Home Power management DDR memory power ICs
Home
Power management
DDR memory power ICs

TPS65296

ACTIVE

4.5-V to 18-V VIN complete LPDDR4 and LPDDR4X memory power solution

Order now
Data sheet

TPS65296

ACTIVE
Data sheet Order now

Product details

DDR memory type LPDDR4, LPDDR4X Control mode D-CAP3 Iout VDDQ (max) (A) 8 Iout VTT (max) (A) 1.5 Iq (typ) (mA) 0.15 Output VDDQ, VREF, VTT Vin (min) (V) 4.5 Vin (max) (V) 18 Features Complete Solution, Eco Mode, S3/S5 Support Rating Catalog Operating temperature range (°C) -40 to 125 Regulator type Step-Down Module Vin bias (max) (V) 16 Vin bias (min) (V) 4.5 Vout VTT (min) (V) 0.6
DDR memory type LPDDR4, LPDDR4X Control mode D-CAP3 Iout VDDQ (max) (A) 8 Iout VTT (max) (A) 1.5 Iq (typ) (mA) 0.15 Output VDDQ, VREF, VTT Vin (min) (V) 4.5 Vin (max) (V) 18 Features Complete Solution, Eco Mode, S3/S5 Support Rating Catalog Operating temperature range (°C) -40 to 125 Regulator type Step-Down Module Vin bias (max) (V) 16 Vin bias (min) (V) 4.5 Vout VTT (min) (V) 0.6
VQFN-HR (RJE) 18 9 mm² 3 x 3
  • Synchronous buck converter (VDD2)
    • Input voltage range: 4.5 V to 18 V
    • Output voltage fixed at 1.1 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 8 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 22-mΩ / 8.6-mΩ RDS(on) internal power switch
    • 600-kHz switching frequency
    • Internal soft start: 1.6 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV/UV protections
  • Synchronous buck converter (VDD1)
    • Input voltage range: 3 V to 5.5 V
    • Output voltage fixed at 1.8 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 1 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 150-mΩ /120-mΩ RDS(on) internal power switch
    • 580-kHz switching frequency
    • Internal soft start: 1 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV/UV protections
  • 1.5-A LDO (VDDQ)
    • 1.5-A continual output current
    • Requires only 10 µF of ceramic output capacitor
    • Support high-Z in S3
    • ±30-mV VDDQ output accuracy (DC+AC)
  • Low quiescent current: 150 µA
  • Power good indicator
  • Output discharge function
  • Power up and power down sequencing control
  • Non-latch for OT and UVLO protections
  • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package
  • Synchronous buck converter (VDD2)
    • Input voltage range: 4.5 V to 18 V
    • Output voltage fixed at 1.1 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 8 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 22-mΩ / 8.6-mΩ RDS(on) internal power switch
    • 600-kHz switching frequency
    • Internal soft start: 1.6 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV/UV protections
  • Synchronous buck converter (VDD1)
    • Input voltage range: 3 V to 5.5 V
    • Output voltage fixed at 1.8 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 1 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 150-mΩ /120-mΩ RDS(on) internal power switch
    • 580-kHz switching frequency
    • Internal soft start: 1 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV/UV protections
  • 1.5-A LDO (VDDQ)
    • 1.5-A continual output current
    • Requires only 10 µF of ceramic output capacitor
    • Support high-Z in S3
    • ±30-mV VDDQ output accuracy (DC+AC)
  • Low quiescent current: 150 µA
  • Power good indicator
  • Output discharge function
  • Power up and power down sequencing control
  • Non-latch for OT and UVLO protections
  • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package

The TPS65296 device provides a complete power solution for LPDDR4/LPDDR4X memory system with the lowest total cost and minimum space. It meets the JEDEC standard for LPDDR4/LPDDR4X power-up and power-down sequence requirement. The TPS65296 integrates two synchronous buck converters (VDD1 and VDD2) and a 1.5-A LDO (VDDQ).

The TPS65296 employs D-CAP3™ mode with 600-kHz switching frequency for fast transient, good load/line regulation, and support for ceramic output capacitors without an external compensation circuit.

The TPS65296 provides rich functions as well as good efficiency with internal low Rdson power MOSFETs. It supports flexible power state control, placing VDDQ at high-Z in S3 and discharging VDD1, VDD2, and VDDQ in S4/S5 state. Full protection features include OVP, UVP, OCP, UVLO and thermal shutdown protection. The part is available in a thermally enhanced 18-pin HotRod™ VQFN package and is designed to operate under the –40°C to 125°C junction temperature range.

The TPS65296 device provides a complete power solution for LPDDR4/LPDDR4X memory system with the lowest total cost and minimum space. It meets the JEDEC standard for LPDDR4/LPDDR4X power-up and power-down sequence requirement. The TPS65296 integrates two synchronous buck converters (VDD1 and VDD2) and a 1.5-A LDO (VDDQ).

The TPS65296 employs D-CAP3™ mode with 600-kHz switching frequency for fast transient, good load/line regulation, and support for ceramic output capacitors without an external compensation circuit.

The TPS65296 provides rich functions as well as good efficiency with internal low Rdson power MOSFETs. It supports flexible power state control, placing VDDQ at high-Z in S3 and discharging VDD1, VDD2, and VDDQ in S4/S5 state. Full protection features include OVP, UVP, OCP, UVLO and thermal shutdown protection. The part is available in a thermally enhanced 18-pin HotRod™ VQFN package and is designed to operate under the –40°C to 125°C junction temperature range.
filter Find other DDR memory power ICs
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet TPS65296-Complete LPDDR4/LPDDR4X Memory Power Solution datasheet (Rev. A) PDF | HTML 07 Oct 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS65295EVM-079 — 8-A buck converter evaluation module

The TPS65295 evaluation module (EMV) is used to evaluate the TPS65295 device. The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The (...)
User guide: PDF
Not available on TI.com
Simulation model

TPS65296 TINA TI Reference Design

SLUM697.ZIP (471 KB) - TINA-TI Reference Design
Download
Package Pins CAD symbols, footprints & 3D models
VQFN-HR (RJE) 18 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos