Calculation tool
Data sheet
A newer version of this product is available
Same functionality with different pin-out to the compared device
LMR33630-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Capable
- Configured for rugged automotive applications
- Input voltage range: 3.8 V to 36 V
- Output voltage range: 1 V to 24 V
- Output current: 3 A
- 75-mΩ/50-mΩ RDS-ON power MOSFETs
- Peak-current-mode control
- Short minimum on-time of 68 ns
- Frequency: 400 kHz, 1.4 MHz, 2.1 MHz
- Integrated compensation network
- Low EMI and switching noise
- HotRod™ package
- Parallel input current paths
- High power conversion at all loads
- Peak efficiency > 95%
- Low shutdown quiescent current of 5 µA
- Low operating quiescent current of 25 µA
- Create a custom design using the LMR33630-Q1 with the WEBENCH Power Designer
The LMR33630-Q1 automotive-qualified regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged applications. The LMR33630-Q1 drives up to 3 A of load current from an input of up to 36 V. The LMR33630-Q1 provides high light load efficiency and output accuracy in a very small solution size. Features such as a power-good flag and precision enable provide both flexible and easy-to-use solutions for a wide range of applications. The LMR33630-Q1 automatically folds back frequency at light load to improve efficiency. Integration eliminates most external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LMR33630-Q1 is available in a 12-pin 3 mm × 2 mm next generation VQFN package with wettable flanks.
Technical documentation
No results found. Please clear your search and try again.
View all 13 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
LMR33630ADDAEVM — LMR33630 Synchronous Step-Down Converter Evaluation Module
The LMR33630ADDAEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630 synchronous step-down converter. The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
User guide: PDF
Evaluation board
LMR33630ARNXEVM — LMR33630 Synchronous Step Down Converter Evaluation Module
The LMR33630 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630A 400kHz synchronous step-down converter. The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
User guide: PDF
Evaluation board
LMR33630CDDAEVM — LMR33630 Synchronous Step-Down Converter Evaluation Module
The LMR33630 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630 synchronous step-down converter. The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
User guide: PDF
Evaluation board
LMR33630CRNXEVM — LMR33630 Synchronous Step Down Converter Evaluation Module
The LMR33630 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR33630C 2.1MHz synchronous step-down converter. The LMR33630 provides exceptional efficiency and accuracy in a very small solution size.
User guide: PDF
Calculation tool
SNVR484 — LMR336x0 Component Calculator
Supported products & hardware
Products
AC/DC & DC/DC converters (integrated FET)
Reference designs
TIDA-050031 — Back-up battery power reference design for automotive emergency calling applications
This back-up power reference design is for automotive E-Call application. It uses one cell LiFePO4 as the backup battery. The minimum backup battery voltage can be down to 2 V with boost converter TPS61088-Q1; the maximum output power can be 8 V/1.7A. This reference design is low-cost, high (...)
Reference designs
TIDA-01628 — Reference design for automotive cluster driver notification functions
This reference design implements power and driver notification functions typically found in an automotive instrument cluster. The design features reverse battery protection, a pre-boost stage to support cold-crank battery voltage conditions down to 3.5 volts, buck regulators for 3.3-V and 5-V (...)
Reference designs
TIDA-050015 — Automotive ADAS camera power supply reference design optimized for solution size and low noise
This wide-input power-supply reference design is specifically designed for space-constrained automotive ADAS camera applications. This size-optimized design uses front-end protection paired with a wide input voltage DC/DC converter to enable off-battery operation. The front-end filter and (...)
Reference designs
TIDA-020012 — Automotive pixelated dome light reference design for interior lighting
This reference design details a solution to drive and control 30 LEDs individually for automotive interior dome light applications. The high pixel count can be used to create different light zones or welcome light animations. The design also implements LED multiplexing functionality to control up (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| VQFN-HR (RNX) | 12 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.