SLVSCP3C January 2015 – July 2016 TPS7B4253-Q1
PRODUCTION DATA.
For automotive off-board sensors and small current off-board modules, the power supply is through a long cable from the main board. In such cases, protection is required in the power devices for the off-board loads to prevent the onboard components from damage during a short to GND or short to battery caused by a broken cable. Off-board sensors require consistent power supply as onboard components to secure high accuracy of data acquisition.
The TPS7B4253-Q1 device is designed for automotive applications with a 45-V load dump. The device can either be used as one tracking low-dropout (LDO) regulator or voltage tracker to build one closed power loop for off-board sensors with an onboard main supply. The output of the device is accurately regulated by a reference voltage at the ADJ pin.
To provide an accurate power supply to the off-board modules, the device offers a 4-mV ultralow tracking tolerance between the ADJ and FB pins across temperature. The back-to-back PMOS topology eliminates the need for an external diode under reverse polarity condition. The TPS7B4253-Q1 device also includes thermal shutdown, inductive clamp, overload, and short-to-battery protection to prevent damage to onboard components during extreme conditions.
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
---|---|---|
TPS7B4253-Q1 | SO PowerPAD (8) | 4.89 mm × 3.90 mm |
HTSSOP (20) | 6.50 mm × 4.40 mm |
Changes from B Revision (January 2016) to C Revision
Changes from A Revision (August 2015) to B Revision
Changes from * Revision (January 2015) to A Revision