Home Sensors Magnetic sensors Hall-effect latches & switches
Home
Sensors
Magnetic sensors
Hall-effect latches & switches

TMAG5123-Q1

ACTIVE

Automotive, in-plane, high-precision, high-voltage switch

Order now
Data sheet

TMAG5123-Q1

ACTIVE
Data sheet Order now

Product details

Type Omnipolar switch Supply current (µA) 3500 Bandwidth (kHz) 10 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 38 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain TI functional safety category Functional Safety-Capable
Type Omnipolar switch Supply current (µA) 3500 Bandwidth (kHz) 10 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 38 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain TI functional safety category Functional Safety-Capable
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 0: –40°C To +150°C, TA
  • In-plane, omnipolar Hall-effect switch
  • High magnetic sensitivity:
    • TMAG5123B -Q1: 4.1 mT (typical)
    • TMAG5123C -Q1: 7.5 mT (typical)
    • TMAG5123D -Q1: 10.9 mT (typical)
  • Supports a wide voltage range
    • 2.7-V to 38-V operating VCC range
    • No external regulator required
  • 30kHz continuous conversion
  • Open-drain output
  • SOT-23 package option
  • Protection features
    • Supports up to 40-V load dump
    • Reverse battery protection to –20-V
    • Output short-circuit protection
    • Output current limitation
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 0: –40°C To +150°C, TA
  • In-plane, omnipolar Hall-effect switch
  • High magnetic sensitivity:
    • TMAG5123B -Q1: 4.1 mT (typical)
    • TMAG5123C -Q1: 7.5 mT (typical)
    • TMAG5123D -Q1: 10.9 mT (typical)
  • Supports a wide voltage range
    • 2.7-V to 38-V operating VCC range
    • No external regulator required
  • 30kHz continuous conversion
  • Open-drain output
  • SOT-23 package option
  • Protection features
    • Supports up to 40-V load dump
    • Reverse battery protection to –20-V
    • Output short-circuit protection
    • Output current limitation

The TMAG5123-Q1 is a chopper-stabilized omnipolar, active-low, in-plane, Hall-effect switch sensor. The TMAG5123-Q1 eases mechanical placement of the sensor by measuring magnetic fields parallel to the surface of the printed circuit board (PCB) in a surface mount SOT-23 package.

Different sensitivity levels are available to match the specific requirement of the application. When the applied magnetic flux density value exceeds the operating point (BOP) threshold in absolute magnetic field values, the open-drain output produces a low-state voltage. The output remains low until the applied field decreases to less than the release point (BRP) threshold also in absolute terms.

The TMAG5123-Q1 incorporates a wide 2.7-V to 38-V operating voltage range and reverse polarity protection of up to -20-V, enabling robust operation for industrial and automotive applications.

The TMAG5123-Q1 is a chopper-stabilized omnipolar, active-low, in-plane, Hall-effect switch sensor. The TMAG5123-Q1 eases mechanical placement of the sensor by measuring magnetic fields parallel to the surface of the printed circuit board (PCB) in a surface mount SOT-23 package.

Different sensitivity levels are available to match the specific requirement of the application. When the applied magnetic flux density value exceeds the operating point (BOP) threshold in absolute magnetic field values, the open-drain output produces a low-state voltage. The output remains low until the applied field decreases to less than the release point (BRP) threshold also in absolute terms.

The TMAG5123-Q1 incorporates a wide 2.7-V to 38-V operating voltage range and reverse polarity protection of up to -20-V, enabling robust operation for industrial and automotive applications.
filter Find other Hall-effect latches & switches
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
DRV5023-Q1 ACTIVE Automotive 2.7V to 38V Hall Effect Unipolar Switch Out-of-plane switch with unipolar magnetic sensitivity
TMAG5123 ACTIVE High-voltage (up to 38 V), in-plane, high-precision switch Industrial version
NEW TMAG5131-Q1 ACTIVE Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch Low power consumption, 10 Hz using 1.3 µA, and higher sensitivity options

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet TMAG5123-Q1 Automotive In-Plane, High-Precision, High-Voltage, Hall-Effect Switch datasheet (Rev. A) PDF | HTML 25 Aug 2021
Application brief Introduction to TI Magnetic Sense Simulator Features PDF | HTML 05 Dec 2023
User guide Texas Instruments' Magnetic Sense Simulator User's Guide PDF | HTML 04 Dec 2023
Application brief Sensing Magnetic Fields In-Plane Versus Out-of-Plane (Rev. C) PDF | HTML 31 Aug 2022
Application brief Transition Detection Using Hall-Effect Sensors (Rev. A) PDF | HTML 09 Jun 2022
Functional safety information TMAG5123-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 27 Jan 2022
Application note HMI Rocker Switch With Hall-Effect Switches PDF | HTML 21 Jan 2022
Application brief Multi-State Position Selection Using Hall-Effect Sensors PDF | HTML 13 Jan 2022
EVM User's guide TMAG5123EVM User's Guide PDF | HTML 18 Jun 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TMAG5123EVM — TMAG5123 in-plane high-precision Hall effect switch evaluation module

The TMAG5123 is a family of high-precision, wide Vin, in-plane Hall effect sensors designed for system challenges where higher magnetic precision is needed for more flexibility in design. The TMAG5123 evaluation module is populated with a Sensata 499-P36-20 test socket, which allows for precision (...)

