TPS552882-Q1

ACTIVE

36-V, 16-A buck-boost converter, AEC-Q100 qualified

TPS552882-Q1

ACTIVE

Product details

Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Controller, Converter Vin (min) (V) 2.7 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, Light Load Efficiency, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 21.26 Iq (typ) (µA) 1500 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 16
Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck-Boost Type Controller, Converter Vin (min) (V) 2.7 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, Light Load Efficiency, Output discharge, Power good, Spread Spectrum, Synchronous Rectification, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 21.26 Iq (typ) (µA) 1500 Duty cycle (max) (%) 100 Switch current limit (typ) (A) 16
VQFN-HR (RPM) 26 14 mm² 4 x 3.5
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Wide input and output voltage range
    • Wide input voltage range: 2.7 V to 36 V
    • Wide output voltage range: 0.8 V to 22 V
  • High efficiency over entire load range
    • 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Programmable average inductor current limit up to 16 A
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
  • Adjustable output voltage compensation for voltage droop over the cable
  • Programmable PFM and FPWM mode at light load
  • Programmable output current limit by sensing resistor
  • ±1% reference voltage accuracy
  • Fixed 4-ms soft-start time
  • Create a custom design using the TPS552882-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Wide input and output voltage range
    • Wide input voltage range: 2.7 V to 36 V
    • Wide output voltage range: 0.8 V to 22 V
  • High efficiency over entire load range
    • 97% efficiency at VIN = 12 V, VOUT = 20 V and IOUT = 3 A
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • Programmable average inductor current limit up to 16 A
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 4.0-mm × 3.5-mm HotRod™ QFN package with wettable flank option
  • Adjustable output voltage compensation for voltage droop over the cable
  • Programmable PFM and FPWM mode at light load
  • Programmable output current limit by sensing resistor
  • ±1% reference voltage accuracy
  • Fixed 4-ms soft-start time
  • Create a custom design using the TPS552882-Q1 with the WEBENCH Power Designer

The TPS552882-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS552882-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.

The TPS552882-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. The TPS552882-Q1 uses external resistor divider to set the output voltage with 1.2-V intenral reference voltage. The TPS552882-Q1 is capable of delivering 100 W from 12-V input voltage.

The TPS552882-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS552882-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS552882-Q1 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS552882-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS552882-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.

The TPS552882-Q1 is a synchronous four-switch buck-boost converter capable of regulating the output voltage at, above, or below the input voltage. The TPS552882-Q1 operates over 2.7-V to 36-V wide input voltage and is capable of outputing 0.8-V to 22-V voltage to support a variety of applications.

The TPS552882-Q1 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency. The TPS552882-Q1 uses external resistor divider to set the output voltage with 1.2-V intenral reference voltage. The TPS552882-Q1 is capable of delivering 100 W from 12-V input voltage.

The TPS552882-Q1 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS552882-Q1 also provides optional spread spectrum to minimize peak EMI.

The TPS552882-Q1 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS552882-Q1 also ensures safe operating with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS552882-Q1 can use a small inductor and small capacitors with high switching frequency. It is available in a 4.0-mm × 3.5-mm QFN package.

Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
LM5176-Q1 ACTIVE 55-V wide VIN synchronous 4-switch buck-boost controller, AEC-Q100 qualified Use LM5176-Q1 controller for higher power
TPS552872-Q1 ACTIVE Automotive, 36-V, 4-A fully integrated buck-boost converter 36-V, 4-A full integrated buck-boost converter, AEC-Q100 qualified

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet TPS552882-Q1 36-V, 16-A Buck-boost Converter datasheet (Rev. A) PDF | HTML 02 Dec 2021
Application note TPS55288 벅-부스트 컨버터를 사용하여 낮은 EMI를 달성하는 방법 PDF | HTML 28 Oct 2022
Functional safety information TPS55288x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 10 Aug 2022
Application note Measuring and Understanding the Output Voltage Ripple of a Boost Converter PDF | HTML 22 Feb 2021
Application note TPS55288 Layout Guideline (Rev. B) PDF | HTML 20 Dec 2020
Application note How to Achieve Low EMI with TPS55288 Buck-Boost Converter PDF | HTML 02 Sep 2020
Application brief USB Type C Power Delivery Source with TPS65987 and TPS55288 PDF | HTML 06 Mar 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS552882EVM-2MHZ — TPS552882 36V, 16A buck-boost converter non-I2C evaluation module

The TPS552882 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS552882 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application. The TPS552882 (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

TPS552882EVM-400KHZ — TPS552882 400 kHz operating frequency, non-I2C buck-boost converter evaluation module

The TPS552882 is a synchronous buck-boost converter optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS552882 integrates two 16-A MOSFETs of the boost leg to balance the solution size and efficiency for USB Power Delivery (USB PD) application. The TPS552882 (...)
User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS55288 encrypted PSpice model

SLVMDD9.ZIP (192 KB) - PSpice Model
Calculation tool

SLVRBF9 TPS55288 Design Calculation V1.0

Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC converters (integrated FET)
TPS55288 36V, 16A buck-boost converter with PPS control TPS55288-Q1 36-V, 16-A buck-boost converter with I2C control, AEC-Q100 qualified TPS552882-Q1 36-V, 16-A buck-boost converter, AEC-Q100 qualified
Package Pins CAD symbols, footprints & 3D models
VQFN-HR (RPM) 26 Ultra Librarian

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos