Home Interface USB ICs USB hubs & controllers

TUSB1210

ACTIVE

High-speed 480-Mbps USB 2.0 OTG transceiver

Product details

Function USB2 USB speed (Mbps) 480 Type Transceiver Supply voltage (V) 1.1, 3.3 Rating Catalog Operating temperature range (°C) -40 to 85
Function USB2 USB speed (Mbps) 480 Type Transceiver Supply voltage (V) 1.1, 3.3 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RHB) 32 25 mm² 5 x 5
  • USB2.0 PHY transceiver chip, designed to interface with a USB controller through a ULPI interface, fully compliant with:
    • Universal serial bus specification Rev. 2.0
    • On-the-go supplement to the USB 2.0 specification Rev. 1.3
    • UTMI+ low pin interface (ULPI) specification Rev. 1.1
    • ULPI 12-pin SDR interface
  • DP/DM line external component compensation (patent #US7965100 B1)
  • Interfaces to host, peripheral and OTG device cores; optimized for portable devices or system ASICs with built-in USB OTG device core
  • Complete USB OTG physical front-end that supports host negotiation protocol (HNP) and session request protocol (SRP)
  • VBUS overvoltage protection circuitry protects VBUS pin in range –2 V to 20 V
  • Internal 5-V short-circuit protection of DP, DM, and ID pins for cable shorting to VBUS pin
  • ULPI interface:
    • I/O interface (1.8 V) optimized for nonterminated 50 Ω line impedance
    • ULPI CLOCK pin (60 MHz) supports input and output clock configurations
    • Fully programmable ULPI-compliant register set
  • Full industrial grade operating temperature range from –40°C to 85°C
  • Available in a 32-pin quad flat no lead [QFN (RHB)] package
  • USB2.0 PHY transceiver chip, designed to interface with a USB controller through a ULPI interface, fully compliant with:
    • Universal serial bus specification Rev. 2.0
    • On-the-go supplement to the USB 2.0 specification Rev. 1.3
    • UTMI+ low pin interface (ULPI) specification Rev. 1.1
    • ULPI 12-pin SDR interface
  • DP/DM line external component compensation (patent #US7965100 B1)
  • Interfaces to host, peripheral and OTG device cores; optimized for portable devices or system ASICs with built-in USB OTG device core
  • Complete USB OTG physical front-end that supports host negotiation protocol (HNP) and session request protocol (SRP)
  • VBUS overvoltage protection circuitry protects VBUS pin in range –2 V to 20 V
  • Internal 5-V short-circuit protection of DP, DM, and ID pins for cable shorting to VBUS pin
  • ULPI interface:
    • I/O interface (1.8 V) optimized for nonterminated 50 Ω line impedance
    • ULPI CLOCK pin (60 MHz) supports input and output clock configurations
    • Fully programmable ULPI-compliant register set
  • Full industrial grade operating temperature range from –40°C to 85°C
  • Available in a 32-pin quad flat no lead [QFN (RHB)] package

The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections and thereby improve eye diagrams.

The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections and thereby improve eye diagrams.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TUSB1210-Q1 ACTIVE Automotive USB2.0 high-speed 480-Mbps ULPI PHY transceiver Automotive-qualified version of the TUSB1210

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet TUSB1210 Stand-Alone USB Transceiver Chip Silicon datasheet (Rev. J) PDF | HTML 22 Jul 2021
* Errata TUSB1210 Errata 20 Jan 2011
White paper A Primer on USB Type-C and Power Delivery Applications and Requirements (Rev. B) PDF | HTML 25 Mar 2022
EVM User's guide TUSB1210 EVM User's Guide 17 Sep 2014
Application note TUSB121x USB2.0 Board Guidelines 13 Oct 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TUSB1210EVM — TUSB1210 DP/DM Line External Component Compensation, Vbus Overvoltage Protection Circuit EVM

The TUSB1210EVM implements a USB PHY with a ULPI interface. It can support Host, Device, OTG modes and also have output voltage support at the ULPI interface for +1.8V. This EVM also acts as a hardware reference design for any implementation of the TUSB1210.
User guide: PDF
Not available on TI.com
Simulation model

TUSB1210 IBIS Model

SLLM184.ZIP (147 KB) - IBIS Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Package Pins CAD symbols, footprints & 3D models
VQFN (RHB) 32 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos