TPS62261

Name: TPS62261
Brand: TI
SKU: TPS62261
Price: 0.487 USD

ACTIVE

2.25MHz 600mA Step-Down Converter in 2x2mm SON/TSOT23 Package

Order now

Data sheet

document-pdfAcrobat TPS6226x 2.25-MHz 600-mA Step Down Converter in 2 x 2 WSON and SOT Package datasheet (Rev. E) PDF | HTML

A newer version of this product is available

open-in-new

Compare alternates

Same functionality with different pin-out to the compared device

TPS628510

ACTIVE

2.7-V to 6-V, 0.5-A, fixed-frequency, step-down converter in SOT583 package Smaller solution size in SOT583 package

TPS62261

ACTIVE

Data sheet

Order now

Product details

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

0.6

Vin (min) (V)

2

Vin (max) (V)

6

Switching frequency (min) (kHz)

2000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

1.8

Vout (max) (V)

1.8

Iq (typ) (µA)

15

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

0.6

Vin (min) (V)

2

Vin (max) (V)

6

Switching frequency (min) (kHz)

2000

Switching frequency (max) (kHz)

2500

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

1.8

Vout (max) (V)

1.8

Iq (typ) (µA)

15

Duty cycle (max) (%)

100

WSON (DRV)

6

4 mm² 2 x 2

High Efficiency Step-Down Converter
Output Current up to 600 mA
V_IN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range
2.25-MHz Fixed Frequency Operation
Power Save Mode at Light Load Currents
Output Voltage Accuracy in PWM Mode ±1.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Voltage Positioning at Light Loads
Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package
Allows <1-mm Solution Height
APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

High Efficiency Step-Down Converter
Output Current up to 600 mA
V_IN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range
2.25-MHz Fixed Frequency Operation
Power Save Mode at Light Load Currents
Output Voltage Accuracy in PWM Mode ±1.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Voltage Positioning at Light Loads
Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package
Allows <1-mm Solution Height
APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

filter

Find other AC/DC & DC/DC converters (integrated FET)

Download View video with transcript Video

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 12

	Type	Title		Date
*	Data sheet	TPS6226x 2.25-MHz 600-mA Step Down Converter in 2 x 2 WSON and SOT Package datasheet (Rev. E)	PDF \| HTML	30 Jul 2015
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 Dec 2023
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 Dec 2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22 Jun 2018
	Application note	Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B)		29 Nov 2017
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		24 Oct 2017
	Application note	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		15 Jun 2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24 Oct 2016
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		17 Aug 2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		29 Jan 2015
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		13 Jan 2012
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17 Jun 2011