Home Audio Audio amplifiers Speaker amps
Home
Audio
Audio amplifiers
Speaker amps

TAS2781

ACTIVE

25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier

Order now
Data sheet

TAS2781

ACTIVE
Data sheet Order now

Product details

Audio input type Digital Input Architecture Class-D, Smart Amp Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 23 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Output power (W) 25 SNR (dB) 110 THD + N at 1 kHz (%) 0.006 Iq (typ) (mA) 15 Control interface I2C, SPI, Shutdown Mode Closed/open loop Closed Analog supply (min) (V) 1.65 Analog supply voltage (max) (V) 1.95 Sampling rate (max) (kHz) 192 PSRR (dB) 110 Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D, Smart Amp Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 23 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Output power (W) 25 SNR (dB) 110 THD + N at 1 kHz (%) 0.006 Iq (typ) (mA) 15 Control interface I2C, SPI, Shutdown Mode Closed/open loop Closed Analog supply (min) (V) 1.65 Analog supply voltage (max) (V) 1.95 Sampling rate (max) (kHz) 192 PSRR (dB) 110 Operating temperature range (°C) -40 to 85
VQFN-HR (RYY) 30 14 mm² 3.5 x 4
  • Integrated DSP for audio processing
  • 24-V Supply for class-d output stage
  • Y-Bridge multi-level supply architecture
  • Hybrid-pro external boost control algorithm
  • Ultrasonic output support up to 40 kHz
  • 25 W, 1% THD+N (4 Ω, 18 V)
  • 30 W Maximum output power, 10% THD+N
  • 82% at 1W, 4 Ω, PVDDH = 12 V, PVDDL = 3.8 V
  • 83% at 1W, 8 Ω, PVDDH = 18 V, PVDDL = 5 V
  • 84% at 1W, 4 Ω, PVDDH = 18 V, PVDDL = 5 V
  • 90% at 15W, 4 Ω, PVDDH = 18 V, PVDDL = 5 V
  • 93% at 15W , 8 Ω, PVDDH = 18 V, PVDDL = 5 V
  • <0.5 µA in Hardware Shutdown Mode
  • AVDD: 1.8 V
  • IOVDD: 1.8 V/ 3.3 V
  • PVDDL: 2.7 V to 5.5 V
  • PVDDH: 3 V to 24 V
  • SDOUT for echo cancellation
  • I 2S/TDM: 8 channels of 32 bits up to 192 KSPS
  • I 2C with fast mode+ or SPI
  • Inter-chip communication bus
  • 16 kHz to 192 kHz sample rates
  • Real-time IV-sense for speaker protection
  • Dynamic range compressor
  • Brownout protection with power limiter
  • Multi-channel balancing communication
  • Over power and low battery protection
  • PVDDH/ PVDDL supply tracking limiters
  • Thermal and over current protections
  • Thermal foldback
  • Post filter feedback and slew rate control
  • Integrated DSP for audio processing
  • 24-V Supply for class-d output stage
  • Y-Bridge multi-level supply architecture
  • Hybrid-pro external boost control algorithm
  • Ultrasonic output support up to 40 kHz
  • 25 W, 1% THD+N (4 Ω, 18 V)
  • 30 W Maximum output power, 10% THD+N
  • 82% at 1W, 4 Ω, PVDDH = 12 V, PVDDL = 3.8 V
  • 83% at 1W, 8 Ω, PVDDH = 18 V, PVDDL = 5 V
  • 84% at 1W, 4 Ω, PVDDH = 18 V, PVDDL = 5 V
  • 90% at 15W, 4 Ω, PVDDH = 18 V, PVDDL = 5 V
  • 93% at 15W , 8 Ω, PVDDH = 18 V, PVDDL = 5 V
  • <0.5 µA in Hardware Shutdown Mode
  • AVDD: 1.8 V
  • IOVDD: 1.8 V/ 3.3 V
  • PVDDL: 2.7 V to 5.5 V
  • PVDDH: 3 V to 24 V
  • SDOUT for echo cancellation
  • I 2S/TDM: 8 channels of 32 bits up to 192 KSPS
  • I 2C with fast mode+ or SPI
  • Inter-chip communication bus
  • 16 kHz to 192 kHz sample rates
  • Real-time IV-sense for speaker protection
  • Dynamic range compressor
  • Brownout protection with power limiter
  • Multi-channel balancing communication
  • Over power and low battery protection
  • PVDDH/ PVDDL supply tracking limiters
  • Thermal and over current protections
  • Thermal foldback
  • Post filter feedback and slew rate control

The TAS2781 is a mono, digital input Class-D audio amplifier optimized for efficiently driving high peak power into loudspeakers. The Class-D amplifier is capable of delivering 25 W of continuous power into a 4 Ω load with less than 1% THD+N at a supply voltage of 18 V. The broad voltage input range and the high output power makes this amplifier versatile enough to work with battery or line powered systems.

An on-chip DSP supports Texas Instruments Smart Amp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of loudspeakers.

Y-Bridge power architecture improves amplifier efficiency by internally selecting the supplies for optimal headroom. Brownout prevention scheme with adjustable threshold allows reducing the gain in signal path when the supply drops.

The Hybrid-Pro algorithm allows user to optimize efficiency and improve battery life by controlling the external power supply.

Up to eight TAS2781 devices can share a common bus via I 2S/TDM and I 2C/SPI interfaces.

The TAS2781 is available in a 30 pin HR-QFN package for a compact PCB footprint.

The TAS2781 is a mono, digital input Class-D audio amplifier optimized for efficiently driving high peak power into loudspeakers. The Class-D amplifier is capable of delivering 25 W of continuous power into a 4 Ω load with less than 1% THD+N at a supply voltage of 18 V. The broad voltage input range and the high output power makes this amplifier versatile enough to work with battery or line powered systems.

An on-chip DSP supports Texas Instruments Smart Amp speaker protection algorithm. The integrated speaker voltage and current sense provides for real-time monitoring of loudspeakers.

Y-Bridge power architecture improves amplifier efficiency by internally selecting the supplies for optimal headroom. Brownout prevention scheme with adjustable threshold allows reducing the gain in signal path when the supply drops.

The Hybrid-Pro algorithm allows user to optimize efficiency and improve battery life by controlling the external power supply.

Up to eight TAS2781 devices can share a common bus via I 2S/TDM and I 2C/SPI interfaces.

The TAS2781 is available in a 30 pin HR-QFN package for a compact PCB footprint.
filter Find other Speaker amps
Download View video with transcript Video

Request more information

To request access to TAS2781 PurePath™ Console software and other design resources: Request now

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TAS2780 ACTIVE 25-W, digital input, 4.5-V to 24-V 6-A peak smart amp with I/V sense for speaker protection Without miniDSP

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet TAS2781 24-V Class-D Amplifier with Real Time Integrated Speaker Protection and Audio Processing datasheet (Rev. B) PDF | HTML 26 Jan 2023
Application note EMI Filter Selection in Class-D Amplifier a Post Filter Feedback Benefits and Design Considerations for TAS27X PDF | HTML 02 Jul 2024
Application note TAS2781, TAS2783 Audio Enhancement (Rev. A) PDF | HTML 30 Apr 2024
Application note TAS27xx Introduction to Click and Pop Noise Measurement in Class-D Audio Amplifiers PDF | HTML 26 Mar 2024
Application note TAS2781 and TAS2783 Hybrid-Pro Boost Controller PDF | HTML 08 Oct 2022
User guide TAS2781EVM User's Guide PDF | HTML 28 Jun 2022
Application note Y-Bridge in Class-D Amplifiers for Improving Efficiency PDF | HTML 19 Nov 2021
Application note Limitations of Capacitor only EMI Filters on Class-D Amplifiers PDF | HTML 21 Jul 2020
Application note Requesting Access to Audio Software 18 Jun 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TAS2781EVM — TAS2781 evaluation module for mono Class-D audio amplifier with digital input and speaker IV sense

TAS2781EVM is designed to be used as stand-alone evaluation module, and provides the user with the tools to integrate TI's smart amplifier TAS2781 into the end system. This EVM provides mono speaker output using the TAS2781 Smart Amp. The user can control and configure the TAS2781EVM using the (...)
User guide: PDF | HTML
Not available on TI.com
Application software & framework

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.

