outputs LMK01010 — 1.6-GHz high performance clock buffer, divider, and distributor with 8 LVDS outputs LMK01020 — 1.6-GHz high performance clock buffer, divider, and distributor with 8 LVPECL outputs LMK01801 — Dual clock distribution LMK1D1208I — 8-channel output, 1.8-V, 2.5-V, and 3.3-V LVDS buffer with I²C LMKDB1108 — 8-output LP-HCSL clock buffer for PCIe Gen 1 to Gen 6 LMKDB1120 — DB2000QL-compliant 20-output clock buffer for PCIe Gen 1 to Gen 6 LMKDB1204 — 2-input 4-output LP-HCSL clock MUX for PCIe Gen 1 to Gen 6 LMKDB1104 — 4-output LP-HCSL clock buffer for PCIe Gen 1 to Gen 6
Oscillators
LMK61E0M — LVCMOS ultra-low jitter programmable oscillator with internal EEPROM LMK61E2 — 156.250-MHz, ±50 ppm, ultra-low jitter, integrated EEPROM, fully programmable oscillator
Clock jitter cleaners
LMK04100 — Precision clock conditioners clock jitter cleaner with cascaded PLLs LMK04101 — Jitter cleaner with integrated 1430 to 1570-MHz VCO:3 outputs for 2VPEC/LVPEC+4 outputs for LVCOMS LMK04102 — Jitter cleaner with integrated 1600 to 1750-MHz VCO:3 outputs for 2VPEC/LVPEC+4 outputs for LVCOMS LMK04110 — Jitter cleaner with integrated 1185 to 1296-MHz VCO:5 outputs for 2VPEC/LVPEC LMK04111 — Jitter cleaner with integrated 1430 to 1570-MHz VCO:5 outputs for 2VPEC/LVPEC LMK04131 — Jitter cleaner with integrated 1430 to 1570-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS LMK04133 — Jitter cleaner with integrated 1840 to 2160-MHz VCO:2 outputs for 2VPEC/LVPEC+LVDS+LVCOMS LMK04208 — Ultra low-noise clock jitter cleaner with 6 programmable outputs LMK04228 — Ultra low-noise clock jitter cleaner with dual loop PLLs LMK04368-EP — Enhanced product ultra-low-noise 3.2-GHz JESD204C jitter cleaner LMK04610 — Ultra low-noise and low power JESD204B compliant clock jitter cleaner with dual PLLs LMK04616 — Ultra low-noise and low power JESD204B compliant clock jitter cleaner LMK04714-Q1 — Automotive, ultra low-noise 3.2-GHz, JESD204B and JESD204C dual-loop clock jitter cleaner LMK04803 — Low-noise clock jitter cleaner with dual cascaded PLLs and integrated 1.9-GHz VCO LMK04816 — Three input low-noise clock jitter cleaner with dual loop PLLs LMK04821 — Ultra low jitter synthesizer and jitter cleaner with JESD204B support LMK04826 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 1840 to1970-MHz VCO0 LMK04828 — Ultra low-noise JESD204B compliant clock jitter cleaner with integrated 2370 to 2630-MHz VCO0. LMK04828-EP — Ultra low-noise JESD204B compliant clock jitter cleaner with temperature range -55 to 105c LMK04832 — Ultra-low-noise, 3.2-GHz, 15-output, JESD204B clock jitter cleaner with dual loop LMK04832-SEP — Radiation-tolerant, 30-krad, ultra-low-noise, 3.2-GHz 15-output JESD204C clock jitter cleaner LMK04832-SP — Radiation-hardened-assured (RHA), ultra-low-noise, 3.2-GHz, 15-output clock jitter cleaner
Clock network synchronizers
LMK05028 — Low-jitter dual-channel network synchronizer clock LMK05318 — Ultra-low jitter single channel network synchronizer clock with BAW LMK05318B — Ultra-low jitter single channel network synchronizer clock with BAW LMK5B12204 — Ultra-low jitter clock generator with network synchronization and BAW technology LMK5B33216 — 16-output, three DPLL and APLL, network synchronizer with integrated 2.5-GHz bulk-acoustic-wave VCO LMK5B33414 — 14-output, three DPLL and APLL, network synchronizer with integrated 2.5-GHz bulk-acoustic-wave VCO LMK5C33216 — Ultra-low jitter clock synchronizer with JESD204B for wireless communications with BAW LMK5C33216A — Three DPLL, three APLL, two-input and 16-output network synchronizer with JESD204B/C and BAW VCO
Hardware development
Evaluation board
LMK03806BEVAL — LMK03806B Evaluation Board LMK04208EVM — Two Input, 6+1 Output, Clock Jitter Cleaner With Dual Cascaded PLLs and Integrated 2.9 GHz VCO LMK04616EVM — LMK04616 Evaluation Module LMK04805BEVAL — Clock Jitter Cleaner With Dual Cascaded PLLs and Integrated 2.2 GHz VCO LMK04806BEVAL — Clock Jitter Cleaner With Dual Cascaded PLLs and Integrated 2.5 GHz VCO LMK04816BEVAL — Three Input, Thirteen Output, Clock Jitter Cleaner with Dual Cascaded PLLs and Integrated 2.5 GHz VC LMK04826BEVM — LMK04826BEVM Evaluation Module LMK04828BEVM — LMK04828 evaluation module LMK04832EVM — LMK04832 JESD204B Clock Jitter Cleaner/Clock Generator/Distribution Evaluation Module LMK04832SEPEVM — LMK04832-SEP evaluation module for ultra-low-noise, 3.2-GHz 15-output clock jitter clea LMK04906BEVAL — Three Input, Seven Output, Clock Jitter Cleaner with Dual Cascaded PLLs and Integrated 2.5 GHz VCO LMK5B33216EVM — LMK5B33216 evaluation module for 16-output, three DPLL and APLL, network synchronizer with BAW VCO LMX2571EPEVM — LMX2571-EP evaluation module for 1.34-GHz, low-power, extreme-temperature RF synthesizer LMX2582EVM — LMX2582EVM High Performance, Wideband Frequency PLLatinum RF Synthesizer With Integrated VCO LMX2592EVM — LMX2592EVM high-performance, wideband frequency RF synthesizer PLLATINUM™ integrated circuit LMX2594PSEVM — LMX2594 evaluation module for 15-GHz RF synthesizer with multiple-device phase synchronization XMICR-3P-LMX2492 — LMX2492 X-MWblock evaluation modules XMICR-3P-LMX2572 — LMX2572 X-MWblock evaluation modules XMICR-3P-LMX2592 — LMX2592 X-MWblock evaluation modules XMICR-3P-LMX2594 — LMX2594 X-MWblock evaluation modules XMICR-3P-LMX2595 — LMX2595 X-MWblock evaluation modules LMK04832EVM-CVAL — LMK04832-SP evaluation module for ultra-low-noise, dual-loop, JESD204B clock jitter cleaner LMK04368EPEVM — LMK04368-EP evaluation module for JESD204B/C dual-loop clock jitter cleaner LMK61E0MEVM — LMK61E0M Ultra-Low-Jitter Programmabler Oscillator Evaluation Module LMK61E2EVM — LMK61E2EVM Ultra-Low-Jitter Programmable Oscillator Evaluation Module LMX1204EVM — LMX1204 evaluation module for RF buffer, multiplier and divider with JESD204B/C SYSREF support LMX2594EVM — LMX2594EVM 15-GHz wideband RF synthesizer with phase synchronization & JESD204B evaluation module LMX2595EVM — 20-GHz Wideband RF Synthesizer With Phase Synchronization and JESD204B Evaluation Module LMX2615EVM-CVAL — Space grade synthesizer evaluation module LMX2694EPEVM — 15-GHz wideband RF synthesizer evaluation module LMX2572EVM — 6.4-GHz Low Power Wideband RF Synthesizer with Phase Synchronization and JESD204B Support LMX2572LPEVM — 2-GHz Low Power Wideband RF Synthesizer with FSK Modulation Evaluation Module LMX2581EVM — LMX2581 evaluation module LMX2820EVM — LMX2820 22.6-GHz wideband RF synthesizer evaluation module LMX8410LEVM — I/Q demodulator evaluation module LMK5B12212EVM — LMK5B12212 evaluation module LMK5B33414EVM — LMK5B33414 evaluation module for 14-output, three DPLL and APLL, network synchronizer with BAW VCO LMK5C33216AEVM — LMK5C33216A evaluation module LMK5C33216EVM — LMK5C33216 clock synchronizer DPLL 2 input 16 outputs evaluation module LMK5C33414AEVM — LMK5C33414A evaluation module LMK05028EVM — LMK05028 Network Clock Generator and Synchronizer Evaluation Module LMK05318BEVM — Network synchronizer clock evaluation module CDCI6214EVM — CDCI6214 Ultra-Low Power Clock Generator Evaluation Module CDCE6214-Q1EVM — 4 differential and 1 LVCMOS outputs clock generator evaluation module LMK3H0102EVM — LMK3H0102 evaluation module

