BQ25713EVM-017

BQ25713 I2C NVDC Buck Boost Charger Evaluation Module

BQ25713EVM-017

Order now

Overview

The BQ25713 evaluation module (EVM) is an I2C controlled NVDC (narrow voltage DC) buck boost charge controller with N-CH MOSFET Selector and Current Monitoring. The input voltage range, for the buck converter, is between 3.5V and 24 V, with a programmable output of 1–4 cells and a charge output current range of 128mA to 8.128 A. This EVM doesn’t include the EV2400 interface device; this will have to be ordered separately to evaluate the bq25713 EVM.

Features

Host-controlled NVDC 1S-4S battery buck boost charger with 3.5V~24V input; 1V~19.2V charging output and 3V~20.8V OTG output
Ultra low quiescent current of 600 μA and high PFM light load efficiency >80% at 200 mW load and PTM operation to meet energy star and ErP Lot6
High integration charger has comprehensive /PROCHOT, input and battery current monitor (IADP/IBAT), system power monitor (PMON)
Support VAP mode for Intel ICE lake platform
Support I2C communication

Not Included

This EVM does not include the EV2400 interface device

Battery charger ICs

BQ25713 — I2C 1-4 cell NVDC Buck-Boost battery charge controller with USB type C PD support

BQ25713B — Address 2 I2C 1-4 cell NVDC Buck-Boost battery charge controller with USB type C PD support

Download View video with transcript Video

Important note

Prototype evaluation module and ICs are available in limited quantities. Request now

Order & start development

Explore packages of hardware, software and documentation

Evaluate the buck-boost charger controller BQ25713 compatiable with USB and Type-C and power delivery

close

Start evaluating with the required hardware, communication interface and software that you will need to evaluate the BQ25713EVM.

Evaluation board

BQ25713EVM-017 — BQ25713 I2C NVDC Buck Boost Charger Evaluation Module

Required

Why do I need this?

This board allows you to start evaluating the BQ25713.

Not available on TI.com

Interface adapter

EV2400 — USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation Module

Required

Why do I need this?

This is a communication interface board that you will need to configure the BQ25713 registers from a windows PC.

Not available on TI.com

Application software & framework

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Required

Why do I need this?

This GUI software allows you to set the registers for your device.

Supported products & hardware

Download options

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

close

Latest version

Version: 1.3.127

Release date: 01 Jul 2024

open-in-new

View all versions

download

GASGAUGECHEM-SW Latest chemistry database for Battery Management Studio — 0 K

Download Chemistry zip file for bqStudio & use bqStudio Help menu to import the latest chemistries.

lock

BatteryManagementStudio-1.3.127_Build1-windows-installer.exe — 208621 K

Checksum

Products

Battery monitors & balancers

BQ76905 — Low-power monitor and protector for 2S to 5S with high accuracy cell voltage measurement

BQ76907 — Low-power monitor and protector for 2S to 7S with high accuracy cell voltage measurement

BQ769142 — 3-s to 14-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4 battery

BQ76942 — 3-series to 10-series multicell battery monitor and protector

BQ76952 — 3-s to 16-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4

BQ76972 — 3s-to-16s high-accuracy battery monitor and protector for Li-ion, Li-poly and LiFePO4

Battery charger ICs

BQ24800 — SMBus 1-4 cell Buck battery charge controller to support hybrid power boost and battery boost mode

BQ25720 — SMBus 1- to 4-cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG

BQ25723 — I²C 1-4 cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG

BQ25731 — I2C 1-5 cell NVDC buck-boost battery charge controller with USB type-C PD support

BQ25756 — Stand-alone or I²C-controlled 70-V bidirectional buck-boost charge controller with MPPT

BQ25790 — Integrated, NVDC, 5-A 1-cell to 4-cell switch-mode buck-boost battery charger

BQ25792 — I2C controlled, 5-A, 1-4 cell buck-boost charger with dual-input selector and USB PD 3.0 OTG output

Battery fuel gauges

BQ27220 — Single cell pack/system-side CEDV battery fuel (gas) gauge w/pre-programmed chemistry profiles

BQ27320 — Single cell pack/System-side CEDV battery fuel (gas) gauge

BQ27425-G1 — System-side Impedance Track™; fuel gauge with direct battery connection | gas gauge battery

BQ27425-G2A — System-side Impedance Track™; fuel gauge for LiCoO2 battery

BQ27425-G2B — System-side Impedance Track™; fuel gauge LiMn2O4 battery

BQ27427 — Single-cell battery fuel gauge with pre-programmed chemistry and integrated sense resistor

BQ27520-G4 — System side Impedance Track™ fuel gauge with integrated LDO.

