Calculation tool
Data sheet
LM63625-Q1
- AEC-Q100-qualified for automotive applications
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Functional Safety-Capable
- Supports automotive system requirements
- Input voltage range: 3.5V to 36V
- Short 50ns minimum on time
- Good EMI performance Pseudo-random spread spectrum Compatible with CISPR 25
- 23µA low operating quiescent current
- –40°C to +150°C junction temperature range
- High design flexibility
- Small design size
- As small as 10mm × 10mm for 2.5A, 2.2MHz with WSON package
- Highly integrated design
- Low component count
The LM636x5-Q1 is an easy-to-use, synchronous, step-down DC/DC converter designed for rugged automotive applications. The LM636x5-Q1 can drive up to 1.5A or 2.5A of load current from an input of up to 36V. The converter has high light load efficiency and output accuracy in a small design size. Features such as a RESET flag and precision enable provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load improves efficiency while maintaining tight load regulation. Integration eliminates many external components and provides a pinout designed for simple PCB layout. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, and hiccup short-circuit protection. The LM636x5-Q1 is available in the HTSSOP 16-pin power package, with PowerPAD™ integrated circuit package, and the WSON 12-pin power package.
Similar products you might be interested in
Same functionality with different pin-out to the compared device
Technical documentation
No results found. Please clear your search and try again.
View all 17 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
LM63625EVM — 3.5-V to 36-V, 2.5-A synchronous step-down converter evaluation module
The LM63625 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM63625 synchronous step-down converter.
User guide: PDF
Evaluation board
LM63625QDRREVM — 3.5-V to 36-V, 2.5-A step-down voltage converter with spread spectrum evaluation module
The LM63625QDRREVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM63635 synchronous step-down converter.
User guide: PDF
Evaluation board
LM63635DNEVM — LM63635DN evaluation module for 3.5-V to 36-V, 3.25-A step-down voltage converter with spread spectr
LM63635DNEVM evaluation module (EVM) helps designers evaluate the operation and performance of the LM636x5CAQDRRQ1 buck regulator. The LM636x5CAQDRRQ1 is a family of easy-to-use synchronous step-down DC/DC converters capable of driving up to 3.5-A of load current from an input voltage of 3.5-V to (...)
Reference designs
PMP22829 — Synchronous buck converter reference design for infotainment applications
This reference design is a synchronous buck converter circuit using the LM63625-Q1 controller integrated circuit (IC). The design accepts an input voltage of 9.8 VIN to 16 VIN and provides a regulated output voltage of 9.3 VOUT capable of delivering up to 2.1 A of current. The design is built on a (...)
Test report: PDF
Reference designs
PMP22648 — High-power density reference design for automotive vehicle-to-everything (V2X) power
This reference design provides the system rails for automotive vehicle-to-everything power. A 5-V bus is generated by the off-battery buck converter (LM63625-Q1), and this supplies all the point-of-load devices. The bus converter switches at 2.1 MHz, and the load converters (TPS628501-Q1) switch (...)
Reference designs
PMP30794 — 2-MHz synchronous 5-V buck reference design
This reference design uses a tiny automotive buck converter to support a 5-V rail by input voltage range 6.5-V up to 32-Vpk surge. The layout and design are optimized to pass CISPR-25. The design is equipped with a two-stage input filter to minimize conducted emissions and a solid ground plane to (...)
Reference designs
PMP30785 — Automotive multi-rail power supply for driving monitoring system reference design
This reference design shows the performance of a non-isolated automotive power supply for a driving monitoring system for the electronic control unit (ECU). The reference design includes our power portfolio with nine power sockets.
Reference designs
PMP22030 — Efficient, low-heat, CISPR 25 class 5-compliant power reference design for infotainment display
This reference design is focused on the power tree for an automotive infotainment display unit covering various power supply rails including two off-battery converters providing 5.0-V and 3.3-V, and intermediary system rails of 1.8-V and 1.1-V. The test results demonstrate high efficiency, low (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| HTSSOP (PWP) | 16 | Ultra Librarian |
| WSON (DRR) | 12 | Ultra Librarian |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.