Documentation

open-in-new TICS_Pro_Release_Notes.pdf

TICS Pro 1.7.7.6 Release Notes

open-in-new TICS_Pro_Manifest.htm

TICS Pro 1.7.7.6 Software Manifest

Release Infomation

Added Features

LMK5Bxxyyy, LMK5Cxxyyy

  • Warnings and errors improved, particularly corrective suggestions
  • REFx_FREQ=0 automatically disables DPLL reference input selection for that input
  • Input validation enabled and disabled by start page settings, including 1PPS
  • APLL reference selection moved to Step 5, just before clock output definition
  • Quick-set multiple outputs to the same settings on frequency planner
  • BAW VCO allows some ppm deviation
  • Force SYSREF option on OUT0/1
  • Expose DPLLx_LCK_TIMER field
  • Match LMK05318B EEPROM page design
  • .EPR export option
  • EEPROM SRAM programming generation support
  • For complete changelist, see release notes

LMK3H0102

  • Configuration search tool
  • Wizard: voltage selection option

Bug Fixes

  • LMK04832-SP, LMK04832-SEP, LMK04714-Q1, LMK04368-EP - PD_FIN0 corrected to FIN0_PD
  • LMK3H0102 - Several wizard bugfixes

Known Issues

  • LMK5C33216 - When cascading from VCO3 to DPLL input, the divide value must manually be entered into DPLLx_REF5_RDIV as ( VCO3 output frequency / DPLLx TDC frequency )
  • LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
  • Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
  • User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* User guide LMK04826/28 User’s Guide (Rev. B) 13 Mar 2018
Certificate LMK04828BEVM EU Declaration of Conformity (DoC) 02 Jan 2019
Data sheet LMK0482x Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs datasheet (Rev. AS) PDF | HTML 27 Sep 2017

Related design resources

Software development

APPLICATION SOFTWARE & FRAMEWORK
TICSPRO-SW — Texas Instruments Clocks and Synthesizers (TICS) Pro Software

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos