Home Power management Power switches High-side switches
Home
Power management
Power switches
High-side switches

TPS1H000-Q1

ACTIVE

40-V, 1-Ω, 1-ch automotive smart high-side switch with adjustable current limit

Order now
Data sheet

TPS1H000-Q1

ACTIVE
Data sheet Order now

Product details

Number of channels 1 Operating voltage (max) (V) 40 Operating voltage (min) (V) 4 Ron (typ) (mΩ) 1000 Imax (A) 0.9 Current limit (min) (A) 0.05 Current limit (max) (A) 1 Current limit type Adjustable Current limit accuracy +/- 10% @ 0.15A FET Internal Features Digital output, Programmable current limit Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
Number of channels 1 Operating voltage (max) (V) 40 Operating voltage (min) (V) 4 Ron (typ) (mΩ) 1000 Imax (A) 0.9 Current limit (min) (A) 0.05 Current limit (max) (A) 1 Current limit type Adjustable Current limit accuracy +/- 10% @ 0.15A FET Internal Features Digital output, Programmable current limit Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown Rating Automotive
HVSSOP (DGN) 8 14.7 mm² 3 x 4.9
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4B
  • Single-Channel 1000-mΩ Smart High-Side Switch
  • Wide Operating Voltage: 3.4 V to 40 V
  • Low Standby Current: <500 nA
  • Adjustable Current Limit With External Resistor
    • ±15% When ≥150 mA
    • ±10% When ≥300 mA
  • Configurable Behavior After Current Limit
    • Holding Mode
    • Latch-Off Mode With Adjustable Delay Time
    • Auto-Retry Mode
  • Supports Standalone Operation Without an MCU
  • Protection:
    • Short-to-GND and Overload
    • Thermal Shutdown and Thermal Swing
    • Negative Voltage Clamp for Inductive Loads
    • Loss-of-GND and Loss-of-Battery
  • Diagnostics:
    • Overload and Short-to-GND Detection
    • Open-Load and Short-to-Battery Detection in ON or OFF State
    • Thermal Shutdown and Thermal Swing
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C4B
  • Single-Channel 1000-mΩ Smart High-Side Switch
  • Wide Operating Voltage: 3.4 V to 40 V
  • Low Standby Current: <500 nA
  • Adjustable Current Limit With External Resistor
    • ±15% When ≥150 mA
    • ±10% When ≥300 mA
  • Configurable Behavior After Current Limit
    • Holding Mode
    • Latch-Off Mode With Adjustable Delay Time
    • Auto-Retry Mode
  • Supports Standalone Operation Without an MCU
  • Protection:
    • Short-to-GND and Overload
    • Thermal Shutdown and Thermal Swing
    • Negative Voltage Clamp for Inductive Loads
    • Loss-of-GND and Loss-of-Battery
  • Diagnostics:
    • Overload and Short-to-GND Detection
    • Open-Load and Short-to-Battery Detection in ON or OFF State
    • Thermal Shutdown and Thermal Swing

The TPS1H000-Q1 device is a fully protected single-channel high-side power switch with an integrated 1000-mΩ NMOS power FET.

An adjustable current limit improves system reliability by limiting the inrush or overload current. The high accuracy of the current limit improves overload protection, simplifying the front-stage power design. Configurable features besides current limit provide design flexibility in the areas of functionality, cost, and thermal dissipation.

The device supports full diagnostics with the digital status output. Open-load detection is available in both the ON- and OFF-states. The device supports operation with or without an MCU. Standalone mode allows use of the device in isolated systems.

The TPS1H000-Q1 device is a fully protected single-channel high-side power switch with an integrated 1000-mΩ NMOS power FET.

An adjustable current limit improves system reliability by limiting the inrush or overload current. The high accuracy of the current limit improves overload protection, simplifying the front-stage power design. Configurable features besides current limit provide design flexibility in the areas of functionality, cost, and thermal dissipation.

The device supports full diagnostics with the digital status output. Open-load detection is available in both the ON- and OFF-states. The device supports operation with or without an MCU. Standalone mode allows use of the device in isolated systems.

filter Find other High-side switches
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
TPS1H200A-Q1 ACTIVE 40-V, 200-mΩ, 1-ch automotive smart high-side switch with adjustable current limit Lower RDSON

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 15
Type Title Date
* Data sheet TPS1H000-Q1 40-V, 1-Ω, Single-Channel Smart High-Side Switch datasheet (Rev. C) PDF | HTML 06 Jun 2019
Application note Reducing Cabling Effort in Camera-Based Driver Monitoring Systems (DMS) PDF | HTML 18 Dec 2023
Functional safety information TPS1H000-Q1 Functional Safety FIT Rate, FMD, and Pin FMA (Rev. A) PDF | HTML 29 Jul 2021
Application note How To Drive Resistive, Inductive, Capacitive, and Lighting Loads (Rev. E) PDF | HTML 09 Mar 2021
Application note Driving PWM Loads with TI High-Side Switches PDF | HTML 02 Mar 2021
Application note Using PSpice Simulator to Model Thermal Behavior in TI’s Smart High-Side Switch PDF | HTML 30 Nov 2020
Application note Designing for Loss of Ground on Texas Instruments High-Side Switches (Rev. A) PDF | HTML 16 Jul 2020
Application note Fault and Normal Diagnostic Considerations for Smart High Side Switches PDF | HTML 10 Jul 2020
E-book 11 Ways to Protect Your Power Path 03 Jul 2019
Application note AEC-Q100-012 Short-Circuit Reliability Test Results for Smart Power Switches (Rev. A) 06 May 2019
Application brief Improved Automotive Short Circuit Reliability With Adjustable Current Limiting (Rev. A) 11 Apr 2019
Application note Adjustable Current Limit of Smart Power Switches (Rev. B) 21 Jan 2019
Application note Reverse battery protection for high side switches 12 Nov 2018
Application note High-Side Switches Paralleling Channels 30 Apr 2018
EVM User's guide TPS1H000-Q1 Evaluation Module (EVM) 19 Jul 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS1H000EVM — TPS1H000-Q1 40V, 1A, 1000mΩ On-Resistance High Side Switch Evaluation Module

The TPS1H000-Q1 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS1H000-Q1 single channel high side switch. The TPS1H000EVM allows the user to apply different input voltages (3.4 V to 40 V) under different loading conditions (0 A to 1 A) to the TPS1H000-Q1 (...)
User guide: PDF
Not available on TI.com
Simulation model

TPS1H000A Unencrypted PSpice Transient Model Package (Rev. B)

SLVMCE7B.ZIP (85 KB) - PSpice Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
HVSSOP (DGN) 8 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos