ホーム データ・コンバータ A/D コンバータ (ADC) 高精度 ADC
ホーム
データ・コンバータ
A/D コンバータ (ADC)
高精度 ADC

ADS8284

新規設計での使用を推奨しません

18 ビット、1MSPS、4 チャネル、擬似バイポーラ、差動 ADC、ADC ドライバ用オペアンプ内蔵

ご注文はこちら
データシート
ADS8284 は新規設計での使用を推奨しません
これまでにご購入されたお客様をサポートする目的でこの製品を引き続き生産しています。新規設計では代替品をご検討ください。
open-in-new 代替品と比較
比較対象デバイスと類似の機能
ADS8382 アクティブ リファレンス搭載、疑似バイポーラ、完全差動入力、18 ビット、600kSPS、シリアル ADC Lower sampling rate (600 kSPS)

ADS8284

新規設計での使用を推奨しません
データシート ご注文はこちら

製品詳細

Resolution (Bits) 18 Sample rate (max) (ksps) 1000 Number of input channels 4 Interface type Parallel Architecture SAR Rating Catalog Reference mode External, Internal Operating temperature range (°C) -40 to 85 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 SNR (dB) 97.5 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
Resolution (Bits) 18 Sample rate (max) (ksps) 1000 Number of input channels 4 Interface type Parallel Architecture SAR Rating Catalog Reference mode External, Internal Operating temperature range (°C) -40 to 85 Analog supply (min) (V) 4.75 Analog supply voltage (max) (V) 5.25 SNR (dB) 97.5 Digital supply (min) (V) 2.7 Digital supply (max) (V) 5.25
VQFN (RGC) 64 81 mm² 9 x 9
  • 1.0-MHz Sample Rate, Zero Latency at Full Speed
  • 18-Bit Resolution
  • Supports Pseudo-Bipolar Differential Input Range:
    -4 V to +4 V with 2-V Common-Mode
  • Built-In Four Channel, Differential Ended Multiplexer;
    with Channel Count Selection and Auto/Manual Mode
  • On-Board Differential ADC Driver (OPA)
  • Buffered Reference Output to Level Shift Bipolar
    ±4-V Input with External Resistance Divider
  • Reference/2 Output to Set Common-Mode for External
    Signal Conditioner
  • 18-/16-/8-Bit Parallel Interface
  • SNR: 98.4dB Typ at 2-kHz I/P
  • THD: –119dB Typ at 2-kHz I/P
  • Power Dissipation: 331.25 mW at 1 MSPS Including
    ADC Driver
  • Internal Reference
  • Internal Reference Buffer
  • 64-Pin QFN Package
  • 1.0-MHz Sample Rate, Zero Latency at Full Speed
  • 18-Bit Resolution
  • Supports Pseudo-Bipolar Differential Input Range:
    -4 V to +4 V with 2-V Common-Mode
  • Built-In Four Channel, Differential Ended Multiplexer;
    with Channel Count Selection and Auto/Manual Mode
  • On-Board Differential ADC Driver (OPA)
  • Buffered Reference Output to Level Shift Bipolar
    ±4-V Input with External Resistance Divider
  • Reference/2 Output to Set Common-Mode for External
    Signal Conditioner
  • 18-/16-/8-Bit Parallel Interface
  • SNR: 98.4dB Typ at 2-kHz I/P
  • THD: –119dB Typ at 2-kHz I/P
  • Power Dissipation: 331.25 mW at 1 MSPS Including
    ADC Driver
  • Internal Reference
  • Internal Reference Buffer
  • 64-Pin QFN Package

The ADS8284 is a high-performance analog system-on-chip (SoC) device with an 18-bit, 1-MSPS A/D converter, 4-V internal reference, an on-chip ADC driver (OPA), and a 4-channel differential multiplexer. The channel count of the multiplexer and auto/manual scan modes of the device are user selectable.

The ADC driver is designed to leverage the very high noise performance of the differential ADC at optimum power usage levels.

The ADS8284 outputs a buffered reference signal for level shifting of a ±4-V bipolar signal with an external resistance divider. A Vref/2 output signal is available to set the common-mode of a signal conditioning circuit. The device also includes an 18-/16-/8-bit parallel interface.

The ADS8284 is available in a 9 mm × 9 mm, 64-pin QFN package and is characterized from -40°C to 85°C.

For all available packages, see the orderable addendum at the end of the data sheet.

The ADS8284 is a high-performance analog system-on-chip (SoC) device with an 18-bit, 1-MSPS A/D converter, 4-V internal reference, an on-chip ADC driver (OPA), and a 4-channel differential multiplexer. The channel count of the multiplexer and auto/manual scan modes of the device are user selectable.

The ADC driver is designed to leverage the very high noise performance of the differential ADC at optimum power usage levels.

The ADS8284 outputs a buffered reference signal for level shifting of a ±4-V bipolar signal with an external resistance divider. A Vref/2 output signal is available to set the common-mode of a signal conditioning circuit. The device also includes an 18-/16-/8-bit parallel interface.

The ADS8284 is available in a 9 mm × 9 mm, 64-pin QFN package and is characterized from -40°C to 85°C.

For all available packages, see the orderable addendum at the end of the data sheet.
filter その他の 高精度 ADC を検索
ダウンロード

技術資料

star =TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
1 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート 18-Bit, 1-MSPS, Pseudo-Bipolar Differential SAR ADC with On-Chip ADC Driver (OP データシート (Rev. A) 2014年 4月 23日

購入と品質

記載されている情報：
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL 定格 / ピーク リフロー
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
記載されている情報：
  • ファブの拠点
  • 組み立てを実施した拠点