Calculation tool
LMR51610-DESIGN-CALC — LMR51610-DESIGN-CALC
LMR51610-DESIGN-CALC
LMR51610
SIMPLE SWITCHER® power converter with 4.5V-to-65V 1A synchronous buck and 25µA quiescent current
Data sheet
LMR51610
- Functional Safety-Capable
- Configured for rugged industrial applications
- 4-V to 65-V input voltage range
- Input transient protection up to 70-V
- 0.6-A/1-A continuous output current
- 80-ns minimum switching on time
- Fixed 400-kHz and 1.1-MHz switching frequency
- –40°C to 150°C junction temperature range
- 98% maximum duty cycle
- Monotonic start-up with pre-biased output
- Short-circuit protection with hiccup mode
- Precision enable
- ±1.5% tolerance voltage reference
- Small design size and ease of use
- Integrated synchronous rectification
- Internal compensation for ease of use
- SOT-23 package
- Various options in pin-to-pin compatible package
- PFM and forced PWM (FPWM) options
- Pin-to-pin compatible with the LMR16006, LV2862, LMR50410, TPS560430, LMR54406, and LMR54410
- Create a custom design using the LMR516xx with the WEBENCH® Power Designer
The LMR516xx is a wide-V IN, easy-to-use synchronous buck converter capable of driving up to 0.6-A and 1-A load current. With a wide input range of 4 V to 65 V, the device is designed for a wide range of industrial applications for power conditioning from an unregulated source.
The LMR516xx operates at 400-kHz and 1.1-MHz switching frequency to support use of relatively small inductors for an optimized design size. The LMR516xx has a PFM version to realize high efficiency at light load and a FPWM version to achieve constant frequency and small output voltage ripple over the full load range. Soft-start and compensation circuits are implemented internally, which allow the device to be used with minimal external components.
The device has built-in protection features, such as cycle-by-cycle current limit, hiccup mode short-circuit protection, and thermal shutdown in case of excessive power dissipation.
Technical documentation
No results found. Please clear your search and try again.
View all 6 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LMR516xxSIMPLE SWITCHERPower Converter, 4-V to 65-V, 0.6-A/1-A Buck Converter in a SOT-23 Package datasheet (Rev. B) | PDF | HTML | 06 Dec 2023 |
| Application note | Estimate, Measure, and Reduce the Voltage Drop of Buck Converter in Battery Power Applications | PDF | HTML | 27 Jun 2024 | |
| Application note | SOT236 IBB Application Design with LMR51610 | PDF | HTML | 05 Dec 2023 | |
| Functional safety information | LMR516xx Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 25 Aug 2023 | |
| EVM User's guide | LMR51610EVM User's Guide | PDF | HTML | 06 Jun 2023 | |
| Certificate | LMR51610EVM EU Declaration of Conformity (DoC) | 23 May 2023 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
LMR51610EVM — LMR51610 evaluation module
The LMR51610 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR51610 step-down converter. The EVM is 3.3V output, with a wide input range of up to 65V, 1A load current, with internal fixed frequency, and is able to accept AC signal injection for loop (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.