Home Sensors Temperature sensors Digital temperature sensors
Home
Sensors
Temperature sensors
Digital temperature sensors

LM73

ACTIVE

±1°C Temperature Sensor with I2C/SMBus Interface

Order now
Data sheet

LM73

ACTIVE
Data sheet Order now

Product details

Local sensor accuracy (max) 1 Type Local Operating temperature range (°C) -40 to 150 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion, UL recognized Supply current (max) (µA) 550 Temp resolution (max) (bps) 14 Remote channels (#) 0 Addresses 6 Rating Catalog
Local sensor accuracy (max) 1 Type Local Operating temperature range (°C) -40 to 150 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, One-shot conversion, UL recognized Supply current (max) (µA) 550 Temp resolution (max) (bps) 14 Remote channels (#) 0 Addresses 6 Rating Catalog
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • Single Address Pin Offers Choice of Three
    Selectable Addresses Per Version for a Total of
    Six Possible Addresses.
  • SMBus and I2C-compatible Two-Wire Interface
  • Supports 400-Khz Operation
  • Shutdown Mode With One-shot Feature Available
    for Very Low Average Power Consumption
  • Programmable Digital Temperature Resolution
    From 11 Bits to 14 Bits
  • Fast Conversion Rate Ideal for Quick Power Up
    and Measuring Rapidly Changing Temperature
  • Open-Drain ALERT Output Pin Goes Active When
    Temperature is Above a Programmed
    Temperature Limit
  • Very Stable, Low-noise Digital Output
  • UL Recognized Component
  • Key Specifications
    •  Supply Current
      • Operating
        • 320 µA (Typical)
        • 495 µA (Maximum)
      • Shutdown
        • 8 µA (Maximum)
        • 1.9 µA (Typical)
    • Temperature Accuracy
      • −10°C to 80°C: ±1.0°C (Maximum)
      • −25°C to 115°C: ±1.5°C (Maximum)
      • −40°C to 150°C: ±2°C (Maximum)
    • Resolution
      • 0.25°C to 0.03125°C
    • Conversion Time
      • 11-Bit (0.25°C): 14 ms (Maximum)
      • 14-Bit (0.03125°C): 112 ms (Maximum)
  • Single Address Pin Offers Choice of Three
    Selectable Addresses Per Version for a Total of
    Six Possible Addresses.
  • SMBus and I2C-compatible Two-Wire Interface
  • Supports 400-Khz Operation
  • Shutdown Mode With One-shot Feature Available
    for Very Low Average Power Consumption
  • Programmable Digital Temperature Resolution
    From 11 Bits to 14 Bits
  • Fast Conversion Rate Ideal for Quick Power Up
    and Measuring Rapidly Changing Temperature
  • Open-Drain ALERT Output Pin Goes Active When
    Temperature is Above a Programmed
    Temperature Limit
  • Very Stable, Low-noise Digital Output
  • UL Recognized Component
  • Key Specifications
    •  Supply Current
      • Operating
        • 320 µA (Typical)
        • 495 µA (Maximum)
      • Shutdown
        • 8 µA (Maximum)
        • 1.9 µA (Typical)
    • Temperature Accuracy
      • −10°C to 80°C: ±1.0°C (Maximum)
      • −25°C to 115°C: ±1.5°C (Maximum)
      • −40°C to 150°C: ±2°C (Maximum)
    • Resolution
      • 0.25°C to 0.03125°C
    • Conversion Time
      • 11-Bit (0.25°C): 14 ms (Maximum)
      • 14-Bit (0.03125°C): 112 ms (Maximum)

The LM73 is an integrated, digital-output temperature sensor featuring an incremental Delta-Sigma ADC with a two-wire interface that is compatible with the SMBus and I2C interfaces. The host can query the LM73 at any time to read temperature.

Available in a 6-pin SOT package, the LM73 occupies very little board area while operating over a wide temperature range (–40°C to 150°C) and providing ±1°C accuracy from –10°C to 80°C. The user can optimize between the conversion time and the sensitivity of the LM73 by programming it to report temperature in any of four different resolutions. Defaulting to 11-bit mode (0.25°C/LSB), the LM73 measures temperature in a maximum time of 14 ms, making it ideal for applications that require temperature data very soon after power-up. In its maximum resolution, 14-bit mode (0.03125°C/LSB), the LM73 is optimized to sense very small changes in temperature.

A single multi-level address line selects one of three unique device addresses. An open-drain ALERT output goes active when the temperature exceeds a programmable limit. Both the data and clock lines are filtered for excellent noise tolerance and reliable communication. Additionally, a time-out feature on the clock and data lines causes the LM73 to automatically reset these lines if either is held low for an extended time, thus exiting any bus lock-up condition without processor intervention.

The LM73 is an integrated, digital-output temperature sensor featuring an incremental Delta-Sigma ADC with a two-wire interface that is compatible with the SMBus and I2C interfaces. The host can query the LM73 at any time to read temperature.

Available in a 6-pin SOT package, the LM73 occupies very little board area while operating over a wide temperature range (–40°C to 150°C) and providing ±1°C accuracy from –10°C to 80°C. The user can optimize between the conversion time and the sensitivity of the LM73 by programming it to report temperature in any of four different resolutions. Defaulting to 11-bit mode (0.25°C/LSB), the LM73 measures temperature in a maximum time of 14 ms, making it ideal for applications that require temperature data very soon after power-up. In its maximum resolution, 14-bit mode (0.03125°C/LSB), the LM73 is optimized to sense very small changes in temperature.