User guide: PDF | HTML
Not available on TI.com
Calculation tool

HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool

HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.

Supported products & hardware

Supported products & hardware

Products
Multi-axis linear & angle position sensors
TMAG5170 — High-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170-Q1 — Automotive, high-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface
Linear Hall-effect sensors
DRV5053 — High voltage (up to 38V), linear hall effect sensor DRV5053-Q1 — Automotive, high voltage (up to 38V), linear hall effect sensor DRV5055 — Ratiometric linear hall effect sensor with analog output DRV5055-Q1 — Automotive, ratiometric linear Hall-effect sensor with analog output DRV5056 — Ratiometric unipolar linear hall effect sensor with analog output DRV5056-Q1 — Automotive, ratiometric unipolar linear hall effect sensor with analog output DRV5057 — Linear hall effect sensor with digital PWM output DRV5057-Q1 — Automotive linear hall effect sensor with digital PWM output
Hall-effect latches & switches
DRV5011 — Small size (available in WCSP and X2SON), low voltage (up to 5.5-V) Hall effect latch DRV5012 — Low power (as low as 3.3-µA), low voltage (up to 5.5-V) Hall effect latch DRV5013 — High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch DRV5013-Q1 — Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch DRV5015 — High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5015-Q1 — Automotive, high sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5021 — Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch DRV5021-Q1 — Automotive 2.5-V to 5.5-V Hall effect unipolar switch DRV5023 — High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch DRV5023-Q1 — Automotive 2.7V to 38V Hall Effect Unipolar Switch DRV5032 — Low-power (5Hz, <1µA) low-voltage (up to 5.5V) switch DRV5033 — High voltage (up to 38V), high bandwidth (up to 30 kHz) omnipolar switch DRV5033-Q1 — Automotive 2.7V to 38V Hall Effect Omnipolar Switch TMAG5110 — High-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5110-Q1 — Automotive, high-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5111 — High-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5111-Q1 — Automotive, high-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5123 — High-voltage (up to 38 V), in-plane, high-precision switch TMAG5123-Q1 — Automotive, in-plane, high-precision, high-voltage switch TMAG5124 — Two-wire (current output), high-voltage (up to 38 V), high-precision switch for remote sensing TMAG5131-Q1 — Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch TMAG5231 — Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Hardware development
Evaluation board
DRV5055-5057EVM — DRV5055, DRV5056 and DRV5057 linear Hall effect sensor evaluation module DRV5055EVM — DRV5055 evaluation module HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module TMAG5170UEVM — TMAG5170 evaluation module
Software
Calculation tool
HALL-PROXIMITY-DESIGN — Magnetic sensing proximity tool
Download
Simulation tool

TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool

The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
Supported products & hardware