PurePath Console’s (...)
Supported products & hardware

Supported products & hardware

Products
Audio CODECs
TAC5111 — Low-power mono audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC TAC5111-Q1 — Automotive low power mono audio codec with 102-dB dynamic range ADC, 106-dB DAC TAC5112 — Low-power stereo audio codec with 105dB dynamic range ADC and 114dB dynamic range DAC TAC5112-Q1 — Automotive low-power stereo audio codec with 102-dB dynamic range ADC, 106-dB DAC TAC5211 — High-performance mono audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC TAC5212 — High-performance stereo audio codec with 119dB dynamic range ADC and 120dB dynamic range DAC TAC5212-Q1 — Automotive low-power stereo audio codec with 115-dB dynamic range ADC, 120-dB DAC TAC5311-Q1 — Automotive mono audio codec with 102-dB dynamic range ADC, 106-dB DAC, HV-input and diagnostics TAC5312-Q1 — Automotive stereo audio codec with 102-dB dynamic range ADC, 106-dB DAC, HV-input and diagnostics TAC5411-Q1 — Automotive mono audio codec with dynamic range of 110-dB ADC, 120-dB DAC, HV-input and diagnostics TAC5412-Q1 — Automotive stereo audio codec with 110-dB dynamic range ADC, 120-dB DAC, HV-input and diagnostics TLV320AIC3268 — TLV320AIC3268 Ultra Low Power Stereo Audio Codec
Audio DACs
PCM5142 — 2V RMS DIRECTPATH 112dB Audio Stereo DAC with PCM interface and fully programmable miniDSP PCM5242 — 4.2-VRMS DirectPath™, 32-bit, 384-kHz, 114-dB Audio Stereo DAC TAD5112 — Low-power stereo audio DAC with 110dB dynamic range, and headphone and line driver TAD5112-Q1 — Automotive low-power stereo audio DAC with 106-dB dynamic range TAD5212 — High-performance stereo audio DAC with 120dB dynamic range, and headphone and line driver TAD5212-Q1 — Automotive low-power stereo audio DAC with 120-dB dynamic range PCM1690 — 113dB SNR 8-Channel Audio DAC with Differential Outputs
Audio ADCs
PCM1841-Q1 — Automotive, quad-channel 32-bit 192-kHz audio analog-to-digital converter (ADC) PCM3120-Q1 — Automotive, stereo, 106-dB SNR, 768-kHz, low-power software-controlled audio ADC PCM3140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 106-dB SNR PCM5120-Q1 — Automotive, stereo, 120-dB SNR, 768-kHz, low-power software-controlled audio ADC PCM5140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 120-dB SNR PCM6120-Q1 — Automotive, stereo, 123-dB SNR, 768-kHz, low-power software-controlled audio ADC PCM6140-Q1 — Automotive, quad-channel 768-kHz Burr-Brown™ audio analog-to-digital converter (ADC) with 122-dB SNR PCMD3140-Q1 — Automotive, 127-dB SNR, 768-kHz, four-channel, PDM-input to TDM- or I²S-output converter PCMD3180-Q1 — Automotive, eight-channel pulse-density-modulation input to TDM or I²S output converter TAA5212 — High-performance stereo audio ADC with 119dB dynamic range and configurable digital filters TAA5412-Q1 — Automotive stereo audio ADC with 110-dB dynamic range, HV-input integrated HV-MICBIAS, diagnostics PCMD3180 — Eight-channel pulse-density-modulation input to TDM or I²S output converter PCMD3140 — Four-channel PDM-input to TDM- or I²S-output converter
Headphone amps
TPA6166A2 — 43-mW, stereo, analog input headphone amplifier with accessory detection
Speaker amps
TAS2110 — 6.1W mono digital input Class-D speaker amp with integrated 11V Class-H boost TAS2552 — 4-W, digital/analog input smart amp with I/V sense for speaker protection & integ. 8.5-V boost TAS2555 — 5.7-W, digital input smart amp with integrated speaker protection, advanced EQ & 8.5-V Class-H boost TAS2557 — 5.7-W, digital input smart amp with integrated speaker protection, advanced EQ & 8.5-V Class-H boost TAS2559 — 5.7-W, digital input smart amp with integrated speaker protection with stereo processing TAS2560 — 5.6-W digital input smart amp with I/V sense for speaker protection & integrated 8.5-V Class-H boost TAS2562 — 6.1-W, digital input smart amp with I/V sense for speaker protection & integrated 11-V Class-H boost TAS2563 — 6.1-W, digital input, smart amp & integrated speaker protection, advanced EQ & 11-V Class-H boost TAS2564 — 7-W, digital input smart amp with I/V sense for speaker protection & integrated 13-V Class-H boost TAS2572 — 6.6W digital-input smart amplifier with I/V sense and integrated 13V Class-H boost TAS2764 — 13-W, digital input, 2.3-V to 16-V smart amp I/V sense for speaker protection and multi-level supply TAS2770 — 20-W, digital input, 4.5- to 18-V smart amp with I/V sense for speaker protection TAS2780 — 25-W, digital input, 4.5-V to 24-V 6-A peak smart amp with I/V sense for speaker protection TAS2781 — 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier TAS5729MD — 12-W stereo, 24-W mono, 4.5- to 26.4-V supply, digital input open loop Class-D audio amplifier w/ HP TAS5731 — 20-W stereo, 41-W