Home Power management DDR memory power ICs
Home
Power management
DDR memory power ICs

TPS65295

ACTIVE

4.5-V to 18-V VIN complete DDR4 memory power solution

Order now
Data sheet

TPS65295

ACTIVE
Data sheet Order now

Product details

DDR memory type DDR4 Control mode D-CAP3 Iout VDDQ (max) (A) 8 Iout VTT (max) (A) 1 Iq (typ) (mA) 0.15 Output VDDQ, VREF, VTT Vin (min) (V) 4.5 Vin (max) (V) 18 Features Complete Solution Rating Catalog Operating temperature range (°C) -40 to 125 Regulator type Step-Down Converter Vin bias (max) (V) 16 Vin bias (min) (V) 4.5 Vout VTT (min) (V) 0.6
DDR memory type DDR4 Control mode D-CAP3 Iout VDDQ (max) (A) 8 Iout VTT (max) (A) 1 Iq (typ) (mA) 0.15 Output VDDQ, VREF, VTT Vin (min) (V) 4.5 Vin (max) (V) 18 Features Complete Solution Rating Catalog Operating temperature range (°C) -40 to 125 Regulator type Step-Down Converter Vin bias (max) (V) 16 Vin bias (min) (V) 4.5 Vout VTT (min) (V) 0.6
VQFN-HR (RJE) 18 9 mm² 3 x 3
  • Synchronous buck converter (VDDQ)
    • Input voltage range: 4.5 V to 18 V
    • Output voltage fixed at 1.2 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 8 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 22-mΩ and 8.6-mΩ RDS(on) internal power switch
    • 600-kHz switching frequency
    • Internal soft start: 1.6 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • Synchronous buck converter (VPP)
    • Input voltage range: 3 V to 5.5 V
    • Output voltage fixed at 2.5 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 1 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 150-mΩ and 120-mΩ RDS(on) internal power switch
    • 580-kHz switching frequency
    • Internal soft start: 1 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • 1-A LDO (VTT)
    • 1-A continual sink and source current
    • Requires only 10 µF of ceramic output capacitor
    • Support high-z in S3
    • ±30-mV VTT output accuracy (DC+AC)
  • Buffered reference (VTTREF)
    • Buffered, low noise, ±10-mA capability
    • 0.8% output accuracy
  • Low quiescent current: 150 µA
  • Power good indicator
  • Output discharge function
  • Power up and power down sequencing control
  • Non-latch for OT and UVLO protections
  • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package
  • Synchronous buck converter (VDDQ)
    • Input voltage range: 4.5 V to 18 V
    • Output voltage fixed at 1.2 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 8 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 22-mΩ and 8.6-mΩ RDS(on) internal power switch
    • 600-kHz switching frequency
    • Internal soft start: 1.6 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • Synchronous buck converter (VPP)
    • Input voltage range: 3 V to 5.5 V
    • Output voltage fixed at 2.5 V
    • D-CAP3™ mode control for fast transient response
    • Continual output current: 1 A
    • Advanced Eco-mode™ pulse skip
    • Integrated 150-mΩ and 120-mΩ RDS(on) internal power switch
    • 580-kHz switching frequency
    • Internal soft start: 1 ms
    • Cycle-by-cycle overcurrent protection
    • Latched output OV and UV protections
  • 1-A LDO (VTT)
    • 1-A continual sink and source current
    • Requires only 10 µF of ceramic output capacitor
    • Support high-z in S3
    • ±30-mV VTT output accuracy (DC+AC)
  • Buffered reference (VTTREF)
    • Buffered, low noise, ±10-mA capability
    • 0.8% output accuracy
  • Low quiescent current: 150 µA
  • Power good indicator
  • Output discharge function
  • Power up and power down sequencing control
  • Non-latch for OT and UVLO protections
  • 18-pin 3.0-mm × 3.0-mm HotRod™ VQFN package

The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The TPS65295 integrates two synchronous buck converters (VPP and VDDQ) and a 1-A sink and source tracking LDO (VTT) and a buffered low noise reference (VTTREF). The TPS65295 employs D-CAP3™ mode coupled with 600-kHz switching frequency for ease-of-use, fast transient, and support for ceramic output capacitors without an external compensation circuit.

The VTTREF tracks ½ VDDQ within excellent 0.8% accuracy. The VTT, which provides both 1-A sink and source continual current capabilities, requires only 10-µF of ceramic output capacitor.

The TPS65295 provides rich functions as well as excellent power supply performance. It supports flexible power state control, placing VTT at high-Z in S3 and discharging VDDQ, VTT, and VTTREF in S4/S5 state. OVP, UVP, OCP, UVLO and thermal shutdown protections are also available. The part is available in a thermally enhanced 18-pin HotRod™ VQFN package and is designed to operate under the –40°C to 125°C junction temperature range.

The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The TPS65295 integrates two synchronous buck converters (VPP and VDDQ) and a 1-A sink and source tracking LDO (VTT) and a buffered low noise reference (VTTREF). The TPS65295 employs D-CAP3™ mode coupled with 600-kHz switching frequency for ease-of-use, fast transient, and support for ceramic output capacitors without an external compensation circuit.

The VTTREF tracks ½ VDDQ within excellent 0.8% accuracy. The VTT, which provides both 1-A sink and source continual current capabilities, requires only 10-µF of ceramic output capacitor.

The TPS65295 provides rich functions as well as excellent power supply performance. It supports flexible power state control, placing VTT at high-Z in S3 and discharging VDDQ, VTT, and VTTREF in S4/S5 state. OVP, UVP, OCP, UVLO and thermal shutdown protections are also available. The part is available in a thermally enhanced 18-pin HotRod™ VQFN package and is designed to operate under the –40°C to 125°C junction temperature range.
filter Find other DDR memory power ICs
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TPS65295 complete DDR4 memory power solution datasheet PDF | HTML 22 Feb 2019
Application note Non-Isolated Point-of-Load Solutions for Tiger Lake in PC Applications (Rev. B) PDF | HTML 29 Apr 2021
EVM User's guide TPS65295EVM-079 user's guide 04 Dec 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS65295EVM-079 — 8-A buck converter evaluation module

The TPS65295 evaluation module (EMV) is used to evaluate the TPS65295 device. The TPS65295 device provides a complete power solution for DDR4 memory system with the lowest total cost and minimum space. It meets the JEDEC standard for DDR4 power-up and power-down sequence requirement. The (...)
User guide: PDF
Not available on TI.com
Simulation model

TPS65295 PSpice Transient Model

SLUM678.ZIP (114 KB) - PSpice Model
Download
Package Pins CAD symbols, footprints & 3D models
VQFN-HR (RJE) 18 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos