BQ25150EVM

Low IQ advanced powerpath charge management solution for wearables and hearables evaluation module

BQ25150EVM

Order now

Overview

The bq25150EVM evaluation module is an integrated battery charge management IC that integrates the most common functions for wearables devices: Linear charger, regulated output, load switch, manual reset with timer, ADC, ship mode and advanced power path. The low quiescent current during operation and shutdown enables maximum battery life. The device supports charge currents from 1.25 mA to 500 mA. The input current limit, charge current, LDO output voltage, and other parameters are programmable through the I2C interface. The device also has a multi-point ADC to measure different parameters on the charger and also includes an optional ADC input. The battery is charged using a standard Li-Ion charge profile with three phases: precharge, constant current and constant voltage.

Features

Configurable battery charger
Multi Point ADC to measure 7 channels
Advanced power path to power system through either battery or adapter
Programmable hard and soft reset
0.5% accurate battery voltage regulation
Wake timers for push button

Battery charger ICs

BQ25150 — I2C controlled 500-mA linear battery charger with Power Path, Low Iq, integrated LDO and 16-bit ADC

BQ25155 — 500-mA 1-cell linear charger with 10-nA IQ, power path, regulated system voltage, 16-bit ADC and LDO

Download View video with transcript Video

Order & start development

Explore packages of hardware, software and documentation

Evaluate BQ25150 highly integrated linear battery charger for wearable and hearable applications

close

Start evaluating with the required hardware, communication interface and software that you will need to evaluate the BQ25150EVM.

Evaluation board

BQ25150EVM — Low IQ advanced powerpath charge management solution for wearables and hearables evaluation module

Required

Why do I need this?

This board allows you to start evaluating the BQ25150.

Not available on TI.com

Interface adapter

EV2400 — USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation Module

Required

Why do I need this?

This is a communication interface board that you will need to configure the BQ25150 registers from a windows PC.

Not available on TI.com

Application software & framework

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Required

Why do I need this?

This GUI software allows you to set the registers for your device.

Supported products & hardware

Download options

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

close

Latest version

Version: 1.3.127

Release date: 01 Jul 2024

open-in-new

View all versions

download

GASGAUGECHEM-SW Latest chemistry database for Battery Management Studio — 0 K

Download Chemistry zip file for bqStudio & use bqStudio Help menu to import the latest chemistries.

lock

BatteryManagementStudio-1.3.127_Build1-windows-installer.exe — 208621 K

Checksum

Products

Battery monitors & balancers

BQ76905 — Low-power monitor and protector for 2S to 5S with high accuracy cell voltage measurement

BQ76907 — Low-power monitor and protector for 2S to 7S with high accuracy cell voltage measurement

BQ769142 — 3-s to 14-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4 battery

BQ76942 — 3-series to 10-series multicell battery monitor and protector

BQ76952 — 3-s to 16-s high-accuracy battery monitor and protector for Li-ion, Li-polymer and LiFePO4

BQ76972 — 3s-to-16s high-accuracy battery monitor and protector for Li-ion, Li-poly and LiFePO4

Battery charger ICs

BQ24800 — SMBus 1-4 cell Buck battery charge controller to support hybrid power boost and battery boost mode

BQ25720 — SMBus 1- to 4-cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG

BQ25723 — I²C 1-4 cell NVDC buck-boost battery charge controller with power path and USB-C® PD OTG

BQ25731 — I2C 1-5 cell NVDC buck-boost battery charge controller with USB type-C PD support

BQ25756 — Stand-alone or I²C-controlled 70-V bidirectional buck-boost charge controller with MPPT

BQ25790 — Integrated, NVDC, 5-A 1-cell to 4-cell switch-mode buck-boost battery charger

BQ25792 — I2C controlled, 5-A, 1-4 cell buck-boost charger with dual-input selector and USB PD 3.0 OTG output

Battery fuel gauges

BQ27220 — Single cell pack/system-side CEDV battery fuel (gas) gauge w/pre-programmed chemistry profiles

BQ27320 — Single cell pack/System-side CEDV battery fuel (gas) gauge

BQ27425-G1 — System-side Impedance Track™; fuel gauge with direct battery connection | gas gauge battery

BQ27425-G2A — System-side Impedance Track™; fuel gauge for LiCoO2 battery

BQ27425-G2B — System-side Impedance Track™; fuel gauge LiMn2O4 battery

BQ27427 — Single-cell battery fuel gauge with pre-programmed chemistry and integrated sense resistor

BQ27520-G4 — System side Impedance Track™ fuel gauge with integrated LDO.

BQ27530-G1 — System-side Impedance-Track fuel (gas) gauge with direct battery connection

BQ27531-G1 — Battery management unit Impedance Track™ fuel (gas) gauge for bq2419x charger controller

BQ27532-G1 — Battery management unit Impedance Track™ fuel gauge for bq2425x charger

BQ27545-G1 — Single cell, pack side, Impedance Track™ fuel gauge

BQ27546-G1 — Single cell Impedance Track™ pack side fuel gauge with DSBGA package

BQ27621-G1 — System-side fuel gauge with Dynamic Voltage Correlation, battery gas gauge

BQ27741-G1 — Pack-side Impedance Track™(tm) fuel (gas) gauge with integrated protector

BQ27742-G1 — Single cell Li-ion battery fuel gauge with integrated protection | battery gas gauge

