Home Motor drivers Stepper motor drivers
Home
Motor drivers
Stepper motor drivers

DRV8411

ACTIVE

1.65V-to-11V, 4A dual H-bridge motor driver with current regulation

Order now
Data sheet

DRV8411

ACTIVE
Data sheet Order now

Product details

Number of full bridges 2 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Full-scale current (A) 2.1 Peak output current (A) 4 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 0.04 Control mode PWM Control interface Hardware (GPIO) Microstepping levels 2 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 2 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Full-scale current (A) 2.1 Peak output current (A) 4 RDS(ON) (HS + LS) (mΩ) 400 Sleep current (µA) 0.04 Control mode PWM Control interface Hardware (GPIO) Microstepping levels 2 Features Current Regulation Rating Catalog Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 16 32 mm² 5 x 6.4 WQFN (RTE) 16 9 mm² 3 x 3
  • Dual H-bridge motor driver, can drive -
    • One bipolar stepper motor
    • One or two brushed DC motors
    • Solenoids and other inductive loads
  • Low ON-resistance: HS + LS = 400mΩ (Typical, 25°C)
  • Wide Power Supply Voltage Range
    • 1.65 to 11V

  • Pin-to-pin compatible with -

  • High output current capability: 4A Peak

  • PWM control interface

  • Supports 1.8V, 3.3V, and 5V logic inputs
  • Integrated current regulation
  • Low-power sleep mode
    • ≤ 40nA at VVM = 5V, TJ = 25°C

  • Small package and footprint

    • 16-pin HTSSOP with PowerPAD™, 5.0×4.4mm

    • 16-Pin WQFN with PowerPAD™, 3.0×3.0mm

  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault Indication Pin (nFAULT)
  • Dual H-bridge motor driver, can drive -
    • One bipolar stepper motor
    • One or two brushed DC motors
    • Solenoids and other inductive loads
  • Low ON-resistance: HS + LS = 400mΩ (Typical, 25°C)
  • Wide Power Supply Voltage Range
    • 1.65 to 11V

  • Pin-to-pin compatible with -

  • High output current capability: 4A Peak

  • PWM control interface

  • Supports 1.8V, 3.3V, and 5V logic inputs
  • Integrated current regulation
  • Low-power sleep mode
    • ≤ 40nA at VVM = 5V, TJ = 25°C

  • Small package and footprint

    • 16-pin HTSSOP with PowerPAD™, 5.0×4.4mm

    • 16-Pin WQFN with PowerPAD™, 3.0×3.0mm

  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault Indication Pin (nFAULT)

The DRV8411 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65V to accommodate 1.8V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation. The inputs and outputs can be paralleled to drive high current brush DC motors with half the RDS(on).

The device implements current regulation by comparing an internal refernce voltage to the voltage on the xISEN pins, which is proportional to motor current through an external sense resistor. The ability to limit current can significantly reduce large currents during motor startup and stall conditions.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include undervoltage, overcurrent, and overtemperature.

The DRV8411 is part of a family of devices which come in pin-to-pin, scalable RDS(ON) options to support various loads with minimal design changes. See for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.

The DRV8411 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65V to accommodate 1.8V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation. The inputs and outputs can be paralleled to drive high current brush DC motors with half the RDS(on).

The device implements current regulation by comparing an internal refernce voltage to the voltage on the xISEN pins, which is proportional to motor current through an external sense resistor. The ability to limit current can significantly reduce large currents during motor startup and stall conditions.

A low-power sleep mode achieves ultra-low quiescent current draw by shutting down most of the internal circuitry. Internal protection features include undervoltage, overcurrent, and overtemperature.

The DRV8411 is part of a family of devices which come in pin-to-pin, scalable RDS(ON) options to support various loads with minimal design changes. See for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.
filter Find other Stepper motor drivers
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
DRV8411A ACTIVE 1.65V-to-11V, 4A dual H-bridge motor driver with IPROPI current regulation Lower Rdson with higher output current and IPROPI current regulation
Pin-for-pin with same functionality to the compared device
DRV8410 ACTIVE 1.65-V to 11-V, 2.5-A, dual H-bridge motor driver with current regulation Higher Rdson and lower output current

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet DRV8411 Dual H-Bridge Motor Driver with Current Regulation datasheet (Rev. C) PDF | HTML 05 Jun 2024
Product overview Brushed and Stepper Motor Drivers in Video Surveillance PDF | HTML 22 Feb 2024
Certificate DRV8411EVM EU RoHS Declaration of Conformity (DoC) 19 Aug 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV8411EVM — DRV8411 evaluation module dual H-bridge motor driver with current regulation

The DRV8411 evaluation module (EVM) allows designers to evaluate the DRV8411 dual H-bridge driver.  The EVM includes a MCU and a graphical user interface (GUI) for easy control of the motor driver. The EVM comes with all the necessary tools and software to begin spinning motors right away (...)

User guide: PDF | HTML
Not available on TI.com
Firmware

DRV841XEVM-FIRMWARE — Firmware source code for the DRV8410EVM, DRV8411EVM, and DRV8411AEVM

Zipped folder containing manifest and firmware source code for the evaluation modules of the DRV841x family of devices.
Supported products & hardware

Supported products & hardware

Products
Stepper motor drivers
DRV8411A — 1.65V-to-11V, 4A dual H-bridge motor driver with IPROPI current regulation DRV8410 — 1.65-V to 11-V, 2.5-A, dual H-bridge motor driver with current regulation DRV8411 — 1.65V-to-11V, 4A dual H-bridge motor driver with current regulation
Hardware development
Evaluation board
DRV8410EVM — DRV8410 evaluation module dual H-bridge motor driver with current regulation DRV8411EVM — DRV8411 evaluation module dual H-bridge motor driver with current regulation DRV8411AEVM — DRV8411A evaluation module for dual H-bridge motor driver with current regulation
Download options
GUI for evaluation module (EVM)

DRV841XEVM-GUI — GUI installer for the DRV8410EVM, DRV8411EVM, and DRV8411AEVM

Zipped folder containing manifests and GUI installer for DRV841x family of devices.
Supported products & hardware

Supported products & hardware

Products
Stepper motor drivers
DRV8410 — 1.65-V to 11-V, 2.5-A, dual H-bridge motor driver with current regulation DRV8411 — 1.65V-to-11V, 4A dual H-bridge motor driver with current regulation DRV8411A — 1.65V-to-11V, 4A dual H-bridge motor driver with IPROPI current regulation
Hardware development
Evaluation board
DRV8410EVM — DRV8410 evaluation module dual H-bridge motor driver with current regulation DRV8411EVM — DRV8411 evaluation module dual H-bridge motor driver with current regulation DRV8411AEVM — DRV8411A evaluation module for dual H-bridge motor driver with current regulation
Launch Download options
Design tool

DRV8411AEVM Hardware Files

SLVRBO5.ZIP (5499 KB)
Download
Package Pins CAD symbols, footprints & 3D models
HTSSOP (PWP) 16 Ultra Librarian
WQFN (RTE) 16 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos