The BQ2969T family is a high-accuracy, low-power overvoltage protector with a 3mA regulated output supply and control / PTC input for Li-ion and LiFePO4 (LFP) battery pack applications.
Each cell in a 2-series to 4-series cell stack is individually monitored for an overvoltage condition. An internal fixed-delay timer is initiated upon detection of an overvoltage condition on any cell. Upon expiration of the delay timer, the output pin is triggered into an active state to indicate that an overvoltage condition has occurred.
The regulated output supply delivers up to 3mA output current to drive always-on circuits, such as a real-time clock (RTC) oscillator. The BQ2969T family has a self-disable function to turn off the regulated output if any cell voltage falls below a programmable undervoltage threshold, thereby preventing drain on the battery.
The BQ2969T family includes a CTL pin which can be used to assert the OUT pin upon demand. The device also supports overtemperature (OT) protection when a PTC thermistor is attached between the CTL and VDD pins on the device.
The BQ2969T family provides exceptionally low power operation, drawing only 1.23µA during normal operation (excluding regulator load current), and dropping to 0.25uA when in an undervoltage condition. Even when in the undervoltage state, the device can still detect an overvoltage condition on any other cell (which can occur in an imbalanced pack) and can assert the output pin.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | BQ2969T Overvoltage and Overtemperature Protection for 2-Series, 3-Series, and 4-Series Cell Li-Ion Batteries with LDO Output and Control / PTC Input datasheet | PDF | HTML | 13 Dec 2024 |
For additional terms or required resources, click any title below to view the detail page where available.
The BQ2969T evaluation module (EVM) is a complete evaluation system for the BQ2969T, a high accuracy, low-power overvoltage and overtemperature protector with a regulated output supply for 2-series to 4-series Li-Ion, and LiFePO4 battery packs. The EVM consists of a BQ2969T circuit module which is (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| WSON (DSG) | 8 | Ultra Librarian |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.