BQ27530-G1 — System-side Impedance-Track fuel (gas) gauge with direct battery connection

BQ27531-G1 — Battery management unit Impedance Track™ fuel (gas) gauge for bq2419x charger controller

BQ27532-G1 — Battery management unit Impedance Track™ fuel gauge for bq2425x charger

BQ27545-G1 — Single cell, pack side, Impedance Track™ fuel gauge

BQ27546-G1 — Single cell Impedance Track™ pack side fuel gauge with DSBGA package

BQ27621-G1 — System-side fuel gauge with Dynamic Voltage Correlation, battery gas gauge

BQ27741-G1 — Pack-side Impedance Track™(tm) fuel (gas) gauge with integrated protector

BQ27742-G1 — Single cell Li-ion battery fuel gauge with integrated protection | battery gas gauge

BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series

BQ27Z746 — Pack-side, single-cell Impedance Track™ technology fuel gauge with integrated protector

BQ28Z610 — Battery fuel gauge with integrated protector for 1-2 series packs

BQ34110 — Multi-chemistry high-cell Count battery fuel gauge with integrated rarely discharged module

BQ34210-Q1 — Automotive Qualified Single cell system-side CEDV fuel gauge

BQ34Z100-G1 — Multi-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge

BQ35100 — Battery fuel gauge for non-rechargeable batteries (lithium primary) and end-of-service monitor

BQ4050 — 1-4 series CEDV battery fuel (gas) gauge

BQ40Z50 — 1-4 series Li-ion battery pack manager | battery fuel (gas) gauge

BQ40Z50-R1 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 1.0

BQ40Z50-R2 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 2.0

BQ40Z60 — Complete multi-cell battery manager | battery fuel (gas) gauge

BQ40Z80 — 2-s to 6-s battery pack manager with Impedance Track™ gas gauging

BQ78350 — Companion CEDV Fuel Gauge Battery Management Controller for bq76940 Monitor Family

BQ78350-R1 — CEDV li-ion gas gauge and battery management controller

BQ78Z100 — Impedance Track™ battery fuel (gas) gauge for 1-series to 2-series

Battery protectors

BQ77307 — Low-power protector for 2S to 7S with high accuracy cell voltage measurement

Hardware development

Evaluation board

MKST-3P-ALT-EV2300 — MKS Technology alternative for EV2300 communications transceiver

Documentation

open-in-new

Documentation Overview

Battery Management Studio (bqStudio) Documentation

Release Infomation

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including support for real-time watching, graphing, and logging, an easy interface to send commands, direct low-level communication and I/O, as well as automated and guided support for configuration, calibration, performing a learning cycle, and generating useful files for taking the device to production.

This version of bqStudio supports the latest chemistry updates.
Operating systems: Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit)

Older products such as bq20xxx and bq30xxx are not supported in bqStudio. Download the specific evaluation software from the appropriate product page.

Requires: EV2400 or MKST-3P-ALT-EV2300

What's new

See Release notes

Documentation & related resources

EVM User's guide

bq2571x Evaluation Module User's Guide

HARDWARE AND SOFTWARE PACKAGE

Evaluate the buck-boost charger controller BQ25713 compatiable with USB and Type-C and power delivery

View package

Order this hardware only

Evaluation board

BQ25713EVM-017 — BQ25713 I2C NVDC Buck Boost Charger Evaluation Module

Not available on TI.com

TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star

= Top documentation selected by TI

No results found. Please clear your search and try again.

View all 2

	Type	Title		Date
*	EVM User's guide	bq2571x Evaluation Module User's Guide (Rev. B)		09 Oct 2018
	Certificate	BQ25713EVM-017 EU Declaration of Conformity (DoC)		02 Jan 2019

BQ25713EVM-017

BQ25713 I2C NVDC Buck Boost Charger Evaluation Module

BQ25713EVM-017

Overview

Features

Not Included

Battery charger ICs

Order & start development

Explore packages of hardware, software and documentation

Evaluate the buck-boost charger controller BQ25713 compatiable with USB and Type-C and power delivery

BQ25713EVM-017 — BQ25713 I2C NVDC Buck Boost Charger Evaluation Module

EV2400 — USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation Module

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Products

Battery monitors & balancers

Battery charger ICs

Battery fuel gauges

Battery protectors

Hardware development

Evaluation board

Documentation

Release Infomation

What's new

Documentation & related resources

Evaluate the buck-boost charger controller BQ25713 compatiable with USB and Type-C and power delivery

Order this hardware only

BQ25713EVM-017 — BQ25713 I2C NVDC Buck Boost Charger Evaluation Module

Technical documentation

Related design resources

Hardware development

EVALUATION BOARD

Software development

APPLICATION SOFTWARE & FRAMEWORK

Support & training

TI E2E™ forums with technical support from TI engineers

Video series

Videos

Download options

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Products

Battery monitors & balancers

Battery charger ICs

Battery fuel gauges

Battery protectors

Hardware development

Evaluation board

Documentation

Release Infomation

What's new

Supported products & hardware

Products

Battery monitors & balancers

Battery charger ICs

Battery fuel gauges

Battery protectors

Hardware development

Evaluation board