TIDT236 March   2022 TPS7H1101A-SP

 

  1.   Description
  2. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Dimensions
  3. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Thermal Images
  4. 3Waveforms
    1. 3.1 Switching
    2. 3.2 Output Voltage Ripple
    3. 3.3 Load Transients
    4. 3.4 Start-up Sequence

Description

This reference design utilizes a synchronous buck regulator with internal top and bottom FETs, which is configured as a synchronous inverting buck-boost converter to provide an adjustable output of between –0.2 V and –0.6 V capable of delivering a maximum of 15 A of current to the load. The output voltage is adjusted by either providing a PWM signal or analog voltage signal to the –Vout Adj connector, referenced to GND. See the Board Schematic for details regarding voltages.

GUID-20210311-CA0I-F7ZP-BSWN-MXJDK69K5WZP-low.jpgTop Side of PCB
GUID-20210311-CA0I-RVZB-VMXB-QXLRRMC3TJTT-low.jpgBottom Side of PCB
GUID-20210311-CA0I-CSHC-VZTV-9RF6BXC7KLFJ-low.png Board Schematic