The DRV89xx-Q1 is a pin-to-pin compatible family of integrated multi-channel half-bridge drivers with 4 to 12 half-bridges. The device family features low on-state resistance (RDS(ON)) for improved thermal performance during high-current operation.
These devices can drive brushed-DC (BDC) motors or stepper motors in independent, sequential, or parallel mode. The half-bridges are fully controllable to achieve a forward, reverse, coasting and braking operation of motor.
These devices feature standard 16-bit, 5-MHz serial peripheral interface (SPI) with daisy chain capability for complete configuration and detailed diagnostics. Depending on the device, four or eight programmable PWM generators are integrated to allow for current limiting during motor operation or LED dimming control.
The device includes numerous protection and diagnostic features including an nFAULT pin to alert the system when a fault occurs. The device features a low-current open load detection (OLD) mode to detect open-load conditions when the nominal load current is small and a passive OLD mode for offline OLD. The device is also fully-protected from short-circuit, undervoltage, and over-temperature conditions.
View our full portfolio of brushed motor drivers on ti.com.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | DRV89xx-Q1 Automotive Multi-Channel Half-Bridge Drivers with Advanced Diagnostics datasheet (Rev. C) | PDF | HTML | 11 Feb 2020 |
| Application brief | Open Load Detection in Integrated Drivers (Rev. C) | PDF | HTML | 31 Mar 2022 | |
| Functional safety information | DRV8904-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | 15 Oct 2021 | ||
| Application note | Daisy Chain Implementation for Serial Peripheral Interface (Rev. A) | 07 Apr 2021 | ||
| Application brief | Using the Half-Bridge DRV89xx-Q1 as High-Side or Low-Side Switch | PDF | HTML | 26 Oct 2020 | |
| Technical article | Driving HVAC system flaps with an integrated, multichannel motor driver | PDF | HTML | 17 Feb 2020 | |
| Application note | Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) | 19 Feb 2019 | ||
| Application note | PowerPAD™ Thermally Enhanced Package (Rev. H) | 06 Jul 2018 | ||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 12 May 2004 |
For additional terms or required resources, click any title below to view the detail page where available.
The DRV8908-Q1 evaluation module (EVM) is an application board design to allow easy evaluation of the DRV8908-Q1 device. The DRV8908-Q1 device is an integrated 4.5-V to 32-V 8 channel H-bridges for automotive applications such as control of heating, ventilation, and airconditioning (HVAC) flap DC (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| HTSSOP (PWP) | 24 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.