The LPV801 (single) and LPV802 (dual) comprise a family of ultra-low-power operational amplifiers for sensing applications in battery powered wireless and low power wired equipment. With 8kHz of bandwidth from 320nA of quiescent current, the LPV80x amplifiers minimize power consumption in equipment such as CO detectors, smoke detectors and PIR motion detectors where operational battery-life is critical.
In addition to being ultra-low-power, the LPV80x amplifiers have CMOS input stages with typically femto-amp bias currents. The LPV80x amplifiers also feature a negative-rail sensing input stage and a rail-to-rail output stage that is capable of swinging within millivolts of the rails, maintaining the widest dynamic range possible. EMI protection is designed into the LPV80x in order to reduce system sensitivity to unwanted RF signals from mobile phones, WiFi, radio transmitters and tag readers.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LPV801/LPV802 320 nA Nanopower Operational Amplifiers datasheet (Rev. B) | PDF | HTML | 16 Nov 2016 |
| Application brief | Extend Battery Life and Simplify Calibration in Gas Sensing Applications (Rev. A) | 06 Feb 2018 | ||
| Application note | Nano-Power Battery Monitoring in Personal Electronics | 08 Dec 2017 | ||
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | 28 Mar 2017 | ||
| Application note | LPV801 Micropower Ionization Smoke Detector | 29 Nov 2016 | ||
| Technical article | How to improve IoT designs with a nanopower EMI-tolerant op amp | PDF | HTML | 09 Nov 2016 | |
| Application note | Precision Voltage Offset: When Does it Matter? (Rev. A) | 02 Nov 2016 | ||
| Application note | Comparing EMI Performance of LPV802 with Other Devices in a Gas Sensor App | 18 Oct 2016 |
For additional terms or required resources, click any title below to view the detail page where available.
The amplifier performance development kit (PDK) is an evaluation module (EVM) kit to test common operational amplifier (op amp) parameters and is compatible with most op amps and comparators. The EVM kit offers a main board with several socketed daughtercard options to fit package needs, allowing (...)
Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)
The DIYAMP-EVM is an evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is available in three industry-standard packages (SC70, SOT-23 and SOIC) (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.