BQ27Z561 — Impedance Track™ integrated circuit gas gauge solution for 1-series

BQ27Z746 — Pack-side, single-cell Impedance Track™ technology fuel gauge with integrated protector

BQ28Z610 — Battery fuel gauge with integrated protector for 1-2 series packs

BQ34110 — Multi-chemistry high-cell Count battery fuel gauge with integrated rarely discharged module

BQ34210-Q1 — Automotive Qualified Single cell system-side CEDV fuel gauge

BQ34Z100-G1 — Multi-chemistry Impedance Track™ standalone fuel gauge | battery gas gauge

BQ35100 — Battery fuel gauge for non-rechargeable batteries (lithium primary) and end-of-service monitor

BQ4050 — 1-4 series CEDV battery fuel (gas) gauge

BQ40Z50 — 1-4 series Li-ion battery pack manager | battery fuel (gas) gauge

BQ40Z50-R1 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 1.0

BQ40Z50-R2 — 1-4 series Li-ion battery pack manager supporting Turbo Mode 2.0

BQ40Z60 — Complete multi-cell battery manager | battery fuel (gas) gauge

BQ40Z80 — 2-s to 6-s battery pack manager with Impedance Track™ gas gauging

BQ78350 — Companion CEDV Fuel Gauge Battery Management Controller for bq76940 Monitor Family

BQ78350-R1 — CEDV li-ion gas gauge and battery management controller

BQ78Z100 — Impedance Track™ battery fuel (gas) gauge for 1-series to 2-series

Battery protectors

BQ77307 — Low-power protector for 2S to 7S with high accuracy cell voltage measurement

Hardware development

Evaluation board

MKST-3P-ALT-EV2300 — MKS Technology alternative for EV2300 communications transceiver

Documentation

open-in-new

Documentation Overview

Battery Management Studio (bqStudio) Documentation

Release Infomation

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including support for real-time watching, graphing, and logging, an easy interface to send commands, direct low-level communication and I/O, as well as automated and guided support for configuration, calibration, performing a learning cycle, and generating useful files for taking the device to production.

This version of bqStudio supports the latest chemistry updates.
Operating systems: Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit)

Older products such as bq20xxx and bq30xxx are not supported in bqStudio. Download the specific evaluation software from the appropriate product page.

Requires: EV2400 or MKST-3P-ALT-EV2300

What's new

See Release notes

Documentation & related resources

EVM User's guide

BQ2515xEVM User's Guide

Software development

BQ25150 Setup Guide Tool

Application note

BQ2515x Setup Guide

HARDWARE AND SOFTWARE PACKAGE

Evaluate BQ25150 highly integrated linear battery charger for wearable and hearable applications

View package

Order this hardware only

Evaluation board

BQ25150EVM — Low IQ advanced powerpath charge management solution for wearables and hearables evaluation module

Not available on TI.com

TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star

= Top documentation selected by TI

No results found. Please clear your search and try again.

View all 7

	Type	Title		Date
*	EVM User's guide	BQ2515xEVM User's Guide (Rev. A)		13 Jun 2019
	Data sheet	BQ25155 I2C Controlled 1-Cell 500-mA Linear Battery Charger With 10-nA Ship Mode, Power Path With Regulated System (PMID) Voltage, ADC, and LDO datasheet (Rev. B)	PDF \| HTML	01 Aug 2023
	Data sheet	BQ25150 I2C Controlled 1-Cell 500-mA Linear Charger with 10-nA Ship Mode, Advanced Power Path Management and Control, ADC, and LDO datasheet (Rev. C)	PDF \| HTML	26 Apr 2023
	Application note	Battery Discharge Implementation in Warm or Hot Temperatures		02 Jul 2019
	Application note	BQ2515x Setup Guide		18 Jun 2019
	Certificate	BQ25150EVM EU Declaration of Conformity (DoC)		02 Jan 2019
	User guide	Small Form Factor Design for BQ25150		24 Jul 2018

Related design resources

Hardware development

INTERFACE ADAPTER

EV2400 — USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation Module

BQ25150EVM

Low IQ advanced powerpath charge management solution for wearables and hearables evaluation module

BQ25150EVM

Overview

Features

Battery charger ICs

Order & start development

Explore packages of hardware, software and documentation

Evaluate BQ25150 highly integrated linear battery charger for wearable and hearable applications

BQ25150EVM — Low IQ advanced powerpath charge management solution for wearables and hearables evaluation module

EV2400 — USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation Module

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Products

Battery monitors & balancers

Battery charger ICs

Battery fuel gauges

Battery protectors

Hardware development

Evaluation board

Documentation

Release Infomation

What's new

Documentation & related resources

Evaluate BQ25150 highly integrated linear battery charger for wearable and hearable applications

Order this hardware only

BQ25150EVM — Low IQ advanced powerpath charge management solution for wearables and hearables evaluation module

Technical documentation

Related design resources

Hardware development

INTERFACE ADAPTER

Support & training

TI E2E™ forums with technical support from TI engineers

Video series

Videos

Download options

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – Beta version downloads

Products

Battery monitors & balancers

Battery charger ICs

Battery fuel gauges

Battery protectors

Hardware development

Evaluation board

Documentation

Release Infomation

What's new

Supported products & hardware

Products

Battery monitors & balancers

Battery charger ICs

Battery fuel gauges

Battery protectors

Hardware development

Evaluation board