HDC3120
- Relative humidity (RH) sensor:
- Operating range: 0% to 100%RH
- Accuracy: ±0.5%RH typical
- Long-term drift: 0.19%RH/yr
- Ratiometric Analog Output to represent RH
- Temperature sensor:
- Operating range: –40°C to 125°C
- Accuracy: ±0.2°C typical
- Ratiometric Analog Output to represent Temperature
- NIST traceability: relative humidity & temperature
- Output Short Circuit Protection
- Integrated Reset pin for offset calibration
- Integrated heater
- Low power: 230µA typical active current
- Supply voltage: 1.62V to 5.50V
The HDC3120 is an integrated, capacitive based relative humidity (RH) and temperature sensor where the relative humidity and temperature sensor results are represented as ratiometric analog output. Conversion of signals to the analog domain provides a robust solution in applications requiring signal transmission over wire or other distance-based use cases. The device provides high accuracy measurements over a wide supply range (1.62V – 5.5V) and low power consumption while maintaining less than 0.19% long term drift per year. The HDC3120 is available in a compact 2.5mm × 2.5mm × 0.8mm WSON 8-pin package. Both the temperature and humidity sensors are 100% tested and calibrated on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 standards.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | HDC3120 High-Accuracy (0.5%RH, 0.2°C) Analog Humidity and Temperature Sensor, With Low Long-Term Drift (0.19%RH/yr), and 4s RH% Response データシート | PDF | HTML | 2025年 2月 14日 | ||
EVM ユーザー ガイド (英語) | HDC3120 Evaluation Module User's Guide | PDF | HTML | 2024年 11月 14日 |
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
HDC3120EVM — HDC3120 evaluation module
The HDC3120EVM is an analog evaluation module (EVM) designed for users to evaluate the performance of the HDC3120: a versatile, high accuracy ratiometric analog humidity and temperature sensor. This EVM provides users the flexibility and customizability required for implementing the sensor in the (...)
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
WSON (DEF) | 8 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点