A single multi-level address line selects one of three unique device addresses. An open-drain ALERT output goes active when the temperature exceeds a programmable limit. Both the data and clock lines are filtered for excellent noise tolerance and reliable communication. Additionally, a time-out feature on the clock and data lines causes the LM73 to automatically reset these lines if either is held low for an extended time, thus exiting any bus lock-up condition without processor intervention.
filter Find other Digital temperature sensors
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TMP102 ACTIVE 2C digital temperature sensor, I2C/SMBus in 2.56mm2 package Lower cost, smaller size and lower power alternative
TMP1075 ACTIVE 1°C I²C temperature sensor with performance upgrades to industry standard LM75 / TMP75 Lower power (4 µA) I²C alternative with support for up to 32 device addresses

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet LM73 2.7-V, SOT-23, 11- to 14-Bit Digital Temperature Sensor With 2-Wire Interface datasheet (Rev. F) PDF | HTML 29 Oct 2015
Application note How to Read and Interpret Digital Temperature Sensor Output Data PDF | HTML 12 Apr 2024
Certificate UL Certificate of Compliance Vol1-Sec6 E232195 09 Aug 2018
Application note Applying I2C-Compatible Temperature Sensors in Systems With Slow Clock Edges (Rev. A) 06 May 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Driver or library

LM73SW-LINUX — Linux Driver for LM73

The Linux driver supports the LM73 Temperature Sensor. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.

 

Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:

  • lm73

 

Linux Source Files

(...)

View Options
Support software

DIGITALTEMPSENSORSEVM-SW — Eval Board Software for Hardware Monitors and Digital Temp Sensors

Evaluation Board Software for Hardware Monitors and Digital Temperature Sensors
Supported products & hardware

Supported products & hardware

Products
Digital temperature sensors
LM63 — 1 remote and local temperature sensor with fan control LM64 — 1 remote and local temp sensor with fan control and 5 GPIO's LM71 — ±1.5°C Temperature Sensor with SPI Interface LM71-Q1 — Automotive Grade, ±1.5°C Temperature Sensor with SPI Interface LM73 — ±1°C Temperature Sensor with I2C/SMBus Interface LM86 — ±0.75°C remote and local temperature sensor with SMBus interface LM89 — ±0.75°C remote and local temperature sensor with SMBus interface and 2 addresses for bus sharing LM90 — Remote and Local Temperature Sensor with SMBus Interface LM93 — 2 remote, 1 local temp sensor with hardware monitor and 16 power supply voltage monitors LM95010 — ±2°C Temperature Sensor with SensorPath Interface LM95071 — ±1°C Temperature Sensor with SPI Interface LM95221 — ±3°C dual remote & local temperature sensor with beta compensation and SMBus, I2C LM95231 — Dual Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface LM95235 — ±0.75°C remote & local temperature sensor with SMBus, beta compensation for 65/90n LM95235-Q1 — Automotive Grade, ±2°C Remote and Local Temperature Sensor with TruTherm Technology and SMBus LM96000 — Hardware monitor with fan control and 6 power supply voltage monitors LM96080 — 1 local temp sensor with fan speed and power supply voltage monitor LM96163 — 1 remote and local temp sensor with beta compensation and fan control LM99 — Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface
Download
Support software

SENSOREVAL — Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
Supported products & hardware

Supported products & hardware

Products
Digital temperature sensors
LM63 — 1 remote and local temperature sensor with fan control LM64 — 1 remote and local temp sensor with fan control and 5 GPIO's LM71 — ±1.5°C Temperature Sensor with SPI Interface LM71-Q1 — Automotive Grade, ±1.5°C Temperature Sensor with SPI Interface LM73 — ±1°C Temperature Sensor with I2C/SMBus Interface LM75A — 2C industry standard temperature sensor, I2C/SMBus interface LM86 — ±0.75°C remote and local temperature sensor with SMBus interface LM89 — ±0.75°C remote and local temperature sensor with SMBus interface and 2 addresses for bus sharing LM90 — Remote and Local Temperature Sensor with SMBus Interface LM93 — 2 remote, 1 local temp sensor with hardware monitor and 16 power supply voltage monitors LM95010 — ±2°C Temperature Sensor with SensorPath Interface LM95071 — ±1°C Temperature Sensor with SPI Interface LM95172-Q1 — Automotive Grade, ±1°C Temperature Sensor with 200°C Capability and SPI Interface LM95214 — ±2°C Quad Remote and Local Temperature Sensor with SMBus Interface LM95221 — ±3°C dual remote & local temperature sensor with beta compensation and SMBus, I2C LM95231 — Dual Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface LM95233 — ±2°C Dual Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface LM95234 — ±2°C Quad Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface LM95235 — ±0.75°C remote & local temperature sensor with SMBus, beta compensation for 65/90n LM95235-Q1 — Automotive Grade, ±2°C Remote and Local Temperature Sensor with TruTherm Technology and SMBus LM95241 — ±1.25°C dual remote & local temperature sensor with beta compensation and SMBus, I LM95245 — ±0.75°C remote & local temperature sensor with SMBus, beta compensation for 45nm d LM96000 — Hardware monitor with fan control and 6 power supply voltage monitors LM96080 — 1 local temp sensor with fan speed and power supply voltage monitor LM96163 — 1 remote and local temp sensor with beta compensation and fan control LM99 — Remote and Local Temperature Sensor with TruTherm Technology and SMBus Interface
Precision ADCs
ADC128D818 — 12-Bit, 82SPS, 8-Ch Delta-Sigma ADC with Temp Sensor, INT / EXT Voltage Reference & I2C Interface
Download
Simulation model

LM73 IBIS Model

SNOM464.ZIP (41 KB) - IBIS Model
Download
Package Pins CAD symbols, footprints & 3D models
SOT-23-THN (DDC) 6 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos