Home Audio Audio amplifiers Speaker amps
Home
Audio
Audio amplifiers
Speaker amps
NEW

TAS6511-Q1

PREVIEW

Automotive, 45W, 2MHz, 1-channel digital input Class-D audio amplifier with current sense

Order now
Data sheet

TAS6511-Q1

PREVIEW
Data sheet Order now

Product details

Audio input type Digital Input Architecture Class-D Speaker channels (max) Mono Rating Automotive Power stage supply (max) (V) 18 Power stage supply (min) (V) 4.5 Load (min) (Ω) 1 Output power (W) 45 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 65 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 4.5 Analog supply voltage (max) (V) 18 Sampling rate (max) (kHz) 192 PSRR (dB) 80 Operating temperature range (°C) -40 to 125
Audio input type Digital Input Architecture Class-D Speaker channels (max) Mono Rating Automotive Power stage supply (max) (V) 18 Power stage supply (min) (V) 4.5 Load (min) (Ω) 1 Output power (W) 45 THD + N at 1 kHz (%) 0.02 Iq (typ) (mA) 65 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 4.5 Analog supply voltage (max) (V) 18 Sampling rate (max) (kHz) 192 PSRR (dB) 80 Operating temperature range (°C) -40 to 125
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5-V to 18-V supply voltage, 40-V load dump
    • Support for 1.8-V and 3.3-V I/O’s
    • I2C control with 8 address options
    • <0.5-W idle power loss at 14.4 V, <5-uA max PVDD shutdown loss
  • Output current sensing via I2S or TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions while playing audio
    • Open load, Shorted load, Short-to-power, Short-to-ground detection
  • Integrated DSP processing
    • Thermal monitoring and foldback
    • PVDD monitoring and foldback
    • Clip detection
    • Low Latency Path, >70% reduced signal delay at 48 kHz
  • DC and AC Standby load diagnostics
  • Audio inputs
    • I2S and TDM support up to TDM16
    • Input sample rates: 16, 32, 44.1, 48, 96, 192 kHz
  • Audio outputs
    • 384-kHz to 2-MHz configurable output switching frequency
    • Up to 7-A channel output current
    • 30 W (14.4 V, 4 Ω, 10% THD)
    • 50 W (14.4 V, 2 Ω, 10% THD)
  • Audio Performance
    • THD+N <0.01% (4 Ω, 1 W, 1 kHz)
    • 109 dB SNR
    • Output noise: 35 µVRMS at 14.4 V, A-weighting
  • Protection
    • Output short protection
    • Speaker GuardTM Pro power limiter
    • Configurable overtemperature warning and shutdown
    • I2C temperature and supply voltage readout
    • DC offset, undervoltage and overvoltage
  • Easily meet CISPR25-L5 EMC specification
    • Advanced spread-spectrum
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • General operation
    • 4.5-V to 18-V supply voltage, 40-V load dump
    • Support for 1.8-V and 3.3-V I/O’s
    • I2C control with 8 address options
    • <0.5-W idle power loss at 14.4 V, <5-uA max PVDD shutdown loss
  • Output current sensing via I2S or TDM
    • No need for external circuitry
  • Real-time load diagnostics
    • Monitor output conditions while playing audio
    • Open load, Shorted load, Short-to-power, Short-to-ground detection
  • Integrated DSP processing
    • Thermal monitoring and foldback
    • PVDD monitoring and foldback
    • Clip detection
    • Low Latency Path, >70% reduced signal delay at 48 kHz
  • DC and AC Standby load diagnostics
  • Audio inputs
    • I2S and TDM support up to TDM16
    • Input sample rates: 16, 32, 44.1, 48, 96, 192 kHz
  • Audio outputs
    • 384-kHz to 2-MHz configurable output switching frequency
    • Up to 7-A channel output current
    • 30 W (14.4 V, 4 Ω, 10% THD)
    • 50 W (14.4 V, 2 Ω, 10% THD)
  • Audio Performance
    • THD+N <0.01% (4 Ω, 1 W, 1 kHz)
    • 109 dB SNR
    • Output noise: 35 µVRMS at 14.4 V, A-weighting
  • Protection
    • Output short protection
    • Speaker GuardTM Pro power limiter
    • Configurable overtemperature warning and shutdown
    • I2C temperature and supply voltage readout
    • DC offset, undervoltage and overvoltage
  • Easily meet CISPR25-L5 EMC specification
    • Advanced spread-spectrum

The TAS6511-Q1 is a mono-channel, digital-input, Class-D audio amplifier that supports 2 MHz switching frequency enabling a cost and size-optimized single-channel solution. The device operates from 4.5 V to 18 V and delivers up to 30 W (14.4 V, 4 Ω, 10% THD+N) and up to 50 W (14.4 V, 2 Ω, 10% THD+N). The device integrates DC and AC load diagnostics to determine the status of the connected load before enabling the output stage. Additionally, the device can monitor the output load condition while in PLAY mode with or without audio using real-time load diagnostics which operates independently from the host and audio input.

TAS6511-Q1 can monitor the output current, PVDD voltage, and temperature of the device and can report this data through TDM or I2S. The integrated DSP of the TAS6511-Q1 enables advanced protection features such as PVDD foldback, thermal foldback, and Speaker Guard™ Pro power limiter. The DSP also enables an additional low-latency signal path, providing up to 70% faster signal processing at 48 kHz for time-sensitive Active Noise Cancellation (ANC) and Road Noise Cancellation (RNC) applications.

The device is available in a small pad-down TSSOP package.

The TAS6511-Q1 is a mono-channel, digital-input, Class-D audio amplifier that supports 2 MHz switching frequency enabling a cost and size-optimized single-channel solution. The device operates from 4.5 V to 18 V and delivers up to 30 W (14.4 V, 4 Ω, 10% THD+N) and up to 50 W (14.4 V, 2 Ω, 10% THD+N). The device integrates DC and AC load diagnostics to determine the status of the connected load before enabling the output stage. Additionally, the device can monitor the output load condition while in PLAY mode with or without audio using real-time load diagnostics which operates independently from the host and audio input.

TAS6511-Q1 can monitor the output current, PVDD voltage, and temperature of the device and can report this data through TDM or I2S. The integrated DSP of the TAS6511-Q1 enables advanced protection features such as PVDD foldback, thermal foldback, and Speaker Guard™ Pro power limiter. The DSP also enables an additional low-latency signal path, providing up to 70% faster signal processing at 48 kHz for time-sensitive Active Noise Cancellation (ANC) and Road Noise Cancellation (RNC) applications.

The device is available in a small pad-down TSSOP package.

filter Find other Speaker amps
Download View video with transcript Video
Request more information

The full data sheet, PurePathâ„¢ Console 3, TAS6511-Q1 GUI and other design resources are available. Request now

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet TAS6511-Q1 - 50-W, 2-MHz Digital Input 1-Channel Automotive Heatsink-Free Class-D Audio Amplifier with Current Sense and Real-time Load Diagnostics datasheet PDF | HTML 12 Oct 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TAS6511Q1EVM — TAS6511-Q1 evaluation module

The TAS6511-Q1 evaluation module (EVM) showcases all the features of the TAS6511-Q1 single-channel Class-D amplifier with integrated DSP. The PurePath™ Console 3 graphical user interface (GUI) is used to interface with USB to the EVM. The EVM has optical and coax SPDIF inputs, I2S, TDM and audio (...)
Request
Application software & framework

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.
PurePath Console’s (...)
View Options
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins CAD symbols, footprints & 3D models
HTSSOP (PWP) 28 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos