SLAS667C November   2009  – October 2016 TLV320AIC3100

PRODUCTION DATA.  

  1. 1 Device Overview
    1. 1.1 Features
    2. 1.2 Applications
    3. 1.3 Description
    4. 1.4 Functional Block Diagram
  2. 2 Revision History
  3. 3  Device Comparison
  4. 4 Pin Configuration and Functions
    1. 4.1 Pin Attributes
  5. 5 Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Electrical Characteristics
    6. 5.6  Power Dissipation Ratings
    7. 5.7  I2S, LJF, and RJF Timing in Master Mode
    8. 5.8  I2S, LJF, and RJF Timing in Slave Mode
    9. 5.9  DSP Timing in Master Mode
    10. 5.10 DSP Timing in Slave Mode
    11. 5.11 I2C Interface Timing
    12. 5.12 Typical Characteristics
      1. 5.12.1 Audio ADC Performance
      2. 5.12.2 DAC Performance
      3. 5.12.3 Class-D Speaker Driver Performance
      4. 5.12.4 Analog Bypass Performance H
      5. 5.12.5 MICBIAS Performance H
  6. 6 Parameter Measurement Information
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Power-Supply Sequence
      2. 7.3.2  Reset
      3. 7.3.3  Device Start-Up Lockout Times
      4. 7.3.4  PLL Start-Up
      5. 7.3.5  Power-Stage Reset
      6. 7.3.6  Software Power Down
      7. 7.3.7  Audio Analog I/O
      8. 7.3.8  Digital Processing Low-Power Modes
        1. 7.3.8.1 ADC, Mono, 48 kHz, DVDD = 1.8 V, AVDD = 3.3 V
        2. 7.3.8.2 ADC, Mono, 8 kHz, DVDD = 1.8 V, AVDD = 3.3 V
        3. 7.3.8.3 DAC Playback on Headphones, Stereo, 48 kHz, DVDD = 1.8 V, AVDD = 3.3 V, HPVDD = 3.3 V
        4. 7.3.8.4 DAC Playback on Headphones, Mono, 48 kHz, DVDD = 1.8 V, AVDD = 3.3 V, HPVDD = 3.3 V
        5. 7.3.8.5 DAC Playback on Headphones, Stereo, 8 kHz, DVDD = 1.8 V, AVDD = 3.3 V, HPVDD = 3.3 V
        6. 7.3.8.6 DAC Playback on Headphones, Mono, 8 kHz, DVDD = 1.8 V, AVDD = 3.3 V, HPVDD = 3.3 V
        7. 7.3.8.7 DAC Playback on Headphones, Stereo, 192 kHz, DVDD = 1.8 V, AVDD = 3.3 V, HPVDD = 3.3 V
        8. 7.3.8.8 DAC Playback on Line Out (10 k-Ω load), Stereo, 48 kHz, DVDD = 1.8 V, AVDD = 3 V, HPVDD = 3 V
      9. 7.3.9  Audio ADC and Analog Inputs
        1. 7.3.9.1 MICBIAS and Microphone Preamplifier
        2. 7.3.9.2 Automatic Gain Control (AGC)
        3. 7.3.9.3 Delta-Sigma ADC
        4. 7.3.9.4 ADC Decimation Filtering and Signal Processing
          1. 7.3.9.4.1 ADC Processing Blocks
          2. 7.3.9.4.2 ADC Processing Blocks - Signal Chain Details
            1. 7.3.9.4.2.1 First-Order IIR, AGC, Filter A
            2. 7.3.9.4.2.2 Five Biquads, First-Order IIR, AGC, Filter A
            3. 7.3.9.4.2.3 25-Tap FIR, First-Order IIR, AGC, Filter A
            4. 7.3.9.4.2.4 First-Order IIR, AGC, Filter B
            5. 7.3.9.4.2.5 Three Biquads, First-Order IIR, AGC, Filter B
            6. 7.3.9.4.2.6 20-Tap FIR, First-Order IIR, AGC, Filter B
            7. 7.3.9.4.2.7 First-Order IIR, AGC, Filter C
            8. 7.3.9.4.2.8 Five Biquads, First-Order IIR, AGC, Filter C
            9. 7.3.9.4.2.9 25-Tap FIR, First-Order IIR, AGC, Filter C
          3. 7.3.9.4.3 User-Programmable Filters
            1. 7.3.9.4.3.1 First-Order IIR Section
            2. 7.3.9.4.3.2 Biquad Section
            3. 7.3.9.4.3.3 FIR Section
          4. 7.3.9.4.4 ADC Digital Decimation Filter Characteristics
            1. 7.3.9.4.4.1 Decimation Filter A
            2. 7.3.9.4.4.2 Decimation Filter B
            3. 7.3.9.4.4.3 Decimation Filter C
          5. 7.3.9.4.5 ADC Data Interface
        5. 7.3.9.5 Updating ADC Digital Filter Coefficients During Record
        6. 7.3.9.6 Digital Microphone Function
        7. 7.3.9.7 DC Measurement
      10. 7.3.10 Audio DAC and Audio Analog Outputs
        1. 7.3.10.1  DAC
          1. 7.3.10.1.1 DAC Processing Blocks
          2. 7.3.10.1.2 DAC Processing Blocks — Signal Chain Details
            1. 7.3.10.1.2.1  Three Biquads, Filter A
            2. 7.3.10.1.2.2  Six Biquads, First-Order IIR, DRC, Filter A or B
            3. 7.3.10.1.2.3  Six Biquads, First-Order IIR, Filter A or B
            4. 7.3.10.1.2.4  IIR, Filter B or C
            5. 7.3.10.1.2.5  Four Biquads, DRC, Filter B
            6. 7.3.10.1.2.6  Four Biquads, Filter B
            7. 7.3.10.1.2.7  Four Biquads, First-Order IIR, DRC, Filter C
            8. 7.3.10.1.2.8  Four Biquads, First-Order IIR, Filter C
            9. 7.3.10.1.2.9  Two Biquads, 3D, Filter A
            10. 7.3.10.1.2.10 Five Biquads, DRC, 3D, Filter A
            11. 7.3.10.1.2.11 Five Biquads, DRC, 3D, Beep Generator, Filter A
          3. 7.3.10.1.3 DAC User-Programmable Filters
            1. 7.3.10.1.3.1 First-Order IIR Section
            2. 7.3.10.1.3.2 Biquad Section
          4. 7.3.10.1.4 DAC Interpolation Filter Characteristics
            1. 7.3.10.1.4.1 Interpolation Filter A
            2. 7.3.10.1.4.2 Interpolation Filter B
            3. 7.3.10.1.4.3 Interpolation Filter C
        2. 7.3.10.2  DAC Digital-Volume Control
        3. 7.3.10.3  Volume Control Pin
        4. 7.3.10.4  Dynamic Range Compression
          1. 7.3.10.4.1 DRC Threshold
          2. 7.3.10.4.2 DRC Hysteresis
          3. 7.3.10.4.3 DRC Hold Time
          4. 7.3.10.4.4 DRC Attack Rate
          5. 7.3.10.4.5 DRC Decay Rate
          6. 7.3.10.4.6 Example Setup for DRC
        5. 7.3.10.5  Headset Detection
        6. 7.3.10.6  Interrupts
        7. 7.3.10.7  Key-Click Functionality With Digital Sine-Wave Generator (PRB_P25)
        8. 7.3.10.8  Programming DAC Digital Filter Coefficients
        9. 7.3.10.9  Updating DAC Digital Filter Coefficients During PLAY
        10. 7.3.10.10 Digital Mixing and Routing
        11. 7.3.10.11 Analog Audio Routing
          1. 7.3.10.11.1 Analog Output Volume Control
          2. 7.3.10.11.2 Headphone Analog-Output Volume Control
          3. 7.3.10.11.3 Class-D Speaker Analog Output Volume Control
        12. 7.3.10.12 Analog Outputs
          1. 7.3.10.12.1 Headphone Drivers
          2. 7.3.10.12.2 Speaker Drivers
        13. 7.3.10.13 Audio-Output Stage-Power Configurations
      11. 7.3.11 CLOCK Generation and PLL
        1. 7.3.11.1 PLL
      12. 7.3.12 Timer
      13. 7.3.13 Digital Audio and Control Interface
        1. 7.3.13.1 Digital Audio Interface
          1. 7.3.13.1.1 Right-Justified Mode
          2. 7.3.13.1.2 Left-Justified Mode
          3. 7.3.13.1.3 I2S Mode
          4. 7.3.13.1.4 DSP Mode
        2. 7.3.13.2 Primary and Secondary Digital Audio Interface Selection
        3. 7.3.13.3 Control Interface
          1. 7.3.13.3.1 I2C Control Mode
    4. 7.4 Register Map
      1. 7.4.1 TLV320AIC3100 Register Map
      2. 7.4.2 Registers
        1. 7.4.2.1 Control Registers, Page 0 (Default Page): Clock Multipliers, Dividers, Serial Interfaces, Flags, Interrupts, and GPIOs
        2. 7.4.2.2 Control Registers, Page 1: DAC and ADC Routing, PGA, Power-Controls, and MISC Logic-Related Programmability
        3. 7.4.2.3 Control Registers, Page 3: MCLK Divider for Programmable Delay Timer
        4. 7.4.2.4 Control Registers, Page 4: ADC Digital Filter Coefficients
        5. 7.4.2.5 Control Registers, Page 8: DAC Digital Filter Coefficients
        6. 7.4.2.6 Control Registers, Page 9: DAC Digital Filter Coefficients
        7. 7.4.2.7 Control Registers, Page 12: DAC Programmable Coefficients Buffer B (1:63)
        8. 7.4.2.8 Control Registers, Page 13: DAC Programmable Coefficients RAM Buffer B (65:127)
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Receiving Notification of Documentation Updates
    2. 11.2 Community Resources
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical Packaging and Orderable Information
    1. 12.1 Packaging Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

1 Device Overview

1.1 Features

  • Stereo Audio DAC With 95-dB SNR
  • Mono Audio ADC With 91-dB SNR
  • Supports 8-kHz to 192-kHz Separate DAC and ADC Sample Rates
  • Mono Class-D BTL Speaker Driver (2.5 W Into
    4 Ω or 1.6 W Into 8 Ω)
  • One Differential and Three Single-Ended Inputs With Mixing and Level Control
  • Microphone With Bias, Preamp PGA, and AGC
  • Built-In Digital Audio Processing Blocks (PRB) With User-Programmable Biquad and FIR Filters
  • Digital Mixing Capability
  • Programmable Digital Audio Processor for Bass Boost/Treble/EQ With up to Five Biquads for Record and up to Six Biquads for Playback
  • Pin Control or Register Control for Digital-Playback Volume-Control Settings
  • Digital Sine-Wave Generator for Beep
  • Integrated PLL Used for Programmable Digital Audio Processor
  • I2S, Left-Justified, Right-Justified, DSP, and TDM Audio Interfaces
  • I2C Control With Register Auto-Increment
  • Full Power-Down Control
  • Power Supplies:
    • Analog: 2.7 V–3.6 V
    • Digital Core: 1.65 V–1.95 V
    • Digital I/O: 1.1 V–3.6 V
    • Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD)
  • 5-mm × 5-mm 32-QFN Package

1.2 Applications

  • Portable Audio Devices
  • Mobile Internet Devices
  • Adaptive Filtering Applications

1.3 Description

The TLV320AIC3100 is a low-power, highly integrated, high-performance codec which provides a stereo audio DAC, a mono audio ADC, and a mono class-D 4-Ω speaker driver.

The TLV320AIC3100 features a high-performance audio codec with 24-bit stereo playback and monaural record functionality. The device integrates several analog features, such as a microphone interface, headphone drivers, and speaker drivers. The TLV320AIC3100 has built-in digital audio processing blocks (PRB) for both the DAC and ADC paths. The digital audio data format is programmable to work with popular audio standard protocols (I2S, left/right-justified) in master, slave, DSP, and TDM modes. Bass boost, treble, or EQ can be supported by the programmable digital signal-processing block. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by either pin control or by register control. The audio functions are controlled using the I2C serial bus.

The TLV320AIC3100 has a programmable digital sine-wave generator and is available in a 32-pin QFN package.

Device Information(1)

PART NUMBER PACKAGE BODY SIZE (NOM)
TLV320AIC3100 VQFN (32) 5.00 mm × 5.00 mm
  1. For all available packages, see the orderable addendum at the end of the data sheet.

1.4 Functional Block Diagram

TLV320AIC3100 B0205-08_LAS667.gif