The DAC902 is a high-speed, Digital-to-Analog Converter (DAC) offering a 12-bit resolution option within the SpeedPlus Family of high-performance converters. Featuring pin compatibility among family members, the DAC908, DAC900, and DAC904 provide a component selection option to an 8-, 10-, and 14-bit resolution, respectively. All models within this family of DACs support update rates in excess of 165MSPS with excellent dynamic performance, and are especially suited to fulfill the demands of a variety of applications.
The advanced segmentation architecture of the DAC902 is optimized to provide a high Spurious-Free Dynamic Range (SFDR) for single-tone, as well as for multi-tone signals—essential when used for the transmit signal path of communication systems.
The DAC902 has a high impedance (200k
) current output with a nominal range of 20mA and an output compliance of up to 1.25V. The differential outputs allow for both a differential or single-ended analog signal interface. The close matching of the current outputs ensures superior dynamic performance in the differential configuration, which can be implemented with a transformer.
Utilizing a small geometry CMOS process, the monolithic DAC902 can be operated on a wide, single-supply range of +2.7V to +5.5V. Its low power consumption allows for use in portable and battery-operated systems. Further optimization can be realized by lowering the output current with the adjustable full-scale option.
For noncontinuous operation of the DAC902, a power-down mode results in only 45mW of standby power.
The DAC902 comes with an integrated 1.24V bandgap reference and edge-triggered input latches, offering a complete converter solution. Both +3V and +5V CMOS logic families can be interfaced to the DAC902.
The reference structure of the DAC902 allows for additional flexibility by utilizing the on-chip reference, or applying an external reference. The full-scale output current can be adjusted over a span of 2mA to 20mA, with one external resistor, while maintaining the specified dynamic performance.
The DAC902 is available in the SO-28 and TSSOP-28 packages.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | DAC902 SpeedPlus 12-Bit 165-MSPS Digital-to-Analog Converter datasheet (Rev. B) | 29 May 2002 | |
| Analog Design Journal | Q4 2009 Issue Analog Applications Journal | 24 Sep 2018 | ||
| EVM User's guide | DAC90x Evaluation Module User's Guide | 08 Aug 2017 | ||
| Application note | Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A) | 08 May 2015 | ||
| Application note | High Speed, Digital-to-Analog Converters Basics (Rev. A) | 23 Oct 2012 | ||
| Analog Design Journal | Interfacing op amps to high-speed DACs, Part 2: Current-sourcing DACs | 04 Oct 2009 | ||
| User guide | DEM-DAC90x: Evaluation Fixture for the DAC900, DAC902, DAC904, DAC908 | 27 Sep 2000 |
For additional terms or required resources, click any title below to view the detail page where available.
High-speed digital-to-analog converters (DACs) most often use a (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOIC (DW) | 28 | Ultra Librarian |
| TSSOP (PW) | 28 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.