Supported products & hardware

Products
Hall-effect latches & switches
DRV5011 — Small size (available in WCSP and X2SON), low voltage (up to 5.5-V) Hall effect latch DRV5012 — Low power (as low as 3.3-µA), low voltage (up to 5.5-V) Hall effect latch DRV5013 — High voltage (up to 38V), high bandwidth (30kHz) Hall-effect latch DRV5013-Q1 — Automotive, high voltage (up to 38V), high bandwidth (30-kHz) Hall effect latch DRV5015 — High sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5015-Q1 — Automotive, high sensitivity (±2-mT), low voltage (up to 5.5-V) Hall effect latch DRV5021 — Low voltage (up to 5.5V), high bandwidth (up to 30 kHz) unipolar switch DRV5021-Q1 — Automotive 2.5-V to 5.5-V Hall effect unipolar switch DRV5023 — High voltage (up to 38V), high bandwidth (up to 30 kHz) unipolar switch DRV5023-Q1 — Automotive 2.7V to 38V Hall Effect Unipolar Switch DRV5032 — Low-power (5Hz, <1µA) low-voltage (up to 5.5V) switch DRV5033 — High voltage (up to 38V), high bandwidth (up to 30 kHz) omnipolar switch DRV5033-Q1 — Automotive 2.7V to 38V Hall Effect Omnipolar Switch TMAG5110 — High-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5110-Q1 — Automotive, high-sensitivity, 2D, dual-channel, Hall-effect latch TMAG5111 — High-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5111-Q1 — Automotive, high-sensitivity, 2D, dual-channel, speed and direction outputs, Hall-effect latch TMAG5115 — High-speed Hall-effect latch with low jitter (fast response) TMAG5123 — High-voltage (up to 38 V), in-plane, high-precision switch TMAG5123-Q1 — Automotive, in-plane, high-precision, high-voltage switch TMAG5124 — Two-wire (current output), high-voltage (up to 38 V), high-precision switch for remote sensing TMAG5124-Q1 — Automotive 2-wire high-voltage (up to 38 V), high-precision switch TMAG5131-Q1 — Automotive low-power (10 Hz, 1 µA) low-voltage (down to 1.65 V) Hall-effect switch TMAG5213 — High-bandwidth (30-kHz), high-voltage (26 V) Hall-effect latch for low-cost applications TMAG5231 — Low-power, low-voltage (1.65 V to 5.5 V) Hall-effect switch TMAG5233 — In-plane (X-axis) Hall-effect switch TMAG5328 — Resistor-adjustable, low-power Hall-effect switch
Linear Hall-effect sensors
DRV5053 — High voltage (up to 38V), linear hall effect sensor DRV5053-Q1 — Automotive, high voltage (up to 38V), linear hall effect sensor DRV5055 — Ratiometric linear hall effect sensor with analog output DRV5055-Q1 — Automotive, ratiometric linear Hall-effect sensor with analog output DRV5056 — Ratiometric unipolar linear hall effect sensor with analog output DRV5056-Q1 — Automotive, ratiometric unipolar linear hall effect sensor with analog output DRV5057 — Linear hall effect sensor with digital PWM output DRV5057-Q1 — Automotive linear hall effect sensor with digital PWM output TMAG5253 — Low-power linear Hall-effect sensor with enable pin in ultrasmall X2SON package
Multi-axis linear & angle position sensors
TMAG3001 — Three-axis linear Hall-effect sensor with I²C and programmable switch in wafer chip-scale package TMAG5170 — High-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170-Q1 — Automotive, high-precision linear 3D Hall-effect sensor with serial peripheral interface TMAG5170D-Q1 — Automotive, high-precision, 3D linear Hall-effect dual-die sensor with SPI interface TMAG5173-Q1 — Automotive, high-precision, linear 3D Hall-effect sensor with I²C interface TMAG5273 — Low-power linear 3D Hall-effect sensor with I²C interface TMAG6180-Q1 — Automotive high-precision analog AMR angle sensor with 360° angle range TMAG6181-Q1 — Automotive high-precision analog AMR angle sensor with integrated turns counter
Hardware development
Evaluation board
DRV5011-5012EVM — DRV5011 and DRV5012 Ultra-Low Power, Digital-Latch Hall Effect Sensor Evaluation Module DRV5032-SOLAR-EVM — DRV5032 Ultra-Low Power, 1.65V to 5.5V Hall Effect Switch Sensor Evaluation Module DRV5055-5057EVM — DRV5055, DRV5056 and DRV5057 linear Hall effect sensor evaluation module DRV5055-ANGLE-EVM — DRV5055 angle evaluation module DRV5055EVM — DRV5055 evaluation module HALL-ADAPTER-EVM — Hall sensor breakout adapter evaluation module HALL-HINGE-EVM — TMAG5231 evaluation module for Hall-effect hinge HALL-HMI-ROCKER-EVM — Evaluation module for human machine interface (HMI) rocker switch using Hall-effect switches HALL-TRIGGER-EVM — Evaluation module for contactless, Hall-effect variable-speed trigger with external field protection LDC-HALL-HMI-EVM — Evaluation module for inductive touch and magnetic dial contactless user-interface design TMAG3001EVM — TMAG3001 evaluation module for three-axis linear Hall-effect sensor with I²C and programmable switch TMAG5110-5111EVM — TMAG511x evaluation module for high-sensitivity, 2D, dual-channel, Hall-effect latches TMAG5115EVM — TMAG5115 evaluation module for high-sensitivity low-jitter high-voltage Hall-effect latches TMAG5123EVM — TMAG5123 in-plane high-precision Hall effect switch evaluation module TMAG5124EVM — TMAG5124 2-wire Hall-effect switch evaluation module TMAG5170DEVM — TMAG5170DEVM evaluation module for high-precision 3D linear Hall-effect dual-die sensor TMAG5170UEVM — TMAG5170 evaluation module TMAG5173EVM — TMAG5173-Q1 evaluation module for automotive, high-precision, linear 3D Hall-effect sensor with I²C TMAG5233EVM — TMAG5233 evaluation module TMAG5253EVM — TMAG5253 evaluation module for low-power linear Hall-effect sensor TMAG5273EVM — TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface TMAG5328EVM — TMAG5328 evaluation module for resistor-adjustable, low-power Hall-effect switch TMAG6180-6181EVM — TMAG6180 and TMAG6181 evaluation module with differential sine and cosine analog outputs
Software
Calculation tool
HALL-PROXIMITY-DESIGN — Magnetic sensing proximity tool
Launch Download
Package Pins CAD symbols, footprints & 3D models
SOT-23 (DBZ) 3 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos