The TAS2505 is a low power digital input speaker amp with support for 24-bit digital I2S data mono playback.
In addition to driving a speaker amp up to 4-Ω, the device also features a mono headphone driver and a programmable digital-signal processing block. The digital audio data format is programmable to work with popular audio standard protocols (I2S, left/right-justified) in master, slave, DSP and TDM modes. The programmable digital-signal processing block can support Bass boost, treble, or EQ functions. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by register control. The audio functions are controlled using the I2C ™ serial bus or SPI bus.
The device includes an on-board LDO that runs off the speaker power supply to handle all internal device analog and digital power needs. The included POR as power-on-reset circuit reliably resets the device into its default state so no external reset is required at normal usage; however, the device does have a reset pin for more complex system initialization needs. The device also includes two analog inputs for mixing and muxing in both speaker and headphone analog paths.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | User guide | TAS25xx Codec Control EVM (Rev. A) | 31 Oct 2017 | |
| User guide | TAS2505 Application Reference Guide (Rev. C) | PDF | HTML | 28 Nov 2023 | |
| Data sheet | TAS2505 2.6-W Digital/Analog Input Class-D Speaker Amplifier With Audio Processing datasheet (Rev. C) | PDF | HTML | 12 May 2021 | |
| Certificate | TAS2505EVM EU Declaration of Conformity (DoC) | 02 Jan 2019 |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.