mono, 8- to 21.5-V, digital input open loop Class-D audio amplifier w/ 2.1 support TAS5733L — 10-W stereo, 20-W mono, 8- to 16.5-V, digital input open loop Class-D audio amplifier w/ EQ & AGL TAS5751M — 25-W stereo, 40-W mono, 8- to 26.4-V, digital input open loop Class-D audio amplifier w/ EQ & AGL TAS5754M — 40-W stereo, 61-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier TAS5756M — 30-W stereo, 40-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier TAS5760L — 21-W stereo, 42-W mono, 4.5- to 16.4-V supply, digital input Class-D audio amplifier TAS5760LD — 21-W stereo, 42-W mono, 4.5- to 16.4-V, digital input Class-D audio amplifier w/ integrated HP TAS5760M — 55-W stereo, 114-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier TAS5760M-Q1 — Automotive, 25-W, 2-ch, 4.5- to 26.4-V supply digital input Class-D audio amplifier TAS5760MD — 55-W stereo, 114-W mono, 4.5- to 26.4-V, digital input Class-D audio amplifier w/ integrated HP TAS5766M — 50-W stereo, 100-W mono, 4.5- to 26.4-V supply, digital input Class-D Smart Audio Amplifier TAS5780M — 20-W stereo, 40-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier TAS5782M — 20-W stereo, 40-W mono, 4.5- to 26.4-V, digital input Class-D Smart Audio Amplifier w/ processing TAS5805M — 23-W stereo, 45-W mono, 4.5- to 26.4-V supply, digital input Class-D audio amplifier w/ processing TAS5822M — 35-W, inductor-less, digital input, stereo, closed-loop Class-D amp with 96-kHz enhanced process TAS5825M — 38-W stereo, 65-W mono, 4.5- to 26-V, digital input Class-D Smart Audio Amplifier w/ 192kHz arch TAS5825P — 4.5V to 26.4V Class-H control digital-in Class-D audio amp with ultra-low idle & superior efficiency TAS6422-Q1 — Automotive, 75-W, 2-MHz, 2-ch 4.5- to 26.4-V digital input Class-D audio amplifier w/ load dump TAS6424-Q1 — Automotive, 75-W, 2-MHz, 4-ch, 4.5- to 26.4-V digital input Class-D audio amplifier TAS6424E-Q1 — Automotive, 75-W, 2-MHz, quad-channel, 4.5- to 26.4-V digital input Class-D audio amplifier TAS6424L-Q1 — Automotive, 27-W, 2-MHz, 4-ch 4.5- to 18-V digital input Class-D audio amplifier w/ load dump TPA6404-Q1 — Automotive, 45-W, 2-MHz, 4-ch 4.5- to 18-V supply analog input Class-D audio amplifier w/ load dump
Piezo speaker drivers/receivers
DRV5825P — 4.5-V to 26.4-V, 7.5-A stereo, 15-A mono, digital input, Piezo driver with smart I/V protection
Hardware development
Evaluation board
ADC3120EVM-PDK — TLV320ADC3120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 106-dB SNR ADC3120Q1EVM-PDK — PCM3120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 106-dB SNR ADC5120EVM-PDK — TLV320ADC5120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 120-dB SNR ADC5120Q1EVM-PDK — PCM5120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 120-dB SNR ADC6120EVM-PDK — TLV320ADC6120 evaluation module for stereo-channel, 768-kHz, Burr-Brown™ audio ADC with 123-dB SNR ADC6120Q1EVM-PDK — PCM6120-Q1 evaluation module for stereo, 768-kHz, audio analog-to-digital converter with 123-dB SNR PCM1809EVM — PCM1809 evaluation module PCMD3140Q1EVM-PDK — PCMD3140-Q1 evaluation module for four-channel, PDM-input to TDM- or I²S-output converter PP-SALB2-EVM — PP-SALB2-EVM Smart amp speaker characterization board evaluation module (Learning Board 2) TAS2555YZEVM — TAS2555 5.7W Class-D Audio Amplifier Evaluation Module TAS2557EVM — TAS2557 5.7-W Class-D Audio Amplifier Evaluation Module with Class-H Boost and Speaker Sense TAS2559EVM — TAS2559 5.7-W Class-D Audio Amplifier Evaluation Module TAS2560EVM — TAS2560 5.6W Class-D Audio Amplifier Evaluation Module TAS2770EVM — TAS2770EVM Mono, Digital Input, Class-D, IV Sense Audio Amplifier Evaluation Module for QFN Package TAS2781EVM — TAS2781 evaluation module for mono Class-D audio amplifier with digital input and speaker IV sense TAS3251EVM — TAS3251 175W Stereo / 350W Mono Ultra-HD Digital-In Class-D Evaluation Module TAS5721EVM — TAS5721 Evaluation Module TAS5733LEVM — TAS5733L Digital Input, Open-Loop Class-D Audio Amplifier Evaluation Module TAS5751MEVM — TAS5751M Digital Input, Open Loop Class-D Audio Amplifier Evaluation Module TAS5754MDCAEVM — TAS5754M 30-W Digital I2S Input, Closed-Loop Audio Class-D Amplifier Evaluation Module TAS5756MDCAEVM — TAS5756M 30-W Digital I2S Input, Closed-Loop Audio Class-D Amplifier Evaluation Module TAS5760XXEVM — TAS5760M/MD/L/LD Evaluation Module TAS5782MEVM — TAS5782M Digital Input Closed-Loop Class-D Audio Amplifier with 96-kHz Processing Evaluation Module TAS5805MEVM — TAS5805M Digital Input Stereo Closed-Loop Class-D Audio Amplifier with Enhanced Processing EVM TAS5825MEVM — Digital-input closed-loop class-D audio amp with 96kHz/192kHz extended processing evaluation module
Request
Application software & framework

TAS2781-LINUX — TAS2781 Linux Driver and Factory Calibration tool

TAS2781 Linux Driver supports configuring registers through binary file, Factory Calibration tool is used to calibrate the impedance of the speaker in manufacturing and keep consistent loudness from system to system.
Supported products & hardware

Supported products & hardware

Products
Speaker amps
TAS2781 — 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier
Launch Download
Driver or library

TAS2781-AMIXER-BASED-FTC-CODE — Factory calibration tool for tas2563/tas2781 based on amixer kcontrol

Factory calibration tool for tas2563/tas2781 based on amixer kcontrol
Supported products & hardware

Supported products & hardware

Products
Speaker amps
TAS2781 — 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier TAS2563 — 6.1-W, digital input, smart amp & integrated speaker protection, advanced EQ & 11-V Class-H boost
Hardware development
Evaluation board
TAS2781EVM — TAS2781 evaluation module for mono Class-D audio amplifier with digital input and speaker IV sense
Launch Download options
Support software

TAS2781-SW — TAS2781 software

TAS2781 software
Supported products & hardware

Supported products & hardware

Products
Speaker amps
TAS2781 — 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier
Hardware development
Evaluation board
TAS2781EVM — TAS2781 evaluation module for mono Class-D audio amplifier with digital input and speaker IV sense
Request
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
VQFN-HR (RYY) 30 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos