Home Power management AC/DC & DC/DC converters (integrated FET)
Home
Power management
AC/DC & DC/DC converters (integrated FET)
NEW

TPS7H4011-SP

ACTIVE

Radiation-hardened, QMLV, 4.5V to 14V input 12A synchronous step-down converter

Order now
Data sheet

TPS7H4011-SP

ACTIVE
Data sheet Order now

Product details

Rating Catalog, Space Operating temperature range (°C) -55 to 125 Type Converter Iout (max) (A) 12 Vin (min) (V) 4.5 Vin (max) (V) 14 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Differential Remote Sense, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Programmable current limit, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 11.5 Duty cycle (max) (%) 100
Rating Catalog, Space Operating temperature range (°C) -55 to 125 Type Converter Iout (max) (A) 12 Vin (min) (V) 4.5 Vin (max) (V) 14 Switching frequency (min) (kHz) 100 Switching frequency (max) (kHz) 1000 Features Differential Remote Sense, Enable, Frequency synchronization, Over Current Protection, Power good, Pre-Bias Start-Up, Programmable current limit, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO adjustable Control mode current mode Vout (min) (V) 0.6 Vout (max) (V) 11.5 Duty cycle (max) (%) 100
CFP (HLB) 30 151.23232 mm² 19.28 x 7.844
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 4.5V to 14V
  • 12A maximum output current
  • High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
    • 94% at 1A
    • 86% at 9A
    • 82% at 12A
  • Integrated 45mΩ (HS) and 33mΩ (LS) MOSFETs (typ at 12V)
  • Flexible switching frequency options:
    • 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
    • 100kHz to 1MHz external sync capability
    • SYNC pins can be configured 90° out of phase to parallel up to 4 devices
  • 0.6V ± 0.67% voltage reference over line, temperature, and radiation
  • Differential remote sensing
  • Selectable current limit
  • FAULT input pin for flexible fault management
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Supports inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range
  • Total ionizing dose (TID) characterized
    • Radiation hardness assurance (RHA) availability of up to 100krad(Si)
  • Single-Event Effects (SEE) characterized
    • Single-event latchup (SEL), single-event burnout (SEB), and single-event gate rupture (SEGR) immune up to linear energy transfer (LET) = 75MeV-cm2/mg
    • Single-event functional interrupt (SEFI) and single-event transient (SET) characterized up to LET = 75MeV-cm2/mg
  • Input voltage range from 4.5V to 14V
  • 12A maximum output current
  • High efficiency (typical values for VIN = 12V, VOUT = 3.3V, fSW = 500kHz)
    • 94% at 1A
    • 86% at 9A
    • 82% at 12A
  • Integrated 45mΩ (HS) and 33mΩ (LS) MOSFETs (typ at 12V)
  • Flexible switching frequency options:
    • 100kHz to 1MHz, accurate (±15% or better), adjustable internal oscillator
    • 100kHz to 1MHz external sync capability
    • SYNC pins can be configured 90° out of phase to parallel up to 4 devices
  • 0.6V ± 0.67% voltage reference over line, temperature, and radiation
  • Differential remote sensing
  • Selectable current limit
  • FAULT input pin for flexible fault management
  • Monotonic start-up into prebiased outputs
  • Adjustable slope compensation and soft-start
  • Adjustable input enable and power-good output for power sequencing
  • Power-good output monitor for undervoltage and overvoltage
  • Supports inverting buck-boost topology
  • Plastic packages outgas tested per ASTM E595
  • Available in military (–55°C to 125°C) temperature range

The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.

The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.

The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.

The TPS7H4011 is a 14V, 12A synchronous buck converter optimized for use in a space environment. The peak current mode converter obtains high efficiency with good transient performance and reduced component count.

The wide voltage range of the TPS7H4011 enables it to be used as a point of load regulator to convert directly from a 12V or 5V rail. The output voltage start-up ramp is controlled by the SS_TR pin. Power sequencing is possible with the EN and PWRGD pins.

The device can be configured with up-to four devices in parallel without an external clock for increased current capabilities. Additionally, various features are included such as differential remote sensing, selectable current limit, a flexible fault input pin, and configurable compensation.

filter Find other AC/DC & DC/DC converters (integrated FET)
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 14
Type Title Date
* Data sheet TPS7H4011-SP and TPS7H4011-SEP 4.5V to 14V Input 12A Radiation Hardened Synchronous Buck Converter datasheet (Rev. A) PDF | HTML 16 Aug 2024
* Radiation & reliability report TPS7H4011-SP Neutron Displacement Damage (NDD) Characterization Report PDF | HTML 22 Aug 2024
* Radiation & reliability report TPS7H4011-SP Single-Event Effects (SEE) PDF | HTML 24 Jul 2024
* Radiation & reliability report TPS7H4011-SP Total Ionizing Dose (TID) Radiation Report PDF | HTML 24 Apr 2024
Application brief DLA Approved Optimizations for QML Products (Rev. B) PDF | HTML 17 May 2024
EVM User's guide TPS7H4011-SP (TPS7H4011EVM-CVAL) Evaluation Module User's Guide PDF | HTML 12 Apr 2024
Certificate TPS7H4011EVM-CVAL EU Declaration of Conformity (DoC) 21 Feb 2024
Selection guide TI Space Products (Rev. J) 12 Feb 2024
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. A) 31 Aug 2023
Application note QML flow, its importance, and obtaining lot information (Rev. C) 30 Aug 2023
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 17 Nov 2022
Application note DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21 Aug 2020
Application note Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form PDF | HTML 18 May 2020
E-book Radiation Handbook for Electronics (Rev. A) 21 May 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS7H4011EVM-CVAL — TPS7H4011-SP evaluation module

The TPS7H4011EVM-CVAL demonstrates the operation of a single TPS7H4011-SP buck converter. The board provides footprints that can be populated with additional components to allow for testing of customized configurations, as well as jumpers and test points for easy device configuration, and (...)

User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS7H4011 PSpice Transient Model

SNVMCE1.ZIP (61 KB) - PSpice Model
Download
Simulation model

TPS7H4011 SIMPLIS Model

SNVMCD9.ZIP (25 KB) - SIMPLIS Model
Download
Calculation tool

TPS7H4011-CALC — TPS7H4011 component calculator

TPS7H4011 component calculator
Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC converters (integrated FET)
TPS7H4011-SP — Radiation-hardened, QMLV, 4.5V to 14V input 12A synchronous step-down converter
Download
Package Pins CAD symbols, footprints & 3D models
CFP (HLB) 30 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos